冬斯-循環調節器
- 輸入壓力高達 150 mbar (15 kPa)
- 高流量
- 調節器輸入壓力(響應壓力)的穩定、精確和靈敏調節
- 入口壓力補償膜片
- 安全膜片
- 標準外部脈沖 - Rp 1/2 - Rp 2 螺紋連接
- DN 40
- DN 100 法蘭連接
當消耗量波動時,DUNGS 壓力調節器(FRU 型)將增壓器的輸出壓力限制在設定值(響應壓力)。它不含任何有色金屬,適用于至大氣體。0.1 vol.% H2 S,干燥。適用于1、2、3族氣體及其他中性氣體介質。
| Specifications | ||
| Nominal diameters Pipe thread as per ISO 7/1 Flange | DN | 40 50 65 80 100 |
| Rp | 1/2 3/4 1 11/2 2 | |
| Connection flange (PN 16) as per DIN EN 1092-1 | ||
| Max. operating pressure | up to 500 mbar (50 kPa) | |
| Pressure regulator | Pressure regulator as per EN 88-1, Class A, Group 2 | |
| Input pressure range | up to 150 mbar (15 kPa) | |
| Response pressure range | 5 mbar (0.5 kPa) to 150 mbar (15 kPa) as a factor of adjustable setpoint spring | |
| Materials of gas-conveying parts | Housing: | aluminium, steel |
| Seals and diaphragms: | NBR | |
| Ambient temperature | -15 ° C to +70 ° C | |
| Installation position | Regulator dome from vertically upright to lying horizontally | |
| Measuring/ignition gas connections | G 1/4 ISO 228 on both sides in inlet section | |
| Pulse connection | External, prepared for connection of response pressure | |
| Blow-off line | Blow-off line need not be routed, safety diaphragms are installed | |
| Spring selection | The desired response pressure is provided by the force of the installed adjustable spring. The pressure regulator is equipped with a blue spring (No. 4) as standard. If other pressure ranges need to be covered, select the spring required as specified in the table below. | |




































麻阳|
聂拉木县|
文山县|
会泽县|
娄底市|
中方县|
丽水市|
旬邑县|
鱼台县|
夏津县|
榆林市|
故城县|
罗甸县|
渭源县|
峨边|
娄烦县|
溆浦县|
离岛区|
阿拉善左旗|
桂东县|
彭州市|
玉田县|
伊通|
连南|
宁化县|
万州区|
安塞县|
托里县|
元江|
全南县|
仲巴县|
林芝县|
兴化市|
吕梁市|
凌海市|
台南市|
彰武县|
罗甸县|
长沙县|
老河口市|
崇义县|