主要特性

功率逆變器效率： 同時測量電力電子系統的交流輸出功率和直流輸入功率（使用可選的直流電流鉗）。

PowerWave 數據捕獲：可捕獲快速變化的 RMS 數據，顯示半周期和波形來描述電氣系統動態特性（發電機起動、UPS 切換等等。）

電能損失計算器：通過對標準的有功和無功功率測量、不平衡和諧波功率進行量化，以確定電能損失造成的財務成本。

實時故障排除：使用光標和縮放工具分析趨勢。

行業安全等級：在用戶引入線處采用 600 V CAT IV/1000 V CAT III 等級。

測量所有三相線和中性線：內置 4 個柔性電流探頭，增強的細柔性設計以適合最緊密的位置。

自動趨勢研究：每次測量都會自動記錄，無需進行任何設置。

系統監測器：根據 EN50160 電能質量標準，在一個屏幕上顯示 10 個電能質量參數。

記錄功能：可配置任何測試條件，可按用戶定義的間隔記錄最多 600 個參數。

查看圖表和生成報告：內置分析軟件。

電池續航時間：鋰離子電池組每次充電可運行 7 小時。

無線數據下載：將數據無線下載到 PC，并使用 Fluke Connect® 應用程序捕獲屏幕。

The main features

Power inverter efficiency: the ac output power and dc input power of a power electronic system are measured simultaneously (using an optional dc current clamp).

PowerWave data capture: captures rapidly changing RMS data, displaying half-cycle and waveform descriptions of electrical system dynamics (generator start, UPS switching, etc.).

Power loss calculator: the financial cost of power loss is determined by quantifying standard active and reactive power measurements, unbalanced and harmonic power.

Real-time troubleshooting: analyze trends using the cursor and zoom tools.

Highest safety level in the industry: 600 V CAT IV/1000 V CAT III level is adopted at the user lead-in line.

Measure all three phase lines and neutral lines: four flexible current probes are built in, with an enhanced thin flexible design for the tightest position.

Automatic trend study: each measurement will be recorded automatically without any setting.

System monitor: according to EN50160 power quality standard, 10 power quality parameters are displayed on one screen.

Recording function: any test conditions can be configured, and up to 600 parameters can be recorded at user-defined intervals.

View charts and generate reports: built-in analysis software.

Battery life: the lithium-ion battery pack can last up to seven hours on a single charge.

Wireless data download: download the wireless data to the PC, and use the Fluke Connect ® application capture screen.