◎ 型號含義 Type meaning

① 電壓調節(jié) Voltage regulation

② 負載電壓 0-240VAC , 0-380VAC Load voltage 0-240VAC,0-380VAC

③ 10A,25A,40A,60A,80A,100A,120A

④ F: 0-10VDC, G: 4-20mA, E:0-5VDC

◎ 產品概述 Product overview

◆ 額定電流：10A-120Amps

◆ 額定電壓：0-240VAC, 0-380VAC

◆ " 超低 " 的輸入電流

◆ 低輸出斷態(tài)漏電流

◆ 低輸出通態(tài)壓降

◆ 包含標準輸出的 R-C 緩沖器

◆ 控制方式全兼容，便于計算機連網調壓

◆ Rated current:10A-120Amps

◆ Rated voltage: 0-240VAC, 0-380VAC

◆ "Ultra low" input current

◆ Low output off-state leakage current

◆ Low output on-state voltage drop

◆ Standard output R-C buffer

◆ Fully compatible with different control methods, allowing the computer to easily adjust voltage through the network

注意 :

1. 當負載電流為 10A 時 , 必須加裝散熱器 ; 為 40A 及以上時 , 必須加風扇強冷或水冷 .

2. 使用感性負載時 , 務必在輸出端并接一個壓敏電阻 , 取值為負載電壓的 1.6-1.9 倍 .

Notice:

1. If the load current is 10A, a heat sink must be equipped; if the load current is 40A or more, an air-cooled radiator or a water-cooled radiator must be installed.

2. When the load is an inductive load, be sure to connect a varistor in parallel with the output terminal, whose voltage value is 1.6-1.9 times the load voltage.

◎ 安裝尺寸及接線圖 Installation dimensions and wiring diagram