適用范圍：
  XZ-1型真空泵是一種旋片式、油封單級機械真空泵。是用來對密封容器抽除氣體，以獲取真空的基本設備。該泵用于食品真空包裝；紡織工業上各松軟物品的真空壓縮；化工行業的真空干燥箱，蒸餾、濃縮；各類鑄件的真空浸漬處理；機械加工上的真空夾具；運輸作業中的真空裝卸；醫院手術室的真空吸引；橡塑工業的吸塑成型；真空動力試驗等也可以作為小型的油增壓泵、油擴散泵、分子泵等前級泵使用。

Scope：

XZ-1 Type vacuum pump is a kind of rotary chip type, oil seal single stage mechanical vacuum pump. Is used to remove gas from sealed containers in order to obtain a vacuum of the basic equipment. The pump is used in food vacuum packaging; vacuum compression of soft articles in the textile industry; vacuum drying boxes in the chemical industry, distillation, concentration; vacuum impregnation of various types of castings; vacuum fixtures for machining; vacuum loading and unloading in transport operations; Vacuum attraction in hospital operating theatres; and blister molding in the rubber and plastic industry Vacuum dynamic test can also be used as a small fuel booster pump, oil diffusion pump, molecular pump and other front pump.

結構特點：

XZ-1型 真空泵是有一個與傳動軸同心安裝而在泵體內處于偏心位置的轉子組成，轉子上有三個徑向滑動的葉片，將泵腔分隔成三個工作室，被抽氣體自吸氣體口進入，通過打開的逆止閥與過濾網進入泵室，當轉子旋轉時，完成吸氣的工作室自行與進氣口隔離并將氣體壓縮和通過泵室與排氣箱之間的通路將氣體排出。旋轉一周，重復三次操作。

該泵,具有體積小、重量輕、噪聲低、插上電源就能直接使用。操作安全簡便等優點。

Structural Features:

The XZ-1 vacuum pump is a rotor with a concentric mounting of the drive shaft and an eccentric position in the pump body, with three radial sliding blades on the rotor, separating the pump cavity into three studios, being pumped into the self-priming gas outlet, entering the pump chamber through an open counter-stop valve and a filter, and when the rotor rotates, The suction studio isolates itself from the inlet and compresses the gas and drains the gas through the path between the pump chamber and the exhaust tank. Rotate for a week and repeat the operation three times.
The pump, with small size, light weight, low noise, plugged into the power supply can be used directly. Safe and easy to operate and other advantages.

主要技術指標：Primary technical indexes:
  * 型          式  ：          Type      ：               XZ-1

* 抽氣速率  (L / S ) ：Air exhaust rate ：                1 (L / S )

* 極限壓力  ( Pa )   ： Limit pressure   ：             6X10-2

* 轉  速 （r /min）：Rate of rotation ：           1400 轉/分鐘

* 電機功率 （KW）：Generator motiton rate ：        0.12

* 電  源/ 電  壓：Power supply/voltage ： 單相220 V±10%  50HZ+2%

* 進氣口內徑(mm) ：Airtake bore：                       ￠15
* 外 形尺寸（mm）：Outline size  ：                320×165×220
* 凈重/毛重（Kg）：Net / Gross weight：               12 / 13