CIRS動態胸腔體膜 CIRS008A模體 CIRS體模008A

是一種精密的研究和減少腫瘤在肺內運動的影響的儀器。它提供了已知的，準確的和可重復的三維目標運動的組織等效幻影。它的設計是為了 分析圖像引導放射 中的圖像采集、規劃和劑量傳遞。這個幻體在形狀、比例和組成上代表了一個普通的人類。將裝有球形目標和或各種探測器的肺等效棒插入幻影體的肺等效葉中。身體連接到運動執行器盒，通過肺等效棒的直線平移和旋轉，誘導三維目標運動。由于它與周圍物質的密度匹配，放射學上看不出棒子本身的運動。給定目標的密度差，可以求解目標及其運動。目標和代理運動由CIRS運動控制軟件獨立控制。圖形用戶界面提供了無限多樣的運動，同時簡化了操作的動態胸腔幻影直觀的水平 參考單獨的CIRS腔和放大器;可用于插入選項008A-06-CVXX-XX的可用腔室插頭代碼列表

CIRS動態胸腔體膜 CIRS008A模體 CIRS體模008A

Features and Benefits

• Complex 3D tumor motion within the lung
• Sub-millimeter accuracy and reproducibility
• Motion software enables different cycles, amplitudes and wave forms
• Tissue equivalent from 50 keV to 25 MeV
• Compatible with TLD, MOSFET, Dose Gel, micro-chamber, PET/CT targets and film
• Surrogate breathing platform accommodates numerous gating devices
• Graphical user interface simplifies operation of the Model 008A
• Instantly Start, Stop, Pause or Loop motion
• Adjust motion amplitude, cycle time and phase shift with pull downmenus and slider bars
• Real-time display of target and surrogate motion parameters

CIRS動態胸腔體膜 CIRS008A模體 CIRS體模008A

Technical Specifications

• Dimensions: 67 cm x 32 cm x 28 cm (26" x 13" x 11")
• Weight: 17.2 kg (46 lb)
• Power: 110-250 VAC, 50/60 Hz
• Amplitude, IS: ± 25 mm
• Amplitude, AP/LR: ± 10 mm
• Amplitude, Surrogate: ± 25 mm
• Max. Surrogate Platform Load: 5.4 kg (12 lb)
• Motion Accuracy: ± 0.1 mm
• Cycle Time: 1 - ∞ (adjusted based on amplitude)
• Waveforms: sin(t), 1-2cos^4(t), 1-2cos^6(t), sawtooth, sharkfin

System Requirements

• Windows XP® / Vista / Windows 7 (32 Bit Versions only)
• Pentium 3® or equivalent
• 512 MB RAM
• 2 MB of available disk space

Materials Included

• (1) Control unit with firmware installed (110 - 220V, 50 - 60Hz)
• (1) Motion actuator box
• (1) Gating actuator box
• (1) base plate)
• (1) CIRS Motion Control Software CD-Rom
• (1) 1/8 hex key wrench
• (1) Four in one screwdriver
• (1) Network cable CAT5e, 75’
• (1) DB 25 male to male cable
• (1) USB cable 1’ A/B male
• (2) USB extender terminals
• (1) Bag of miscellaneous replacement fasteners
• (2) 2 Amp fast acting fuses
• (1) Power cord
• (1) User’s manual
• (1) Carry Case
•