Hawke防爆格蘭(Hawke 501/423 Cable Gland)
Hawke防爆格蘭(Hawke 501/423 Cable Gland)
Hawke防爆格蘭(Hawke 501/423 Cable Gland)
上海頤品自動(dòng)化,:
Hawke 501/423 Cable Gland
Flameproof Exd / Increased Safety Exe / Dust Extb / Dual Certified ATEX - IECEx
Application:The 501/423 cable gland provides two independent seals on non-armoured elastomer and plastic insulated cables. The first is a flameproof seal on the inner or outer cable sheath, with an additional IP seal on the outer sheath. The cable gland is dual certified Exd and Exe and is suitable for installation in Zone 1 (21) and Zone 2 (22) hazardous areas.
Ordering Format [ Gland Type / Size / Thread / Material / Options ]
Example without options: 501/423 / C / M32 / Brass
Example with alternative seal option: 501/423 / C / 1¼" NPT / Brass / S
Features
Provides superior cable retention to standard unarmoured cable glands, with seal at two independent points. When used in increased safety applications, this cable gland may be used with braided cable where the braid and the outer sheath pass into the enclosure. The braid must be suitably terminated inside the enclosure.
Materials & Finishes
The 501/423 cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard.
Technical Data
- Exd IIC Gb, Exe IIC Gb, Extb IIIC Db
- Certificate No's
Baseefa06ATEX0056X and IECEx BAS 06.0013X. - Suitable for use in:
Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC. - Construction and Test Standards:
IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7 and IEC/EN 60079-31. - Ingress Protection:
IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X. - Deluge Protection to:
DTS01 - Operating Temperature Range:
-60°C to +100°C - Assembly Instruction Sheet:
AI 306.
| CABLE GLAND SELECTION TABLE | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size Ref. | Entry Thread Size | Thread Length ‘H’ | Cable Acceptance Details | ‘G’ Compressed Length | Hexagon Dimensions | ||||||
| Outer Sheath ‘B’ | |||||||||||
| Metric | NPT * | Standard Seal | Alternative (S) Seal | Across Flats | Across Corners | ||||||
| Standard | Option | Min. | Max. | Min. | Max. | ||||||
| Os | M20 ‡ | ½" | - | 15.0 | 3.2 | 8.0 | - | - | 40.0 | 24.0 | 26.5 |
| O | M20 ‡ | ½" | - | 15.0 | 6.5 | 11.9 | - | - | 40.0 | 24.0 | 26.5 |
| A | M20 | ¾" | ½" | 15.0 | 10.0 | 14.3 | 9.0 | 13.5 | 40.4 | 30.0 | 32.5 |
| B | M25 | 1" | ¾" | 15.0 | 13.0 | 20.2 | 9.5 | 15.4 | 44.3 | 36.0 | 39.5 |
| C | M32 | 1¼" | 1" | 15.0 | 19.5 | 26.5 | 15.5 | 21.2 | 47.2 | 46.0 | 50.5 |
| C2 | M40 | 1½" | 1¼" | 15.0 | 25.0 | 32.5 | 22.0 | 28.0 | 49.5 | 55.0 | 60.6 |
| D | M50 | 2" | 1½" | 15.0 | 31.5 | 44.4/42.3 † | 27.5 | 34.8 | 72.5 | 65.0 | 70.8 |
| E | M63 | 2½" | 2" | 15.0 | 42.5 | 56.3/54.3 † | 39.0 | 46.5 | 64.8 | 80.0 | 88.0 |
| F | M75 | 3" | 2½" | 15.0 | 54.5 | 68.2/65.3 † | 49.5 | 58.3 | 68.0 | 95.0 | 104.0 |
| G | M80 | 3½" | - | 20.0 | 67.0 | 73.0 | - | - | 68.0 | 106.4 | 115.0 |
| H | M90 | 3½" | - | 20.0 | 67.0 | 77.6 | - | - | 68.0 | 115.0 | 130.0 |
| J | M100 | 4" | - | 20.0 | 75.0 | 91.6 | - | - | 68.0 | 127.0 | 142.0 |
| All dimensions in millimetres (except * where dimensions are in inches). Os - F size metric entry threads are 1.5mm pitch as standard. For G size Cable Glands and above, a 2mm pitch is supplied as standard (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering. † Smaller value is applicable when selecting reduced NPT entry option. ‡ Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable outer sheath diameter is 10.9 mm. | |||||||||||






































长海县|
兰考县|
衡东县|
察雅县|
德格县|
宁德市|
卓资县|
五华县|
古交市|
永昌县|
台中县|
兴山县|
榆树市|
忻城县|
武陟县|
邵东县|
汶川县|
正宁县|
鹤壁市|
乐至县|
治县。|
华宁县|
沭阳县|
宝坻区|
神农架林区|
双峰县|
揭西县|
丰顺县|
桂平市|
磐石市|
新余市|
平定县|
麦盖提县|
泗阳县|
环江|
闻喜县|
叶城县|
兴义市|
葫芦岛市|
平罗县|
青田县|