SM 400 XL切割式研磨儀 

Cutting mills are suitable for the grinding of soft, medium-hard, tough, elastic, fibrous, and heterogeneous mixes of products. The Cutting Mill SM 400 XL is ideally suited for pre-cutting of large sample pieces but, depending on the application,  may also achieve the required fineness in one step.

The high torque of the new 3 kW drive with flywheel mass allows for an exceptionally effective preliminary size reduction of heterogeneous mixtures, such as waste or electronic components.

The cutting mill is used successfully for a great variety of materials. The sample is only moderay warmed up during the grinding process so that the mill is perfectly suitable for grinding temperature-sensitive materials.  Due to the large open surface of the 240 mm x 240 mm bottom sieve, it is possible to grind large sample quantities and to increase the throughput.

When operated with the optional cyclone-suction-combination, the SM 400 XL is also suitable for grinding light sample materials. In combination with the wide choice of bottom sieves, hoppers and collecting vessels, the mill can be easily adapted to varying application requirements.

SM 400 XL切割式研磨儀 

應用實例

動物飼料, 原料混合劑, 塑料, 塑料玩具, 廢料, 木頭, 樹脂, 植物原料, 橡膠, 燃料廢料, 瓶胚, 電子元件, 電纜, 皮革, 稻草, 箔, 紙張, 紙板, 紡織品, 聚合物, 藥品, 褐煤, 進樣小球, 鋁爐渣, 非鐵金屬, 食物, 香料, 骨頭, ... 更多應用

優點

• powerful size reduction thanks to 3 kW drive
• 的切割效果
• accepts large feed sizes up to 170 mm x 220 mm
• quick and easy cleaning due to fold-back hopper, smooth surfaces
• defined final fineness due to bottom sieves with aperture sizes from 1 - 20 mm

性能指標

Please note:
受樣品材料性質和儀器配置/設定的影響

作用原理

Size reduction in the Cutting Mill SM 400 XL takes place by cutting and shearing forces. The sample hits the rotor and is comminuted between the blades and the stationary cutting bars inserted in the housing.

Thanks to the wide range of accessories, the SM 400 XL can be easily adapted to different application requirements 
 

根據技術改造和誤差調整