一、簡介：

管材靜液壓試驗機用于測定熱塑性管材、復合管材 （如PP-R、PP-B、PP-A、PE、PE-X、PVC、PVC-U、PVC-C及鋁塑復合管等各種管材）在長時間恒定內壓和恒定溫度下的耐壓破壞時間或瞬時爆破的大壓力值，是各科研院所、質檢部門及管材生產廠家的檢測設備。根據管材的不同溫度 、壓力和環應力，在控制端上輸入不同的參數，高壓泵產生高壓液體，經過壓力控制系統，由高壓軟管輸送給介質恒溫箱內的試樣中，進行管材的長時間靜液壓試驗。此設備能夠充分體現企業的產品質量的水平。

1. Introduction:

The pipe hydrostatic testing machine is used to measure thermoplastic pipes, composite pipes (such as PP-R, PP-B, PP-A, PE, PE-X, PVC, PVC-U, PVC-C and aluminum-plastic composite pipes, etc.) Pipe) The pressure failure time under constant internal pressure and constant temperature for a long time or the maximum pressure value of instantaneous blasting is a necessary testing equipment for scientific research institutes, quality inspection departments and pipe manufacturers. According to the different temperature, pressure and ring stress of the pipe, different parameters are input on the control end. The high-pressure pump generates high-pressure liquid, which passes through the pressure control system and is delivered by the high-pressure hose to the sample in the medium constant temperature box for lengthening the pipe. Time hydrostatic test. This equipment can fully reflect the level of enterprise product quality.

二、符合標準：

產品符合GB/T6111、 GB/T15560、GB/T18742、GB/T13663、GB/T15558、GB/T18992、GB/T10002、ASTMD1598、ASTM D1599等標準要求。

Second, meet the standards

Products comply with GB/T6111, GB/T15560, GB/T18742, GB/T13663, GB/T15558, GB/T18992, GB/T10002, ASTM D1598, ASTM D1599 and other standards.

三、技術參數：

◆各路獨立控壓，壓力范圍：0 MPa -12MPa （任意設定）

◆壓力顯示精度：0.001MPa

◆控制精度：上限+2%、下限-1%

◆溫度控制范圍：(1) 15℃～95℃ (2） 室溫～95℃

◆溫度控制精度：±1℃

◆時間顯示范圍：0～10000h

◆試驗路 （工位） 數：12路 （也可根據客戶要求定做）

◆時間顯示精度：1秒

◆主機電源：三相四線AC380V50Hz，10A

◆恒溫箱電源：三相四線AC380V50Hz,電流根據水箱大小確定

◆加壓水源：純凈水

◆工作環境溫度：10-35℃

◆標配：16-120卡具、水箱、電腦 （可根據客戶要求配置不同的夾具和水箱）

Three, technical parameters

◆Independent pressure control for each channel, pressure range: 0 MPa -12MPa (arbitrarily set)

◆Pressure display accuracy: 0.001MPa

◆Control accuracy: upper limit +2%, lower limit -1%

◆Temperature control range: (1) 15℃～95℃ (2) Room temperature～95℃

◆Temperature control accuracy: ±1℃

◆Time display range: 0～10000h

◆Number of test roads (stations): 12 roads (also can be customized according to customer requirements)

◆Time display accuracy: 1 second

◆Host power supply: three-phase four-wire AC380V50Hz, 10A

◆Incubator power supply: three-phase four-wire AC380V50Hz, the current is determined according to the size of the water tank

◆Pressurized water source: pure water

◆Working environment temperature: 10-35℃

◆Standard configuration: 16-120 fixture, water tank, computer (different fixtures and water tanks can be configured according to customer requirements)