DWYER 200系列壓力計(jì)

Dwyer® SERIES 200 & 300 solid plastic stationary gages, or draft gages, are offered in inclined and vertical (well-type) styles for highly accurate laboratory or general industrial service, for measurement of low range gas and air pressures, positive, negative or differential. To assure the accuracy required in instruments of this type, all machining of bores and wells is to the highest standards of precision backed by Dwyer's years of experience in the fabrications of acrylic instruments. 

Click here, if you require a Safety Data Sheet for the Red Gage Fluid.

Product Applications
Low pressure laboratory and industrial service applications Ordering
 Features
 Support Library
 Drawings
 Accessories
 Model Chart
 FAQ
 Related Products
 Photo Downloads
 Models & Ordering
Filter By
Inclined Style
 
Vertical Style
 
DWYER 200系列壓力計(jì)
Sort by  Model Number Popularity 

Model Description 
200.5  Solid plastic stationary gage, range .10-0-1.0" w.c., .01 minor div., 8-1/4" scale, 3 lb 11 oz. 
201  Solid plastic stationary gage, range .05-0-.50" w.c., .01 minor div., 5-1/2" scale, 2 lb 12 oz. 
202.5  Solid plastic stationary gage, range .20-0-2.0" w.c., .01 minor div., 8-3/4" scale, 4 lb 7 oz. 
209  Solid plastic stationary gage, range .20-0-3.0" w.c., .02 minor div., 8-3/4" scale, 4 lb 11 oz. 
215  Solid plastic stationary gage, range .05-0-.25" w.c., .005 minor div., 6" scale, 2 lb 14 oz. 
244  Solid plastic stationary gage, range 0-4" w.c., .02 minor div., 13-1/4" scale, 9 lb 11 oz. 
246  Solid plastic stationary gage, range 0-6" w.c., .02 minor div., 20" scale, 13 lb 14 oz. 
Features
1" Thick Acrylic Plastic Body is a solid block, virtually unbreakable, stable and free of the danger of distortion. 
Drilled Bore Accurate to ±.0002" free of bends or crooks, will not require recalibration because of distortion. 
Selected Gage Fluid with high wetability characteristics forms a consistent, well shaped meniscus for most accurate readability. 
Adjustable Reflective Polished Aluminum Scales with thumbscrew locking for easy zeroing. 
Parallax-Free Reading for maximum accuracy and consistency is achieved by simply aligning the meniscus with its image reflected in the scale. 
Over-Pressure Safety Traps prevent loss of fluid due to over range pressures or surges in pressure. (Not required on No. 215.) 
Leveling Adjustment for inclined style gages is achieved by simply loosening a locking thumb screw on the side or bottom of the gage, adjusting with reference to the integral sensitive ground glass bubble level and retightening. 
Heavy Gage Steel Mounting Panels are gray hammerloid finished. 
Precision Built assures device meets the highest standards 

DWYER 200系列壓力計(jì)