德國進口奧瑪品牌 進口高溫高壓電站閘閥安裝在水,汽管道上作為啟閉裝置用。
結構簡述:
1、高溫高壓電站閘閥采用壓力自緊式密封結構，彈性閘板，兩端支管為焊接連。
2、閥座密封面采用鈷基硬質合金等離子噴焊而成，耐磨、抗擦傷性能好。
閥瓣密封面經硬化氮化處理。
3、閥桿表面經抗蝕性氮化處理，有良好的抗腐蝕和抗擦傷性。
4、高溫高壓電站閘閥的開啟和關閉由電動裝置來控制，電動裝置分別配有專用電機，減速器、轉矩控制機構、現場操作機構、手,電動切換機構，除就地操作外還可進行遠距離操作?？筛鶕?jù)用戶要求選配揚州電力設備修造廠引進西門子技術生產的2SA30系列、上海自動化儀表股份有限公司十一廠引進英國ROTORK生產的A系列、瑞基測控設備有限公司生產的RA系列電動頭。 安裝說明:
1、電動閘閥必須垂直安裝，閥桿向上，介質流向可從任何一側流入。
2、電動裝置安裝在環境溫度為一20"C～+40℃，相對濕度≤80％無腐蝕，無****性氣體環境中。
3、電動裝置用于管道溫度低于350"(：時，則采用半流體鋰基潤滑油(Q／sYl002—65) 用于管道溫度高于350~(：時，則采用DIN492—2N一4鈉基潤滑脂進行潤滑。
 Germany Omar brands imported as a lifting device with high temperature and high pressure power station gate valves installed on water, steam pipes.
Structure outlined:
1, high temperature high pressure power station gate valve with pressure from the tight-sealing structure, flexible gate, both ends of the manifold even welding.
Seat sealing surface cobalt-based alloy plasma spray welding made of wear-resistant, anti-abrasion performance.
Valve sealing surface hardening nitriding treatment.
3, stem surface nitriding process of corrosion resistance, good corrosion resistance and scratch resistance.
4, the high temperature high pressure station the gate valve opening and closing is controlled by the electric device, the electrical device equipped with dedicated motor, speed reducer, torque control means, live operating mechanism, the hand, the electric switch mechanism, except local operation can also be remote operation. A Series of the British ROTORK production can be introduced 2SA30 series introduce Siemens technology to produce according to the user requirements optional power equipment repair plant in Yangzhou, Shanghai Automation Instrumentation Co., Ltd. eleven plant Rickey monitoring and control equipment Limited the RA series production electric head.
Installation instructions:
1, the electric valve must be installed vertically, stem up, medium flow from either side of the inflow.
Electric device installed in a 20 "C to +40 ° C ambient temperature, relative humidity ≤ 80% non-corrosive, no **** gas environment.
Electric device for pipe temperature below 350 "(:, semifluid lithium-based lubricant (Q/sYl002-65) for pipe temperature is higher than 350 ~ (:, DIN492-2N 4 sodium based grease |
會員1.png)
五峰|
鄯善县|
屯留县|
周至县|
宁明县|
信阳市|
钟祥市|
房产|
宿松县|
娄底市|
蕲春县|
咸宁市|
丁青县|
方山县|
松滋市|
婺源县|
南丰县|
宜兰县|
东阳市|
平乐县|
循化|
宁阳县|
洛南县|
同心县|
景洪市|
饶河县|
海林市|
增城市|
武城县|
弥渡县|
论坛|
宿松县|
黎平县|
甘南县|
白玉县|
永修县|
博客|
馆陶县|
江城|
曲松县|
临潭县|