Hawke礦用防爆格蘭（Hawke 453/Univ Cable Gland）
Hawke礦用防爆格蘭（Hawke 453/Univ Cable Gland）
Hawke礦用防爆格蘭（Hawke 453/Univ Cable Gland）
上海頤品自動(dòng)化，：
Hawke礦用防爆格蘭（Hawke 453/Univ Cable Gland）
Hawke礦用防爆格蘭（Hawke 453/Univ Cable Gland）
Hawke礦用防爆格蘭（Hawke 453/Univ Cable Gland）
上海頤品自動(dòng)化，：
Hawke 453/Univ Cable Gland
Flameproof Exd / Increased Safety Exe / Dual Certified ATEX - IECEx
Application
Mining..
For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables.
For particular use with cables that exhibit ‘cold flow’ characteristics.
Ordering Format [ Gland Type / Size / Thread / Material / Options ]
Example without options: 453/UNIV / C / M32 / Brass
Example with alternative clamping ring option: 453/UNIV / C / 1¼" NPT / Brass / AR
Features
Provides armour clamping using one clamping arrangement for all armour/braid types.
Provides a diaphragm seal on the cables inner sheath which will not damage cable that has ‘cold flow’ characteristics.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.
Materials & Finishes
The 453/Universal cable gland is manufactured in Brass (standard), Nickel Plated Brass or 316 Stainless Steel. Brass NPT entries are nickel plated as standard.
Technical Data
- Flameproof Exd and Increased Safety Exe
IM2 - Certificate No's
Baseefa08ATEX0330X and IECEx BAS 08.0014X. - Suitable for use in:
Mines. - Construction and Test Standards:
IEC/EN 60079-0, IEC/EN 60079-1 and IEC/EN 60079-7. - Ingress Protection:
IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529. - Operating Temperature Range:
-60°C to +80°C - Assembly Instruction Sheet:
AI 371.
| CABLE GLAND SELECTION TABLE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size Ref. | Entry Thread Size | Cable Acceptance Details | ‘G’ Compressed Length | Hexagon Dimensions | ||||||||
| Inner Sheath ‘A’ | Outer Sheath ‘B’ | ‘C’ Armour/Braid | ||||||||||
| Metric | NPT * | Across Flats | Across Corners | |||||||||
| Standard | Option | Min. | Max. | Min. | Max. | Orientation 1 | Orientation 2 | |||||
| Os | M20 | ½" | - | 3.5 | 8.1 | 5.5 | 12.0 | 0.8 / 1.25 | 0 / 0.8 | 61.6 | 24.0 | 26.5 |
| O | M20 | ½" | - | 6.5 | 11.5 | 9.5 | 16.0 | 0.8 / 1.25 | 0 / 0.8 | 61.6 | 24.0 | 26.5 |
| A | M20 | ¾" | ½" | 8.4 | 14.3 | 12.5 | 20.5 | 0.8 / 1.25 | 0 / 0.8 | 63.0 | 30.0 | 32.5 |
| B | M25 | 1" | ¾" | 11.1 | 19.7 | 16.9 | 26.0 | 1.25 / 1.6 | 0 / 0.7 | 69.9 | 36.0 | 39.5 |
| C | M32 | 1¼" | 1" | 17.6 | 26.5 | 22.0 | 33.0 | 1.6 / 2.0 | 0 / 0.7 | 73.2 | 46.0 | 50.5 |
| C2 | M40 | 1½" | 1¼" | 23.1 | 32.5 | 28.0 | 41.0 | 1.6 / 2.0 | 0 / 0.7 | 77.9 | 55.0 | 60.6 |
| D | M50 | 2" | 1½" | 28.9 | 44.4/42.3 † | 36.0 | 52.6 | 1.8 / 2.5 | 0 / 1.0 | 93.5 | 65.0 | 70.8 |
| E | M63 | 2½" | 2" | 39.9 | 56.3/54.3 † | 46.0 | 65.3 | 1.8 / 2.5 | 0 / 1.0 | 94.0 | 80.0 | 88.0 |
| F | M75 | 3" | 2½" | 50.5 | 68.2/65.3 † | 57.0 | 78.0 | 1.8 / 2.5 | 0 / 1.0 | 101.0 | 95.0 | 104.0 |
| All dimensions in millimetres (except * where dimensions are in inches). Metric entry threads are 1.5mm pitch as standard. † Smaller value is applicable when selecting reduced NPT entry option. | ||||||||||||
{C}
| Alternative reversible armour clamping ring (RAC) Selection Table | ||
|---|---|---|
| Size Ref. | Steel Wire Armour/Braid/Tape | |
| Orientation 1 | Orientation 2 | |
| B | 0.9 / 1.25 | 0.5 / 0.9 |
| C | 1.2 / 1.6 | 0.6 / 1.2 |
| C2 | 1.2 / 1.6 | 0.6 / 1.2 |
| D | 1.45 / 1.8 | 1.0 / 1.45 |
| E | 1.45 / 1.8 | 1.0 / 1.45 |
| F | 1.45 / 1.8 | 1.0 / 1.45 |
本溪|
石屏县|
固镇县|
罗平县|
淮南市|
鄂尔多斯市|
金川县|
友谊县|
宝鸡市|
东安县|
墨江|
新密市|
伽师县|
莆田市|
延安市|
滦南县|
东辽县|
响水县|
景德镇市|
定州市|
陆川县|
密云县|
周宁县|
依安县|
鲁山县|
江北区|
南木林县|
中阳县|
临猗县|
佛坪县|
武夷山市|
鄂伦春自治旗|
连平县|
措勤县|
普格县|
清远市|
牡丹江市|
东乌珠穆沁旗|
和顺县|
盈江县|
五原县|