三參數（水位，水溫和電導率）

三參數地下水自動記錄儀。荷蘭推出的CTD-Diver又一次提高了地下記

錄儀的標準。外殼采用*抗腐的陶瓷材料，極大地提高了產品的可靠性和長期工作的穩定性。內部三個傳感器同時測定水位、溫度和電導率，并存儲于儀器內存中，可隨時下載到計算機進行處理。CTD-Diver可以廣泛應用于排放監測，垃圾填埋處理監測，以及蓄水層貯存和土地恢復項目，鹽化項目，海水侵蝕項目等。

CTD-Diver

3 Parameters in 1 Housing

Where there is a need to monitor groundwater levels ａnd saltwater intrusion, injected wastewater, or contamination from chemical discharges and landfill sites, the CTD-Diver with its rugged, corrosion proof ceramic housing, is the instrument of choice.

The CTD-Diver is equipped with a four-electrode conductivity sensor that measures electrical conductivity from 0 to 120 mS/cm. There are two options for measuring conductivity: true or specific conductivity at 25 °C. Additionally, pressure and temperature are measured and recorded.

Features

Ø  Innovative ceramic housing technology

Ø  Three sensors in one sealed housing

Ø  Conductivity range up to 120 mS/cm

Ø  Compact size: Ø 22 mm - length 135 mm

Ø  Various measurement methods

Ø  48,000 records of time stamp, pressure, temperature and conductivity

Ø  30-Point pressure factory calibration

Ø  Benefits

Ø  Corrosion proof

Ø  Monitor conductivity, water levels, and temperature

Ø  Suitable for use at most sites

Ø  Easy installation in almost every well

Ø  Event based, averaging and pumping tests sample methods to conserve memory

Ø  Cost effective frequent, long-term measuring

Ø  Reliable and accurate data

Applications

Ø  Monitoring saltwater intrusion

Ø  Water quality monitoring for:

Ø  Agriculture

Ø  Remediation

Ø  Correlate conductivity with salt, TDS, permanganate, nitrate, sulfate

Ø  Tidal fluctuations monitoring

Ø  Estuary and wetlands monitoring

Ø  Leachate monitoring at landfill sites

Ø  Aquifer storage and recovery

Ø  Monitoring network automation

Ø  Groundwater monitoring projects

Ø  Mining:

Ø  Tailings

Ø  Environmental

Ø  Slope stability

Technical Specification

General

Pressure

Temperature

Conductivity