STX-RLINK編程器 原廠ST進口

STX-RLINK編程器 原廠ST進口

STX-RLINK

Raisonance’s in-circuit debugger/programmer for STM8, ST7, STM32, STR7 and STR9

Features

• In-circuit debugging and programming

• Connection to application board via JTAG, SWD, ST SWIM or ICC interface

• USB interface to host PC

• Powered from USB

Description

The RLink (STX-RLINK) is Raisonance’s versatile, low-cost, in-circuit debugger and programmer for a complete range of STMicroelectronics microcontrollers (STM8, ST7, STM32, STR7 and STR9). It connects to application or evaluation boards for in-circuit programming and debugging via an industry standard JTAG-SWD connection for ARM^® core-based microcontrollers, via STMicroelectronics’ SWIM connection for STM8, or via an in-circuit communication (ICC) connection for ST7 microcontrollers. ST72Cxxxx devices are not supported.

The RLink, driven by Raisonance’s Ride7 integrated development environment provides both unlimited in-circuit debugging and programming of applications for STM8 and ST7. The RLink allows in-circuit debugging of STM32, STR7 and STR9 MCUs with debug code limitation up to 1/2 the size of the device Flash if Flash is less than or equal to 64 Kbytes, or up to 64 Kbytes if Flash is more than 64 Kbytes.

In combination with Raisonance’s free RFlasher7 programming software, RLink can also be used as a very-low cost, dedicated in-circuit programmer for STM8, ST7, STM32, STR7 and STR9 microcontrollers.

Complete software tool sets are provided by download at www.raisonance。。ｃｏｍ.

Data brief

The RLink does not include trace support for ARM® core-based devices with Embedded Trace Macrocell™ such as STR9.

April 2013 Doc ID 11967 Rev 6 1/5

For further information contact your local STMicroelectronics sales office. www.st。。ｃｏｍ

Architecture STX-RLINK

Architecture

RLink - Raisonance’s in-circuit debugging and programming tool supports SWIM, ICC, JTAG and SWD protocols and connects to your application board via one of the two adapters which provide the following connections:

• 4-pin SWIM adapter for STM8, and 10-pin ICC adapter for ST7

• 20-pin JTAG-SWD adapter for STM32 (JTAG-SWD), STR7 and STR9 (JTAG)

C compiler toolsets - Raisonance provides C compilers tailored to the complete range of supported microcontroller families. Compilers are fully optimizing and seamlessly integrated into Ride7, eliminating the need to edit complicated scripts and maximizing ease of use.

Toolsets include:

• Raisonance C compiler for STM8 and ST7 (RKit-STM8), which features zero-page auto relocation for code size and performance optimization that is tailored to the architecture of these devices. The compiler chain is available from Raisonance in a free version (RKit-STM8 Basic license) that outputs code up to 2 Kbytes (effective date April 1st, 2013). Compiling code up to 32 Kbytes of code requires the RKit-STM8 Lite license. The RKit-STM8 Enterprise license allows compiling without limitation. For more information, see www.raisonance。。ｃｏｍ.

• Raisonance GNU C/C++ compiler, which supports with no limitation the full range of ST ARM^® core-based microcontrollers in the STM32, STR9 and STR7 families.

Raisonance’s software - RLink can be driven by Raisonance’s integrated development environment (Ride7) or by other tools such as RFlasher7, some inline programming applications and ST tools (STVD and STVP).

• Ride7 - Drives the RLink and offers seamless control of software development tools (project manager, editor, compiler, assembler, linker, debugger, etc.) from an intuitive graphical interface.

It offers full integration of the relevant C/C++ toolsets, project management, code editor and SIMICE instruction set simulator.

The RBuilder feature allows users to rapidly configure device peripherals in a GUI and generate the C source code for peripherals at the click of a button, without writing a single line of code.

The optional CodeCompressor allows post-link optimization of the entire applications code using optimizations like in-lining, factorizing and peepholing, which can reduce application code by 5 to 15%.

• RFlasher7 - Raisonance’s easy-to-use device programming interface drives RLink and allows users to erase, program, view and verify microcontroller memory. RFlasher7 also includes automated mode for automatic execution of programming sequences for mass programming and project mode that allows users to save their programming configurations. In this operating mode, tasks such as:

–   Flash memory erasing and programming

–   Flash or RAM memory dumping

–   Blank check, programming verifications

–   Mass programming process

become intuitive and can be achieved with only a few clicks.

2/5 Doc ID 11967 Rev 6

STX-RLINK Ride7 integrated development environment

Ride7 integrated development environment

All packages include:

• Free downloads of evaluation versions from www.support-raisonance。。ｃｏｍ

• Free RFlasher7 programming software

• Color syntax highlighting editor

• Project manager

• High-level language debugging

Ride7 for STM32, STR7 and STR9 (Ride7 and RKit-ARM Lite)

• GNU C/C++ toolset for ARM

• SIMICE simulator

• Available in free evaluation version that includes the unlimited GNU C/C++ compiler.

• Debugging of supported ARM core-based 32-bit devices limited to up to 1/2 the size of the device Flash if Flash is less than or equal to 64 Kbytes, or up to 64 Kbytes if Flash is more than 64 Kbytes. For an unlimited debugging of ARM^® core-based MCUs, RKit-ARM Lite license can be upgraded to the RKit-ARM Enterprise license (see www.raisonance。。ｃｏｍ).

Ride7 for STM8 and ST7 (Ride7 and RKit-STM8 Lite)

• Raisonance STM8/ST7 C compiler: free version with output limitation to 2 Kbytes (RKit-STM8 Basic license); compiling more than 2 Kbytes of code requires the RKit-STM8 Lite or the Enterprise license. See www.raisonance。。ｃｏｍ for more information.

• SIMICE simulator

• RBuilder application builder for quick, easy configuration of peripherals and generation of associated application source code (requires use of a C compiler).

• Supports CodeCompressor, Raisonance’s optional post-link code optimizer. Applies optimizations such as inlining, factorization and peepholing.

• Available in free evaluation version with unlimited debugging.

Ordering information

Raisonance development tools can be ordered from Raisonance or from your nearest ST Distributor or sales office.

When ordering the RLink from ST, use the STX-RLINK order code.

For more information, documentation and downloads, refer to www.raisonance。。ｃｏｍ. For supported microcontrollers, refer to www.raisonance。。ｃｏｍ or the STMicroelectronics microcontroller support site, www.st。。ｃｏｍ/mcu.

Doc ID 11967 Rev 6 3/5

Revision history STX-RLINK

Revision history

***************************************************

聯 系 人 ;雷 俊 （先 生）

深圳博瑞圖電子科技有限公司

0755-36675904

MOB:13823138950

0755-83244576

ADD:深圳市福田區中航路世紀匯都會軒1416室

: 401512450

網     址：www.szprotools。。ｃｏｍ

***************************************************

承接銷售元器件IC一條龍、專注10年