<nav id="tr8ss"><li id="tr8ss"></li></nav><th id="tr8ss"><li id="tr8ss"></li></th>

當前位置：南京萬達儀表>>>>電阻遠傳壓力表

電阻遠傳壓力表

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號YJTZ

品牌

廠商性質經銷商

所在地

在線詢價收藏產品

聯系方式：葛玉查看聯系方式

更新時間：2017-07-25 16:27:52瀏覽次數：769次

聯系我時，請告知來自儀表網

產品分類 品牌分類

  壓力表

儀表
  溫度儀表

熱電偶

暫無信息

南京萬達儀表

經營模式：經銷商

商鋪產品：283條

所在地區：江蘇

聯系人：葛玉（經理）

詢價 給他留言

產品簡介

簡介遠傳壓力表適用于測量對鋼及銅合金不起腐蝕作用的流體，氣體和蒸汽的壓力。電阻信號輸出傳至二次儀表上，可以實現現場就地指示壓力以便于現場工藝檢查，還可以實現遠距離集中控制和調節。

詳細介紹

電阻遠傳壓力表

發布時間：2008-1-29 閱讀次數：107

YJTZ型電阻遠傳壓力表
YJTZ Series Resistance Remote Transmitting Pressure Meter

簡介

遠傳壓力表適用于測量對鋼及銅合金不起腐蝕作用的流體，氣體和蒸汽的壓力。電阻信號輸出傳至二次儀表上，可以實現現場就地指示壓力以便于現場工藝檢查，還可以實現遠距離集中控制和調節。

不銹鋼的導壓系統及外殼均采用了不銹鋼材料，有較強的耐腐蝕性能，適用于對耐蝕性能有較高要求的場合。

在不銹鋼內充灌阻尼液及加裝緩沖裝置，成為不銹鋼耐震。適用于工作環境有較強震動的場合。

Brief Introduction:

The remote transmitting pressure meter is applicable to measure pressure of such liquids, gases or vapors that have no erosive attack on steel or copper alloy. Its resistance signal may be output to the secondary instrument, so as to realize local pressure indicating at fieldfacilitate field technological testing, even to realize concentrated remote controladjustment.

The pressure conducting systemits outer housing for stainless steel resistance remote transmitting pressure meter is made of stainless steel, with stronger capacity of corrosion resistance,applicable to such occasions with higher requirements for capacity of corrosion resistance.

To fill damping liquidadd shock reducer in stainless steel resistance remote transmitting pressure meter, the stainless steel shock resistance resistance remote transmitting pressure meter is constructed, applicable to occasion with stronger vibration in working environment.

主要技術參數

精確度：1.6級
發送器起始電阻值：3～20Ω
發送器滿度電阻：340Ω～400Ω
發送器接線端①③外加電壓不大于6V
使用環境條件：-40～+60℃，相對濕度不大于85%，且震動和被測介質的急劇脈動應對儀表正常工作無明顯影響。
溫度影響：使用溫度偏離20±5℃時，其溫度附加誤差不大于0.4%/10℃。

Principal technical parameters

Accuracy: 1.6 grades
Initial resistance value of transmitter: 3～20Ω
Full scale resistance value of transmitter: 340Ω～400Ω
Impressed voltage between terminals ①②: not greater than 6V
Environmental condition in use: -40～+60oC, with relative humidity not greater than 85%no vibrationpulse of tested medium greater enough to make obvious be impacted on the instrument from normal working.
Temperature affect: in case that the temperature in use 20±5℃ offset, the additional error shall be less than 0.4%/10℃.

構成示意圖 Internal structure

型號表示 Model designations

標記示例：YJTZN-150B

不銹鋼電阻遠傳耐震壓力表?！峨娮枋竭h(yuǎn)傳壓力系列儀表選型指南》。

Marking instance：YTZN-150B ：

Stainless steel resistance remote transmitting pressure meter. Product computer coding, please see the“Guide for type selection

of resistance remote transmitting pressure series meters.”

型號規格 Typesspecifications

結構原理

本儀表由一個彈簧管壓力表（為一次儀表）和一個滑線電阻式發送器等組成。

一次儀表的作用原理與一般彈簧管壓力表相同。由于電阻發送器系設置在齒輪傳動機構上，因此當齒輪傳動機構中的扇形齒輪軸產生偏轉時，電阻發送器的轉臂（電刷）也相應的地偏轉。由于電刷在電阻器上滑行，使得被測壓力值的變化變換為電阻值的變化，傳到二次儀表上指示出與一次儀表相應的壓力值。

Structureprinciple:

This instrument comprises of a pressure meter, a slide resistance transmitter,so on.

The mechanical part of this instrument plays same role with normal pressure meter. Because the resistance transmitter is built in the tooth gear, when deflexion occurs on the axle of the segment gear, the rocking arm (electric brush) of the resistance transmitter deflects accordingly. Due to the slide of electric brush on the resistor, changes of the tested pressure value are transformed into changes of resistance value, which is transmitted to secondary instrument. Corresponding value is displayed accordingly. Meanwhile, primary instrument will also indicate corresponding value.

外形尺寸 External dimension

電阻式遠傳壓力表配置XCZ-104型二次儀表接線方法 Resistance remote transmitting pressure

meter if configured with XCZ-104 type secondary instrument wiring method.

與其他數顯二次儀表配接時，請按二次儀表說明書的接線圖配接。

For connection with other digital-displaying secondary instrument, please follow the wiring drawing in the instruction book

for secondary instrument.

訂貨須知 Ordering instructions

訂貨時須注明：型號、名稱、精確度、測量范圍。如特殊要求，請注明技術要求。

Ordering instructions: types, names, accuracy grades,measuring ranges .must be clearly noted. In case of special requirements, technical requirements shall be clearly noted specifications on the back of the order on ordering goods.

關鍵詞：遠傳壓力表儀表耐震壓力表彈簧管壓力表

其他推薦產品更多>>