SNH280R46U8W2三螺桿泵 E6.7系列SNH螺桿泵
SNH three screw pump,three screw pump spot, three screw pump parameters,three screw sizes, three screw structure , three screw pump selection, three screw pump manufacturers, three screw pump, triple screw supply, three screw pump prices, three screw type, how much of a three screw Huangshan Tianman Pump Co., Ltd., three screw pump Dealers, three screw pumprepair
Application
For handling lubricating fluids. The fluids to be pumped must not contain any abrasive substances nor chemically attack the pump materials.
Main fields of application
Fuel oil firing/energy engneering:
For handling light and heavy fuel oils as well as residual and waste oils, e.g. as fuel oil, transfer, fuelling, ring-conduit and burner-operation pumps.
Hydraulics:
For booster and/or pumping hydraulic oils on mineral-oil basis or hydraulic lubricating liquids; e.g. as hydraulic presses, forging hammers, bale presses, chip-board presses, winches, hoists, variable-pitch propeller and rudder adjusting units, hatch hydraulics, rolling mill and machine tool hydraulics,
General industrial engineering/machine/heavy machine industry:
For handling lubricating, cooling, coolant, sealing, regulating and hydraulic oils, light and heavy fuel oils, diesel oils. fuels and thermal oils（cold）;e.g. for steem, gas and water turbines as lubricating, sealing, regulating oil and jacking oil pumps, for compressors as lubricating, sealing and coolant oil pumps, for gear drives as lube-oil pumps, for diesel engines as lubricating and cooling oil as well as fuel pumps, for rolling mills as lube-oil and hydraulic pumps etc.
Marine/Offshore engineering:
For handling lubricating, cooling and hydraulic oils, light and heavy fuel oils, crude oils as well as fuels.
Machine-tool industry:
For handling cutting, grinding, deep-hole drilling oils and oil-in-water emulsions as well as hydraulic oils.
Tank farms:
For handling all lubricating fluids such as greases, oils, paints, fuels, polyols, isocyanates; e.g. as loading or unloading pumps.
Printing industry:
For handling gravure inks.
Chemical and petro-chemical as well as processing industry:
For handling all lubricating fluids such as oils（including crude oils）,
greases, paint, lacquers, ointments ,pastes, polyols, isocyanates, tar,
bitumen, glycerin, glues, adhesive substances, resins, paraffins, waxes,
water glass and also as pipeline pumps.
Paint/lacquer industry:
For handling paints, lacquers, resins, oil varnish and linseed oils.
Washing/cleansing agent industry:
For handling oils, greases, soaps and additives.
Paper/puld industry:
For handling viscose and pulp.
Food industry:
For handling molasses, glucose, sirup and vegetable oils.
Design：
Self-priming three-screw pump.
The hardened and ground spindles run in a replaceable casting insert.
The axial thrust acting on the flanks of the screw threads is compensated by balance
pistons which-with all three spindles are arranged in the delivery chamber.
The idler spindles are turned hydraulically. The thread flanks merely transmit the
torque resulting from the liquid friction and are consequently practically free of stress and not subject to any wear.
A groove ball bearing lubricated by the fluid to be pumped（with internal bearing design）
respectively ab external, grease lubricated groove ball bearing serves for fixing the driving spindle.
A stuffing box or two shaft sealing rings or a maintenance-free unbalanced mechanical seal
as required is used as shaft sealing. By means of a return pipe, the sealing chamber is
connected with the suction chamber. Therefore, irrespectively of the delivery pressure,
only the suction/inlet pressure always becomes effective at the shaft sealing.
Function:
Owing to a special profiling of the flanks of the screw threads, the three spindles form
sealed chambers, the contents of which are axially and compley continuously shifted from
the suction to the delivery side of the pump. There is no turbulence despite the rotational
movement, and squeezing stresses are avoided by the constant volume in the chambers.
Noise/pulsation:
The structural design and mode of operation of the screw pump ensure a very low noise level
and a nearly pulsation-free delivery.
Performance data:
A preliminary pump selection can be effected by means of the performance tables. For the
exact performance data as function of the viscosity of the fluid to be pumped and the pump speed,
please refer to the individual characteristics.
Speed of rotation:
Based on the small dimensions of the rotating screw spindles and according to pump size and
design rotational speeds up to
SNH280R46U8W2三螺桿泵 E6.7系列SNH螺桿泵
SNH三螺桿泵，SNF三螺桿泵，SNS三螺桿泵，SNE三螺桿泵，點火油泵，高壓油泵，燃油噴射泵，三螺桿泵現貨，三螺桿泵參數，三螺桿泵尺寸，三螺桿泵結構圖，三螺桿泵選型，三螺桿泵廠家，三螺桿泵組，三螺桿泵供應，三螺桿泵價格，三螺桿泵型號，三螺桿泵多少錢一臺，黃山天曼泵業有限公司，三螺桿泵供銷商，三螺桿泵維修
新野县|
伊通|
亳州市|
和平县|
津市市|
兴城市|
孟州市|
易门县|
抚顺县|
洛南县|
无为县|
平泉县|
同仁县|
嘉禾县|
桑植县|
黔西|
天镇县|
徐闻县|
冕宁县|
亳州市|
高淳县|
舞钢市|
宣城市|
眉山市|
弥勒县|
安溪县|
河曲县|
甘谷县|
宁德市|
万山特区|
云和县|
安龙县|
青阳县|
平山县|
那曲县|
株洲县|
永吉县|
杭锦旗|
湘潭县|
商南县|
柳林县|