Imported low temperature filter Imported low temperature filter, using bolted bonnet, socket welding and end docking, available. The bolted bonnet is easier to service, especially in tight spaces, and requires only a small amount of torque to remove the bolt. All valves are assembled in a dust-free environment and are degreased. They can be used for oxygen and are pressure tested before leaving the factory. Product Features ■ The size of the opening of the filter is three times that of the main road, which effectively reduces the flow resistance. ■ High-strength stainless steel strainer prevents water from impact and deformation. ■ The valve body is equipped with a machined seat and a threaded seat in the bonnet for precise alignment of the filter. ■ The filter is equipped with a special flared opening on the upstream port. The unique structure allows the fluid to pass through the filter without being obstructed. ■ Optional quick drain switch for easy cleaning of dirt. Technical Parameters Specification range: DN6-DN300 Temperature range: -196 ° C ≈ 150 ° C Connection method: flange or welding Applicable medium: LNG liquefied natural gas, LNG liquefied natural gas, liquid argon, LNG liquefied natural gas, liquid air, liquefied natural gas, LO2, LN2, LAR, LNG, etc. Applications: Ethylene, LNG plant, natural gas LPG LNG storage tank, receiving base and satellite station, air separation plant, petrochemical tail gas separation equipment, LNG liquefied natural gas, LNG liquefied natural gas, liquid argon, carbon dioxide cryogenic storage tank and tank truck, Pressure swing adsorption oxygen generator Different filter sizes: 80-200 mesh (standard mesh is 100 mesh) material Valve body ASTEM A351 CF8M Bonnet ASTM A276 316 Bonnet seal SIGMA 511 Bonnet flange ASTEM A351 CF8M Fastener BS6105 A4 Gr. 80 Filter element Origin: United States Product brand: US Euroco (OKE)