1.1 Overview

Thank you for purchasing our company's automatic industrial analyzer. In order to ensure the correct operation and maintenance of the instrument, please readthis manual in detail, which introduces the instrument's workflow, troubleshooting, and some operating skills and precautions. If you have any questions, please contact our technical support staff immediately and we will give you more detailed answers.

The automatic industrial analyzer is mainly used to determine the moisture, ash and volatile content of coal and other organic matter. Its main feature is that the entire test process is automatically completed by computer control, with short analysis time and high test accuracy. And the instrument has high reliability through the use of advanced acquisition and transmission data control system. The instrument has been well received by users and experts since it was put on the market, and has now become our company's leading product.

In order to enable relevant personnel to better grasp the use and maintenance of the instrument, we have compiled this manual for the automatic industrial analyzer, which gives a comprehensive introduction to how to use and maintain the instrument correctly.

1.2 Technical Parameters

1.2.1Power requirements

Tester host: voltage (220±22)V, frequency (50±1)Hz, current 20A, power 4.5kW

Computer: voltage (220±22)V, frequency (50±1)Hz, power 400W

Display: voltage (220±22)V, frequency (50±1)Hz, power

1.2.2Environmental requirements

Temperature: 10-35℃; Relative humidity: 35-85%; Atmospheric pressure: 86-106kPa

There is no strong vibration, dust, strong electromagnetic interference, corrosive gas around.

1.2.3 Number of crucibles

There are 24 volatiles and 24water ash, 24 samples can be tested at the same time.

1.2.4 Sample quality

Coal sample (0.9000-1.1000) g

1.2.5 Furnace temperature range

10—1000℃

1.2.6 Analysis accuracy

It is better than GB/T212-2007 "Industrial Analysis of Coal" standard requirements.

1.2.7 Dimensions

Volatile content: 605 (length) × 550 (width) × 800 (height) (mm)

Water gray part: 550 (length) × 585 (width) × 530 (height) (mm)

1.2.8Weight

Volatile part: About 60kg water cement part: About 50kg

1.3User-supplied items

Absorbent cotton (medical), standard sample, moisture crucible