Specifications:
Conductive polymers using advanced technologies to provide a durable and efficient function of the electrostatic dissipation, which can effectively eliminate static electricity build-up, the release of the surface static electricity, reducing the function caused by electrostatic discharge failure, scrap and dust accumulation, maintaining clean, bright look.
Performance:
Surface resistance :105-108 ohm volume resistance :105-108 Ohm
Static decay: <0.3 seconds from power voltage: <70 V
Solid content: 20 ± 0.5% PH value :8.0-9.0
Applicable standards:
Static control requirements apply to the microelectronics, ecommunications, electronic control, medical and other ground anti-static treatment.
Comply with national standards and industry standards SJ/T11159-1998, GB/T14437-97, IEC61340-5-1, SJ/T10694-1996.
Usage:
Remove the original wax layer, dry cleaning, wax with a clean drag the product evenly on the floor, so 30-60 minutes until the wax layer compley dry, then smear the second layer of wax as neede water against the anti-static floor wax, coated surface dragd can be coated 3 - 5 layer of wax.
Abrasion polishing: 5 parts water can be used against an anti-static floor wax copies, high speed polishing.
Regular meeting of wax: Available 1 1 of
Notes:
Read the product description carefully before use:
In a well-ventilated environments, such as accidentally splashed into eyes, the washing with water, if not, go to hospital.
Do not use the leftover wax back into the original container, the container sealed when not in use to avoid the reach of children. Save more than 0 ℃.