8511系列拉壓力傳感器

• Features

  • 量程范圍小，從 0 ... 5 N 到 0 ... 2kN
  • 可測拉力和壓力
  • 部分型號精度可達0.1%F.S.
  • 材質鋁或不銹鋼
  • 小巧的外形設計
  • 安裝十分方便

• Product data

  型號	8511
  量程范圍	0 … 5 N 0 … 10 N 0 … 20 N 0 … 50 N 0 … 100 N 0 … 200 N 0 … 500 N 0 … 1000 N 0 … 2000 N
  受力方向	壓力和壓力
  標準化信號	可選配
  信號輸出	1 mV/V 1.5 mV/V 取決于量程范圍
  保護等級	IP54
  過載保護	No
  拉盤	No
  受力壓頭	No
  使用溫度范圍	-30 ... +90 °C
  具體特點	量程范圍小，從 0 ... 5 N 到 0 ... 2kN 可測拉力和壓力 部分型號精度可達0.1%F.S. 材質鋁或不銹鋼 小巧的外形設計 安裝十分方便

• Description

  Model 8511 bending beam load cells are designed for measuring tension and compression forces. Their high accuracy, low torque sensitivity and very low mounting height make these sensors particularly suitable for use in weighing and dosing technology as well as for laboratory and production use.
  
  Extremely simple force application makes the sensor easy to handle. It offers a very favorable price/performance ratio and can be used universally for static and dynamic measurements.
  
  Examples of application:
  
      Dosing system
      Load deflection curve
      Tension force measurement for wire or thread winders
      Friction forces
      Cable force
      Withdrawal force, etc
  
  The measuring element of this load cell consists of a double bending beam with strain gauges, the resistance of which changes with the application of force. Upon applying a voltage to the strain gauge bridge, the change in the strain gauge resistance is converted into output voltage, which is directly proportional to the force. The strain gauges and the entire measuring element are protected from water spray by rubber bellows.
  
  To install the load cell, it is securely clamped on the side with 2 bore holes. The tension or compression force to be measured is applied at the other end. Force is applied easily perpendicular to the sensor axis. This serves to prevent falsification of the measured values. The influence on the measuring signal resulting from the increase of load distance on the mounting side (e.g. by a touch finger) is negligible. Overload protection can be realized with little effort using a mechanical stop.

• Downloads

  Data sheet

  8511參數資料

  EN

  Operation manual

  8511使用手冊

  EN

Related products

8431,8432系列