CMP嵌入式金屬防爆堵頭（747系列）
CMP防爆格蘭代理商：上海頤品自動化科技有限公司
CMP嵌入式金屬防爆堵頭（747系列）
CMP嵌入式金屬防爆堵頭（747系列）
CMP嵌入式金屬防爆堵頭（747系列）
747 | Recessed Stopper Plug
747 | Recessed Stopper Plug
CMP防爆格蘭（CMP Cable Gland）
Hazardous Area Cable Glands-ATEX IECEX，Exe，Exd Group II
CMP防爆格蘭代理商：上海頤品自動化科技有限公司
關鍵詞：CMP防爆格蘭，CMP防爆變徑，CMP防爆堵頭，CMP防爆呼吸閥
CMP防爆格蘭等產品規(guī)格書及相關證書-請咨詢上海頤品自動化科技有限公司
Available in brass, nickel plated brass, aluminium, stainless steel & nylonRecessed Stopper Plug, Globally Approved, Explosive Atmosphere Cable / Conduit Accessory
• Provides means of blanking unused cable entries • Temporary or permanent • Tamper-proof (Type B) version available • General purpose / industrial version available • Nylon Ex e only version available (-20°C to +60°C) • -60°C to +200°C (metallic versions) • Globally marked, IECEx, ATEX, cCSAus & UL • For use with threaded entry holes only – for stopper plugs suitable for use in clearance/through holes, please see 757 or 767 • Nylon stopper 717 / 717e to be used for sizes M20, M25, M32, 1?2″, 3?4″ and 1″
Please note: 747 Stopper Plugs have passed IP66 compliance tests to IEC 60529 with no additional sealing. However CMP would recommend the addition of thread sealant or grease (such as Dow Corning No. 4 Silicone) in order to help maintain IP66 and keep water out of the enclosure in the long-term. The addition of thread sealant or grease is permitted as long as it is non-setting, non-metallic and non-combustible in compliance with IEC 60079-14.
| Description | Allen Key Recess | metallic | Non-metallic | |||
| Ex 'd' | Ex 'e' | Industrial | Ex 'e' | Industrial | ||
| 747 Recessed Non-Tamper Proof Type 'A' | Y | Y | Y | Y | Y | Y |
| 747 Recessed Tamper Proof Type 'B' | Y | Y | Y | Y | Y | Y |
| 757 Hexagon Head | N | Y | Y | Y | Y | Y |
| 757 Hexagon Head c/w 'O' ring seal | N | Y | Y | Y | Y | Y |
| 767 Dome Head | Y | Y | Y | Y | Y | Y |
| 767 Dome Head c/w 'O' ring seal | Y | Y | Y | Y | Y | Y |
| 717 Universal | Y | N | N | N | Y | Y |
HOW TO ORDER e.g. 747 – D – A – M – 3 – 1 = Dual Certified Ex d & Ex e- Type A – M25 – Aluminium
For Tamper-Proof Type B Stopper Plugs please substitute the letter A with the letter B in the ordering reference list below.
Other thread variations are available on request.
For further information on ordering please contact EPIN AUTOMATION.
PRODUCT SELECTION TABLE
| Ordering Reference | Thread Size | Minimum Thread Length | Allen Key Size A/F |
| 747DAM1 | M16 X 1.5 | 15.0 | M8 |
| 747DAM2 | M20 X 1.5 | 15.0 | M10 |
| 747DAM3 | M25 X 1.5 | 15.0 | M10 |
| 747DAM4 | M32 X 1.5 | 15.0 | M10 |
| 747DAM5 | M40 X 1.5 | 15.0 | M10 |
| 747DAM6 | M50 X 1.5 | 15.0 | M10 |
| 747DAM7 | M63 X 1.5 | 15.0 | M14 |
| 747DAM8 | M75 X 1.5 | 15.0 | M14 |
| 747DAM9 | M90 X 2.0 | 24.0 | M14 |
| 747DAM10 | M100 x 2.0 | 24.0 | M14 |
| Dimensions displayed in millimeters unless otherwise stated | |||
| If a nylon stopper is required for sizes M20, M25, M32, 1?2", 3?4" and 1" please order717 or 717e. | |||
昭平县|
安平县|
石河子市|
延吉市|
灵宝市|
卫辉市|
花垣县|
板桥市|
密云县|
沙坪坝区|
新化县|
邹平县|
衡东县|
凤阳县|
尉犁县|
塔城市|
旺苍县|
公主岭市|
常德市|
抚宁县|
湖南省|
新源县|
剑川县|
彭阳县|
永仁县|
福州市|
寿宁县|
崇礼县|
政和县|
五莲县|
桐庐县|
交城县|
阳原县|
雅江县|
东阿县|
方山县|
诸城市|
沙田区|
横山县|
辽阳市|
峨边|