德國奧萊斯OLES進口鍛造止回閥

【進口鍛造止回閥】詳細說明：

升降式止回閥的閥瓣座落位于閥體上閥座密封面上。此閥門除了閥瓣可以自由地升降之外，其余部分如同截止閥一樣，流體壓力使閥瓣從閥座密封面上抬起，介質回流導致閥瓣回落到閥座上，并切斷流動。根據使用條件，閥瓣可以是全金屬結構，也可以是在閥瓣架上鑲嵌橡膠墊或橡膠環的形式。像截止閥一樣，流體通過升降式止回閥的通道也是狹窄的，因此通過升降式止回閥的壓力降比旋啟式止回閥大些，而且旋啟式止回閥的流量受到的限制很少。

The disc of the lift check valve is located on the sealing surface of the seat on the valve body. In addition to the valve disc can rise and fall freely, the rest of the valve is like a globe valve. The fluid pressure causes the disc to rise from the seating surface, and the medium reflux causes the disc to fall back to the seat and cut off the flow. According to service conditions, the disc can be all-metal structure, or it can be in the form of rubber pads or rubber rings embedded on the disc rack. Like globe valves, the passage through which fluid passes through the lift check valve is narrow, so the pressure drop through the lift check valve is larger than that through the swing check valve, and the flow of the swing check valve is limited very little.

【進口鍛造止回閥】特點：

1、閥體閥裝蓋采用自緊密封設計，壓力越高，密封性能越好；

2、全鍛造啟閉件，性能可靠，承壓穩定，無泄漏；

3、新材料C12A,F91等應用提高了產品的高溫性能及可靠性；

4、閥體流道設計，顯著降低閥門流阻系數。提高通流能力，達到提高機組效率。節能減排的效果

5、閥門適用于主蒸汽，主給水，過熱，再熱器疏放水，對空排汽等作啟閉隔離用。

【進口鍛造止回閥】特性：

1、閥門采用模鍛工藝、結構緊湊、造型美觀、縮徑流道。閥體閥蓋采用明桿支架螺栓連接；

2、密封面可根據使用的工況選擇Cr13不銹鋼、STL硬質合金。填料可選擇柔性石墨或者PTFE；

3、閥瓣為圓錐形，閥桿設有倒密封，密封性好。閥桿表面經氮化處理，具有良好的抗腐蝕性、抗摩擦性；

4、可選用各種配管標準及連接形式（如：承插焊、對焊、螺紋連接）。