Hawke防爆格蘭(501/414 Cable Gland)
Hawke防爆格蘭(501/414 Cable Gland)
Hawke防爆格蘭(501/414 Cable Gland)
上海頤品自動化,:
Hawke 501/414 Cable Gland
Flameproof Exd / Increased Safety Exe / Dust Extb / Dual Certified ATEX - IECEx
Application:Outdoor or indoor use.
For use with non-armoured elastomer and plastic insulated cables installed in conduit.
Ordering Format [ Gland Type / Size / Male Thread / Female Thread / Material / Options ]
Example without options: 501/414 / C / M32 / M32 / Brass
Example with alternative seal option: 501/414 / C / 1 1¼" NPT / M32 / Brass / S
Features
Provides a cable retention seal onto the cables outer sheath.
When used in increased safety applications, this cable gland may be used with braided cable where the braid and the cables outer sheath pass into the enclosure. The braid must be suitably terminated into the enclosure.
Provides female running coupler for cable gland or conduit entry.
Materials & Finishes
The 501/414 cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard.
Technical Data
- Exd IIC Gb, Exe IIC Gb, Extb IIIC Db
- Certificate No's
Baseefa06ATEX0056X and IECEx BAS 06.0013X. - Suitable for use in:
Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC. - Construction and Test Standards:
IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7 and IEC/EN 60079-31. - Ingress Protection:
IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X. - Deluge Protection to:
DTS01 - Operating Temperature Range:
-60°C to +100°C - Assembly Instruction Sheet:
AI 310.
| CABLE GLAND SELECTION TABLE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size Ref. | Male Entry Thread Size | Female Entry Thread Size | Cable Acceptance Details | ‘G’ Compressed Length | Hexagon Dimensions | |||||||
| Outer Sheath ‘B’ | ||||||||||||
| Metric | NPT * | Metric | NPT # | Standard Seal | Alternative (S) Seal | Across Flats | Across Corners | |||||
| Standard | Option | Min. | Max. | Min. | Max. | |||||||
| Os | M20 ‡ | ½" | - | M20 | - | 3.0 | 8.0 | - | - | 54.5 | 24.0 | 26.5 |
| O | M20 ‡ | ½" | - | M20 | - | 6.5 | 11.9 | - | - | 54.5 | 24.0 | 26.5 |
| A | M20 | ¾" | ½" | M20 | - | 10.0 | 14.3 | 9.0 | 13.4 | 56.4 | 30.0 | 32.5 |
| B | M25 | 1" | ¾" | M25 | - | 13.0 | 20.2 | 9.5 | 15.4 | 48.2 | 36.0 | 39.5 |
| C | M32 | 1¼" | 1" | M32 | - | 19.0 | 26.5 | 15.5 | 21.2 | 61.6 | 46.0 | 50.5 |
| C2 | M40 | 1½" | 1¼" | M40 | - | 25.0 | 32.5 | 22.0 | 28.0 | 64.6 | 55.0 | 60.6 |
| D | M50 | 2" | 1½" | M50 | - | 31.5 | 44.4/42.3 † | 27.5 | 34.8 | 83.2 | 65.0 | 70.8 |
| E | M63 | 2½" | 2" | M63 | - | 42.5 | 56.3/54.3 † | 39.0 | 46.5 | 83.2 | 80.0 | 88.0 |
| F | M75 | 3" | 2½" | M75 | - | 54.5 | 68.2/65.3 † | 49.5 | 58.3 | 86.4 | 95.0 | 104.0 |
| All dimensions in millimetres (except * where dimensions are in inches). Metric entry threads are 1.5mm pitch as standard. † Smaller value is applicable when selecting reduced NPT entry option. Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable inner sheath diameter is 10.9mm # NPT female thread sizes equivalent to those shown in the table for the male thread size are available. Hexagon dimensions as shown may alter. | ||||||||||||






































循化|
鲁山县|
万年县|
安义县|
江阴市|
观塘区|
息烽县|
定州市|
潞西市|
河津市|
巴林左旗|
巴林右旗|
南漳县|
安陆市|
巴塘县|
玉溪市|
博湖县|
白银市|
富锦市|
德清县|
博野县|
湾仔区|
石屏县|
宜宾县|
宾阳县|
泌阳县|
嘉荫县|
灵武市|
邮箱|
达尔|
隆林|
柳州市|
上杭县|
宜都市|
涿州市|
抚州市|
哈密市|
景德镇市|
乌恰县|
海宁市|
商洛市|