德國奧萊斯OLES進口德標止回閥

【進口德標止回閥】詳細說明：

止回閥是指依靠介質本身流動而自動開、閉閥瓣，用來防止介質倒流的閥門，又稱逆止閥、單向閥、逆流閥和背壓閥。止回閥屬于一種自動閥門，其主要作用是防止介質倒流、防止泵及驅動電動機反轉，以及容器介質的泄放。止回閥還可用于給其中的壓力可能升至超過系統壓的輔助系統提供補給的管路上。止回閥主要可分為旋啟式止回閥（依重心旋轉）與升降式止回閥（沿軸線移動）。

止回閥這種類型的閥門的作用是只允許介質向一個方向流動，而且阻止反方向流動。通常這種閥門是自動工作的，在一個方向流動的流體壓力作用下，閥瓣打開；流體反方向流動時，由流體壓力和閥瓣的自重合閥瓣作用于閥座，從而切斷流動。

可廣泛用于自來水、污水、建筑、石油、化工、食品、醫藥、輕紡、電力、船舶、冶金、能源系統等體管線上。

Check valve refers to the valve that automatically opens and closes the disc depending on the flow of the medium itself to prevent medium backflow, also known as check valve, one-way valve, counterflow valve and back pressure valve. Check valve is an automatic valve. Its main function is to prevent medium backflow, reverse pump and drive motor, and release of container medium. Check valves can also be used in pipelines to supply auxiliary systems where pressure may rise above system pressure. Check valves can be divided into swing check valves (rotating according to the center of gravity) and lift check valves (moving along the axis).

Check valves of this type are designed to allow media to flow in only one direction and prevent reverse flow. Usually, the valve operates automatically, and the disc opens under the action of a fluid pressure flowing in one direction. When the fluid flows in the opposite direction, the disc acts on the seat by the fluid pressure and the self-coincidence disc of the disc, thus cutting off the flow.

It can be widely used in water, sewage, construction, petroleum, chemical industry, food, medicine, textile, power, ship, metallurgy, energy system and other body pipelines.

【進口德標止回閥】性能情況

1. 閥瓣關閉快速，水錘壓力小    

4、水平或垂直管道均可使用，安裝方便    

5、流道通暢、流體阻力小    

6、動作靈敏、密封性能好   

7、閥瓣行程短、關閥沖擊力小  

8、整體結構、簡單緊湊、造型美觀  

9、使用壽命長、可靠性高

【進口德標止回閥】優勢：

關閉扭力小，密封性好，密封面間磨擦力小，壽命較長

精鑄閥體，閥體采用精密鑄造

外表經過二次拋丸處理，外觀細膩

閥瓣采取全數控加工

閥瓣限位裝置，防止閥瓣打開位置過高而無法關閉。

實心銷軸安裝精確，強度高，保證了閥門的使用性能和使用壽命

搖桿具有足夠的強度，關閉時有足夠的自由度以利于閥瓣關閉。

閥瓣具有足夠的強度和剛度，閥瓣密封面可根據用戶要求堆焊金屬材料或鑲嵌非金屬材料。