Series 2230G 3通道可編程電源采用節省空間的 2U 高、半 機架寬機箱，為汽車電路、LED 驅動器、電源、功率 IC 和 其他高功率電路提供了 375W 的功率。2230G-30-3 有兩條 30V,3A 通道和一條 5V,3A 通道，提供了 195W 功率。2230G-30-6 和 2230-60-3 電源輸出高達 375W 的 功率。2230G-30-6 提供了兩條 30V,6A 通道，2230G60-3 則提供了兩條 60V,3A 通道。這兩種 375W 電源都 有一條 5V,3A 通道，作為第三條通道。這些電源都是線性 電源，因此都是低噪聲電源，對被測器件(DUT)的影響最 小。每條通道都有矩形輸出特點，可以在電壓時獲得全 部電流，因此 2230G-30-6可以為 6A 負載提供 30V 電壓， 2230G-60-3 可以為 3A 負載提供 60V 電壓。

主要特點:

• 一種 195W 型號、兩種 375W 型號可供選擇

• 195W 型號有兩條 30V,3A 通道和一條 5V,3A 通道

• 375W 型號有兩條 30V,6A 通道或兩條 60V,3A 通道和 一條 5V,3A 通道

• 所有通道都獨立控制并隔開，為各種測試設置供電

• 所有通道都有遠程傳感功能，可以為負載準確提供編程電壓

• 設置和監測輸出電壓，0.03% 基本準確度和 1mV 分辨率

• 監測負載電流，0.1% 基本準確度和 1mA 分辨率

• 低噪聲線性穩壓，<1mVrms 紋波和噪聲

• 多條通道串聯，輸出60V電壓；兩條或三條通道并聯， 輸出 15A 電流 (2230G-30-6)

• 同時顯示三條通道的電壓和電流輸出，立即觀測每種輸出 狀態

• USB、GPIB 和 RS-232 接口和后面板連接，方便地進行 自動測試

應用

• Series2230G 電源特別適合測試：

• 高功率模擬 ICs

• 汽車電路

• 電信設施電路

• LED 驅動器電路

隔離獨立輸出，提供的靈活性

Series2230G 高功率電源的每條輸出通 道都與其他通道獨立，電氣上與其他通 道隔開。因此，這些電源可以為光隔離 或變壓器相互隔開、擁有不同基準點的 電路供電。隔離通道不需要第二臺電源， 就可以為其中一條隔離電路供電。

Series 2230G 3-channel programmable power supply adopts space-saving 2U high and half-frame wide chassis, providing up to 375W power for automotive circuits, LED drivers, power supplies, power IC and other high-power circuits. The 2230g-30-3 has two 30V channels,3A channel and 5V channel,3A channel, providing 195W power. The power output of 2230g-30-6 and 2230-60-3 is up to 375W. The 2230g-30-6 provides two 30V and 6A channels, while the 2230g60-3 provides two 60V and 3A channels. Both of these 375W power supplies have a 5V,3A channel as the third channel. These sources are all linear sources, so they are all low noise sources and have the least impact on the DUT under test. Each channel has the characteristic of rectangular output, which can obtain the whole current at the maximum voltage, so 2230g-30-6 can provide 30V voltage for 6A load, and 2230g-60-3 can provide 60V voltage for 3A load.

Main features:

One 195W model and two 375W models are available

The 195W model has two 30V and 3A channels and one 5V and 3A channel

Model 375W has two 30V,6A channels or two 60V,3A channels and one 5V,3A channels

All channels are independently controlled and separated to power various test Settings

All channels have remote sensing capability to provide accurate programming voltage for the load

Set and monitor output voltage, 0.03% basic accuracy and 1mV resolution

Monitor the load current with 0.1% basic accuracy and 1mA resolution

Low noise linear regulator, <1mVrms ripple and noise

Multiple channels in series, output up to 60V voltage; Two or three channels in parallel, maximum output 15A current (2230g-30-6)

Display voltage and current output of three channels simultaneously, and immediately observe each output state

USB, GPIB and rs-232 interfaces are connected to the back panel for easy automated testing

application

Series2230G power is particularly suitable for testing:

High power analog ICs

Car circuit

Telecommunication circuit

LED driver circuit