ABB彈簧電機1VCF339756S4918  ，原裝，全新，海外版。交直流通用： 電壓220-250V /110-127V，Motor for circuit-breaker springs charging M-MS-MAS aux voltage 110-130V 原裝，全新件。 

自動對合閘彈簧儲能的齒輪式電動機 (M)齒輪式電動機可自動對操作機構的合閘彈簧儲能；當斷路器合閘動作完畢，齒輪式電動機立即對合閘彈簧儲能。合閘彈簧亦可在維護時或無控制電源時手動儲能 (利用操作機構的杠桿)。同時，也可安裝一個限位開關及微動開關來監視合閘彈簧是否已儲能

彈簧儲能電動機特性：

電源 (Un) 24-30 V AC/DC

48-60 V AC/DC

100-130 V AC/DC

220-250 V AC/DC

運行條件85%...110% Un, 380...415 V AC/DC (CEI EN 60947-2 標準)

沖擊功率 (Ps) DC = 300 W (X1) / 500 W (E1-E6)

AC = 300 VA (X1) / 500 VA (E1-E6)

額定功率 (Pn) DC = 100 W (X1) / 200 W (E1-E6)

AC = 100 VA (X1) / 200 VA ( E1-E6)

沖擊時間0.2 s

儲能時間8-10 S (X1) / 4-5 S (E1-E6)

絕緣電壓2500 V 50 Hz (1 分鐘)

 1VCF309850S4913  CALOR EMAG  TYPE Y1 Ui250V Ith2  10A。
1VCF349899S0031 Socket with 58 female pins (AMPH socket) without wiring, for HD4, VD4 side version
1VCF379652S0101 Plug and socket with 58 female and male pins (AMPH plug and socket) without wiring, for HD4, VD4 side version
1VCF349799S0560 Plug with 58 male pins, C.E. type without wiring, for HD4, VD4, Vmax, VM1, VSC, Vcontact front version.NOTE: Special crimping, 1VCF309850S2913  extractor tools are needed and are not included.
1VCF349750S0483 Position switch Q60-FB1-FCM1 (NO) for circuit breaker's motor protection
1VCF349850S2913  for HD4, HD4/R (from SN: AC00002779)
1VCF599750S0163 Socket with 58 female pins, C.E. type without wiring, for Unigear, UniSec WBS-WBC, Univer C, Unisafe, PowerCube, CBE.NOTE:     Special crimping, extractor tools areneeded and are not included.
1VCF349799S0171 Motor limit switch S33M/1-BS1-BGS1 for HD4-VD4/R ESH
1VCF349750S0121 Manual device for closing spring charging for HD4-VD4/R ESH
1VCF339799S0426 Insulating tube, length 3mt., for plug connector of MV circuit breaker
1VCF349750S0407 Mechanical interlock with the door for HD4/W/P/US/Sec, VContact/W/P, VD4/P/W/PW/US/Sec, VM1/P/Z/W/AP/PW,     1VCF339799S0300  Vmax/L/W/Sec/P/PG/PN/PNG, VSC/P/PG/PN/PNG/S-PG/S-PNG
1VCF309550S0302 Position switch S75I-S75S-BT1-BT2-BGT1-BGT2 standard version, in the truck for VSC-SRC, VSC/P/PG/S-PG
1VCF309599S0051 Capacitor for VSC
1VCF309599S0031 Position switches of contactor set of 10 for VSC
1VCF309599S0082 Tulip-type contacts, D.35-16 fingers, set of 6 pieces for fuses BS type,for VSC/P 7-12kV
1VCF309599S0081 Tulip-type contacts, D.35-16 fingers, set of 6 pieces for fuses DIN type, for VSC/P 7-12kV
1VCF309503S0070 Manual truck of circuit breaker for VSC 7-12/P 400A without position switches and Electromechanical truck lock coil
1VCF309750S0201 Position switches BGB1-BGB2 of circuit-breaker operating mechanism (set of 14)for HD4 12-17kV 630-1250A 25kA series 5 from 2016    1VCF599750S0163except Marine and Gostversions.
1VCF309750S0221 Position switches BGB1-BGB2 of circuit-breaker operating mechanism (set of 20)for HD4 12-17kV 630-1250A 25-31,5kA series 5 from 1VCF309850S4913  2016 except Marine and Gost versions. 
1VCF349750S0334 Position switches of circuit-breaker operating mechanism (set of 10)for HD4 frontal version
1VCF349750S0335 Position switches of circuit-breaker operating mechanism (set of 15)with fig.9 for HD4 frontal version except Calor Emag version
1VCF349850S0159 Position switches of circuit-breaker operating mechanism (set of 15) without fig.9for HD4 frontal versions from s.n.AC00002779, 1VCF339799S0426 VD4/R/S/Uniair/Unimix with ESH.
1VCF349750S0395 Position switch S75C-BT3-BGT3 for HD4/W/P/SEC/GT_P/US, HM1/UT_W/UT_P froms.n. AC00002779, VD4/P-G/GT-P 12kV, VSC7-12/P/PG, Vmax/W/SEC, VD4/P/C/W/ PW/US/SEC/Z
1VCF349850S0161 Position switches of circuit-breaker operating mechanism (set of 5)for HD4/R-SEC only.
1VCF349850S0162 Position switches of circuit-breaker operating mechanism (set of 10)
1VCF349750S0201 Lever for manual closing spring charging for HD4 fixed version
1VCF349750S0211 Lever for manual closing spring charging and lever for racking in/out the circuitbreaker for HD4/NFSG
1VCF349750S0212 Lever for manual closing spring charging and lever for racking in/out the circuitbreaker for HD4/C/W/P/Z/GT_P/US
1VCF349750S0213 Lever for manual closing spring charging for HD4 side version
1VCF349750S0214 Lever for manual closing spring charging and lever for racking in/out the circuitbreaker for HD4/Z 40.5kV
1VCF349799S0501 Mechanical operation counter for HD4-VD4R ESH
1VCF349750S0371 Transient contact Q0-BB4-BGB4 for HD4 up to s.n. AC00002778
1VCF349750S0372 Transient contact Q0-BB4-BGB4 for HD4 from s.n. AC00002779
1VCF349750S1460 Position switch S75I-S75S-BT1-BT2-BGT1-BGT2 for circuit breaker with manual truck for HD4/W/E-W/P 12-17kV, 
1VCF329750S0913 
1VCF339799S0407 Support coils with diode bridge 
1VCF339799S0402 Transient contact BB4-S7-BGB4  
1VCF339799S0491 Lever for manual closing spring charging  
1VCF339799S0131 Lever for racking in/out the circuit breaker 
1VCF339799S0403 Position switches S1-BGS1 or S4-BGB2 goldened 
1VCF339799S0400Green close pushbutton “Push ON” and Red open pushbutton “Push OFF” 
1VCF339799S0401Red close pushbutton “Push ON” and Green open pushbutton “Push OFF”
1VCF339757S2902 Electromechanical locking release for truck   with rectifier, aux. voltage24Vdc for VD4G Classic
1VCF339757S2903 Electromechanical locking release for truck  with rectifier, aux. voltage30Vdc for VD4G Classic
1VCF339757S2904 Electromechanical locking release for truck  with rectifier, aux. voltag48Vdc for VD4G Classic
1VCF339757S2905 Electromechanical locking release for truck  with rectifier, aux. voltage60Vdc for VD4G Classic
1VCF339757S2909 Electromechanical locking release for truck with rectifier, aux. voltage100Vac, 110Vdc/ac for VD4G Classic
1VCF339757S2912 Electromechanical locking release for truck  with rectifier, aux. voltage125Vdc/ac for VD4G Classic
1VCF339757S2918 Electromechanical locking release for truck  with rectifier, aux. voltage220Vdc/ac for VD4G Classic
1VCF339757S2921 Electromechanical locking release for truck  with rectifier, aux. voltage 230Vac, 240Vdc/ac for VD4G Classic

1VCF349850S0902
1VCF349850S0903
1VCF349850S0904
1VCF349850S0905
1VCF349850S0913
1VCF349850S0922
1VCF859800S0009
1VCF859800S0132
1VCF859800S0131
1VCF859800S0130
1VCF859800S0128

1VCF339752S2909

1VCF349750S0902 Motor for circuit-breaker springs charging M-MS-MAS aux. voltage 24-30Vdc,24V50Hz

1VCF349750S0904 Motor for circuit-breaker springs charging M-MS-MAS aux. voltage 48-60Vdc/ac50Hz

1VCF349750S0909 Motor for circuit-breaker springs charging M-MS-MAS aux. voltage 110-132Vdc,110-127Vac

1VCF349750S0918 Motor for circuit-breaker springs charging M-MS-MAS aux. voltage 220Vdc

1VCF349750S0948 Motor for circuit-breaker springs charging M-MS-MAS aux. voltage 220-250Vac

1VCF339751R8909;

1VCF339751R8912;

1VCF339751R8939;

1VCF339751R8941;

1VCF339751R8943;

1VCF339701R8969;

1VCF339751R8969;

1VCF339751R8971;

1VCF339751R897

1VCF339751S8918 Motor for circuit-breaker springs charging M-MS-MAS aux. voltage 220-250Vac

1VCF339751S8948 Motor for circuit-breaker springs charging M-MS-MAS aux. voltage 220-250Vdc

1VCF339757S4902 Motor for circuit-breaker springs charging M-MS-MAS aux. voltage 110-130Vdc/ac

1VCF339757S4904 Motor for circuit-breaker springs charging M-MS-MAS aux. voltage 48-60Vdc

1VCF339757S4909 Motor for circuit-breaker springs charging M-MS-MAS aux. voltage 110-130Vdc/ac

1VCF339757S4948 Motor for circuit-breaker springs charging M-MS-MAS aux. voltage 220-250Vac

1VCF339757S4918 Motor for circuit-breaker springs charging M-MS-MAS aux. voltage 220-250Vdc

1VCF339850S0902 Motor for circuit-breaker springs charging M-MS-MAS aux. voltage 24-30Vdc

1VCF339850S0904 Motor for circuit-breaker springs charging M-MS-MAS aux. voltage 48-60Vdc

1VCF339850S0909 Motor for circuit-breaker springs charging M-MS-MAS aux. voltage 110-130Vdc/ac

1VCF339850S0918 Motor for circuit-breaker springs charging M-MS-MAS aux. voltage 220-250Vdc

1VCF339850S0948 Motor for circuit-breaker springs charging M-MS-MAS aux. voltage 220-250Vac

ABB彈簧電機1VCF339756S4918

操作機構是屬于儲能型的，也就是用預先儲能的彈簧操作。

彈簧儲能可以手動操作前面盤的手柄或利用齒輪式電動機電動操作。

分閘彈簧在合閘 (closing) 操作時自動儲能。

通過安裝在操作機構內部的合閘及分閘線圈，以及使用齒輪式電動機對彈簧儲能，斷路器可以實現遙控操作，如需要，還可與監控系統配合。