PLD108A型油品體積電阻率介質損耗測定儀　　
特點：
1. 高度自動化，升溫、測量介損 、測量電阻率可一次完成；
2. 油杯采用符合國標GB/T5654-2007的三電極式結構，極間間距2mm，可消除雜散電容及瀉漏對介損測試結果的影響；
3、儀器采用中頻感應加熱，PID控溫算法。該加熱方式具備油杯與加熱體非接觸、加熱均勻、速度快、控制方便等優點，使溫度嚴格控制在預設溫度誤差范圍以內。
4、采用的DSP和FFT技術，確保數據穩定、準確、可靠。
5、內部標準電容器為SF6 充氣三點極式電容，該電容的介損及電容量不受環境溫度、濕度等影響，使儀器精度在長時間使用后仍然得到保證。
6、大屏幕彩色觸摸屏，中文操作菜單，人家對話方便，操作簡潔明了，一目了然。
7、具有開蓋斷高壓，油杯高低壓電極短路等溫馨提示，消除安全隱患，確保操作人員的人身安全和設備的正常運行。
8、自帶實時時鐘，測試日期、時間可隨測試結果保存、顯示、打??；設備可以顯示環境實時監測。
9、自動存儲測量數據，可存儲100組測量數據。
10. 空電極杯校準功能。測量空電極杯的電容量和介質損耗因數，以判斷空電極杯的清洗和裝配狀況。校準數據自動保存，以利于相對電容率和直流電阻率的精確計算。

技術指標：
測量范圍： 電容5pF～200pF；介損 0.00001～100；電阻率2.5MΩm～20TΩm　
分辨率：電容0.01pF；介損10-5；電阻率 0.001M
測量精度：電容0.5%+1PF；介損±(1%讀數+0.0001)；電阻率±10%讀數 控溫精度：±0.5℃
控溫范圍：0～125℃
交流電壓： AC 0-2000V
直流電壓： DC 0-500V
環境溫度： 0～40℃
環境濕度： ＜80%RH
工作電源： AC220V±10% (50±1)Hz
外形尺寸： 420mm*380mm*385mm
功　 率： 100 W
重　 量： 21Kg（不含油杯）

PLD108A type oil volume resistivity Dielectric Loss Tester
Characteristic：
1. highly automated, heating, measuring dielectric loss and measuring resistivity can be completed at one time.
2. the oil cup adopts the three electrode structure conforming to the national standard GB/T5654-2007, and the interelectrode spacing 2mm can eliminate the influence of stray capacitance and leakage on dielectric loss test results.
3, the instrument uses intermediate frequency induction heating, PID temperature control algorithm. The heating method has the advantages of non contact with oil cup and heating body, uniform heating, fast speed, convenient control and so on, so that the temperature is strictly controlled within the range of the preset temperature error.
4, adopt advanced DSP and FFT technology to ensure data stability, accuracy and reliability.
5, the internal standard capacitor is SF6 inflated three point polar capacitance. The dielectric loss and capacitance of the capacitor are not affected by the ambient temperature and humidity, so that the precision of the instrument is still guaranteed for a long time.
6, large screen color touch screen, Chinese operation menu, convenient dialogue, simple operation, clear at a glance.
7, with the opening and breaking of high pressure, oil cup high and low voltage electrode short circuit and other warm hints to eliminate security risks, to ensure the safety of the operator and the normal operation of the equipment.
8, with a real-time clock, the test date and time can be saved, displayed and printed with the test results. The device can display real-time monitoring of the environment.
9, automatic storage of measurement data, can store 100 sets of measurement data.
10. empty electrode cup calibration function. The capacitance and dielectric loss factor of the empty electrode cup are measured to judge the cleaning and assembly status of the empty electrode cup. The calibration data is automatically saved to facilitate accurate calculation of relative permittivity and DC resistivity.

Technical indicators:
Measurement range: capacitance 5pF to 200pF; dielectric loss 0.00001 to 100; resistivity 2.5M 2.5M m ~ 20T ohm M
Resolution: capacitance 0.01pF; dielectric loss 10-5; resistivity 0.001M
Measurement accuracy: capacitance 0.5%+1PF; dielectric loss + (1% reading +0.0001); resistivity + 10% reading temperature control accuracy: + 0.5 C
Temperature control range: 0~125 degrees centigrade
AC voltage: AC 0-2000V
DC voltage: DC 0-500V
Ambient temperature: 0~40 degrees centigrade
Environmental humidity: <>
Working power: AC220V + 10% (50 + 1) Hz
Shape size: 420mm*380mm*385mm
Power: 100 W
Weight: 21Kg (without oil cup)