Specifications

Operation

Automatic electro-hydraulic

Power Source

85-264VAC, 50/60Hz, 1 phase

Molding Pressure

1200 - 4400psi [80 - 300bar] in 100psi [5bar] increments

Molding Temperature

120 - 360°F [50 - 80°C] in 20°F [10°C] increments

Heating Power

1500Watt @ 115/230VAC

Heating Time

0 - 20 minutes in 10 second increments

Cooling Time

0 - 30 minutes in 10 second increments

Mold Type

Cylindrical, including upper and lower rams and duplex mold spacer

Closure Type

Insluated bayonet with piston indent

Mold Diameters

1in, 1.25in, 1.5in, 2in, 25mm, 30mm, 40mm, 50mm

Touch-pad Controls

On/Off; Heat Time; Cool Time; Molding Temperature; Molding Pressure; Mold Size; Ram Up/Down; Maunal Cool; Cycle Start; Cylinder Open; Unit of Measure; Language and also including Thermoplastic; Load and Save Methods

Units of Measure

Imperial or Metric

Water Flow Rate

0.5gal/min [2?/min] minimum

Water Pressure

45-75psi [3-5bar]

Control Voltage

24VDC

Method Programmability

4 Buehler, Preprogrammed Methods per mold size; 25 User Definable Methods

Preload Pressure

0 - 400psi [0 - 30bar] in 50psi [5bar] increments

Thermoplastic Function

Automatically sets correct parameters for thermoplastic resins such as TransOptic™ and cools the mount in a controlled, linear fashion

Compliance

In accordance with EC Directives