A. Overview
Theface mask synthetic blood penetrability tester is used to determine theresistance of medical protective masks to the penetration of synthetic bloodunder different test pressures.
B. Testing Principles:
Spraya certain amount of synthetic blood on the one side of the mask in a horizontaldirection at a certain pressure and distance, and observe the penetration ofsynthetic blood on the other side of the mask.
C. Applicable Standards:
GB/T19083-2010:Technical requirements for protective face mask for medical use
YY0469-2011:Surgical mask
YY/T0691-2008: Clothing for protection against infectious agents - medical facemasks - test method for resistance against penetration by synthetic blood
D. Technical Parameters
1. SprayDistance: 300mm~305mm adjustable
2. NozzleDiameter: 0.84mm
3. SpraySpeed: 450cm/s, 550cm/s, 635cm/s
4. SprayPressure: 10.6 kPa (80 mmHg), 16 kPa (120 mmHg), 21.3 kPa (160 mmHg)
5. PowerSupply: 220V 50Hz
6. AmbientTemperature: 10-35℃
7. RelativeHumidity: 20—90%RH (nice ventilation conditions are required)
8. AirPressure: 0.6MPA
E. Features:
1. Theconvex fixture can simulate the actual use condition of the face mask, leavinga test target area for spraying synthetic blood without destroying the sample.
2. Thespecialized constant pressure spray device can spray a certain volume ofsynthetic blood in a given time.
3. Itcan fully simulate the spray speed corresponding to the average blood pressureof the human body 10.6kPa, 16kPa, and 21.3kPa for testing.
4. Thetester is equipped with a fixed target plate, which can block the high-pressureedge part of the sprayed flow that increases the accuracy and repeatability ofthe liquid sprayed on the sample.
F. Components:
1. Airpressure control system (1 Set)
2. Facemask installation fixture (1 Set)
3. SplashProof glass cover (1 Set)
會(huì)員1.png)
清流县|
徐水县|
雷波县|
剑阁县|
铜山县|
德阳市|
张家川|
孙吴县|
岳池县|
若羌县|
任丘市|
普陀区|
吴桥县|
府谷县|
乳源|
弋阳县|
渝中区|
房产|
石楼县|
阜宁县|
冀州市|
阿尔山市|
泽州县|
镇安县|
黔江区|
东乌珠穆沁旗|
黑水县|
府谷县|
青州市|
平乡县|
通道|
诏安县|
榕江县|
公安县|
枞阳县|
阳原县|
无锡市|
增城市|
霍州市|
安宁市|
南郑县|