Anritsu | MS8607A 數字移動無線發射機測試儀|日本安立|MS8607A|綜合測試儀 品牌:日本安立 | Anritsu 特點 ·DMR Transmitter Tester MS8607A
·DMR 發射器測試儀MS8607A
·300 kHz to 3 GHz
·FEATURES
·Built-in spectrum analyzer, analog measurement functions, and power meter
·內置頻譜分析儀， 模擬測量函數，和功率計
·Multisystem support
·多系統支持
·Widebａnd CDMA analysis
·寬帶CDMA分析
·IQ (Baseband) signal analysis
·IQ（基帶）信號分析
·DMR Transmitter Tester
·MS8606A
·300 kHz to 3 GHz
·DMR傳送器測試儀 MS8606A
·300 kHz to 3 GHz
·For CDMA, PDC measurement
·對于CDMA的配電測量
·High-speed, high precision measurement
·高速高精度的測量
·Built-in spectrum analyzer and AF measurement function
·內置頻譜分析儀和音頻測量功能 技術指標 | Frequency range | 300kHz to 3Ghz | | Max.input level | MAIN connector:+40dBm(10W);AUX connector:+20dBm(100mW) | | Input impedance | 50Ω,VSWR:≤1.2(<2.2GHz,MAIN connector),≤1.3(>2.2GHz,AUXconnector) | | Input connector | N-type(MAIN connector),TNC-type(AUX connector) | | Peference oscillator | Frequency:10MHz
Starting characteristics:≤5*10^-8/day(after 10 minutes of warm-up,comparedto the frequency after 24-hour warm-up)
Aging rate:≤2*10^-8/day(0°to 50℃,compared to the frequency after 24-hourwarm-up)
Temperature characteristics:≤5*10^-8/day(0°to 50℃,compared to the frequencyat 25℃)
External reference input:10 or 13MHz(±1 ppm),2 to 5Vp-p | | Power meter | Frequency rang:300kHz to 3Ghz
Level range:0 to +40dBm
Measurement accuracy:±10%(after zero calibration) | |
S
p
e
c
t
r
u
m
a
n
a
l
y
z
e
r
| Frequency | Frequency setting
Setting range:0 to 3GHz(band:0),10MHz to 3GHz(band:1)*Setting resolution:1Hz
HPF:1.6 to 3GHz,On/Off
Frequency accuracy
Display accuracy:±(display frequency x reference frequency accuracy+spanx span accuracy)
Normal marker:Same as span accuracy
Frequency span
Setting range:0Hz,10kHz to 3GHz(band:0);0Hz,10kHz to 2.99GHz(band:1)
Span accuracy:±2.5%
RBW(resolution bandwidth)
Setting range:300Hz to 1MHz(3dB BW,1-3 sequence)
Accuracy:±2%(300Hz to 300kHz),±10%(1MHz)
Selectivity(60dB:3dB):≤5:1
VBW(video bandwidth):3Hz to 100kHz(1-3 sequence),through
Sidebａnd noise:≤-95dBc/Hz(1GHz,10kHz offset),≤-115dBc/Hz(1Ghz,100kHz offset) | | Amplitude(at band:1) | Maximum input level
Continuous average power:+40dBm(MAIN connector),+20dBm(AUX connector)
DC voltage:0V
Average noise level(RBW:1kHz,VBW:10Hz):
≤-90dBm(MAIN connector,10MHz to 1GHz,input attenuator:20dB)
≤-90dBm+f[Ghz](MAIN connector,>1Ghz,input attenuator:0dB)
≤-110dBm+f[Ghz](AUX connector,10MHz to 1Ghz,input attenuator:0dB)
≤-110dBm+f[GHz](AUX connector,>1GHz,input attenuator:0dB)
Residual response:≤-70dBm(MAIN connector,input attenuator:20dB),≤-90dBm(AUXconnector,input attenuator:0dB)
Total level accuracy
MAIN connector:±1.5dB(reference level:+10.1 to +40dBm,at 0 to -50dB of referencelevel)
AUX connector:±1.5dB(reference level:-9.9 to +20dBm,at 0 to -50dB of referencelevel)
Reference level
Setting range:-60 to +50dBm(MAIN connector),-80 to +30dBm(AUX connector)
Setting resolution:0.1dB
Accuracy:±0.5dB(MAIN connector,+10.1 to +40dBm),±1.0dB(MAIN connector,-80to -10dBm),
±0.5dB(AUX connector,-9.9 to +20dBm),±1.0dB(AUX connector,-80 to -10dBm)
RBW switching error:±0.1dB(referenced to RBW:3kHz)
Frequency response:±0.5dB[referenced to 100MHz,input attenuator:30dB(10dBfor AUX);temperature range:18°to 28℃]
Log linearity:±0.5dB(0 to -50dB,RBW:≤1MHz),±1.0dB(0 to -70dB(0 to -70dB,RBW:≤1kHz)
*10MHz to 2.2GHz,reference level:≥0dBm(MAIN connector);≥-20dBm(AUX connector)
2nd harmonic distortion:≤-55dBc(10 to 100MHz),≤-60dBc(100 to 1500MHz)*Atmixer input level:-30dBm | | Sweep | Setting range:100ms to 1000s(frequency axis sweep),100ms to 1000s(timeaxis sweep,RBW:≤1kHz),10ms to 1000s(time axis sweep,RBW:3 to 10kHz);1msto 1000s(time axis sweep,RBW:≥30kHz)
Trigger switch:FREERUN,TRIGGERED
Trigger source:WIDE IF VIDEO (3 dB bandwidth:≥20MHz,trigger slope:RISE/FALL)
EXT(trigger level:TTL level,trigger slope:RISE/FALL)
Trigger delay
Setting range:0μs to 100ms;Resolution:2μs
Gate delay,gate width
Setting range:2μs to 100ms;Resolution:2μs | | Functions | Marker
Signal search:PEAK-CF,PEAK-REF
Zone marker:NORMAL,DELTA
Marker-function:MARKER-CF,MARKER-REF,ZONE-SPAN
Peak search:PEAK,,NEXT RIGHT pEAK,NEXT LEFT PEAK
Measurement
Noise power:dBm/Hz,dBm/ch
Occupied bandwidth:Power N% method,X dB down method
Adjacent channel power
Reference measurement:Total power/reference level method
Display method:Channel specified display(2 channels X 2),graphic display
Average power of burst signal:Average power within the specified time rangeof the time domain waveform | | Others | Number of data points:501
Detection mode:POS PEAK,NEG PEAK,SAMPLE
Display function:TRACE A,TRACE B,TRACE TIME
Storage funciton:NORMAL,VIEW,MAX HOLD,MIN HOLD,Average,CUMULATIVE<> | | RF analyzer | Power measurement(wide band)
Frequency range:300kHz to 3Ghz;Level range:0 to +40dBm(MAIN connector);Accuracy:±10%(afterzero point calibration)
Power measurement(narrow band)
Frequency range:10MHz to 3GHz
Input level:0 to +40dBm(MAIN connector),-40 to +20dBm(AUX connector)
Accuracy:±10%(MAIN connector,after calibration with internal wide bａnd powermeter)
±1dB(AUX connector,reference level:≥-12dBm,18°to 28℃,after calibration)
Linearity: ±0.3dB(0 to -30dB)
Freqeuncy measurement
Frequency range:10MHz to 3Ghz
Input level:-20 to +40dBm(MAIN connector),-40 to +20dBm(AUX connector)
Resolution:1Hz
Accuracy:±(reference oscillator accuracy+10Hz) *IF frequency counting (bandwidth:±30kHz)
FM measurement
Frequency range:10MHz to 3Ghz
Input level:-20 to +40dBm(MAIN connector),-40 to +20dBm(AUX connector)
Deviation:0 to 20kHz
Demodulation frequency:30Hz to 20kHz
Accuracy:1% of indicated value+residual FM(demodulaiton frequency:1kHz)
Frequency response:±0.5dB(demodulation frequency:referenced to 1kHz)
Residual FM:8Hz-rms(demodulation frequency:0.3 to 3kHz)
Distortion:0.3%(demodulation frequency:1kHz,demodulation bandwidth:0.3 to3kHz,deviation:5kHz)
Filters(3dB cut-off):HPF(50Hz,300Hz),LPF(3kHz,15kHz)
φM measurement
Frequency range:10MHz to 3Ghz
Input level:-20 to +40dBm(MAIN connector),-40 to +20dBm(AUX connector)
Deviation:0 to 10rad
Demodulation frequency :300Hz to 3kHz
Accuracy:1% of indicated value+residual φM(demodulation frequency:1kHz)
Frequency response:±0.5dB(demodulation frequency:referenced to 1kHz)
Residual φM:0.01 rad-rms (demodulation bandwidth:0.3 to 3kHz)
Distortion:0.5%(demoduation frequency:1kHz,demodulation bandwidth:0.3 to3kHz,deviation:5rad)
Filters(3dB cut-off):HPF(50Hz,300Hz),LPF(3kHz,15kHz) | | | Others | Display:Color TFT-LCD,7.8inch,640*480dots
Hard copy:Enables data hard copy of the display through a parallel interface(printer:ESC/Pcompatible printer).
GPIB:This instruments in specified as a device,can be controlled from externalcontroller(excluding power switch).
Interface functions:SH1,AH1,T6,L4,SR1,RL1,PP0,DC1,DT1,C0,E2)
Parallel interface:Conforms to the Centronics.Outputs printing data to printer.D-sub25-pin connector(female)
RS-232C:All functions except power switch controlled by external controller(baudrate:1200,2400,4800,9600bps) | | Dimensions and mass | 426(W)*221.5(H)*451(D)mm,≤22kg | | Power | 100 to 120/220 to 240Vac(-15%/+10%,max.voltage:250V,automaticvoltage switch system),47.5 to 63Hz,≤300VA | | Operating temperature | 0°to 50℃ | | EMC | EN55011:1991,Group 1,Class1
EN50082-1:1992
Harmonic current emissions:EN61000-3-2:1995 Class A | | Safety | EN61010-1:1993(Installation Category II,Pollution DegreeII) |
訂貨信息
| Model/Order No. | Name | | MS8607A
J0576B
J0768
J0017F
F0014
W1367AE
MS8607A-01 | Mainframe
Digital Mobile aRadiO TRANSMITTER Tester
Standard accessories(for mainframe)
Coaxial cord(N-P.5D-2W.N-P),1m
Coaxial adapter(N-J.TNC_P)
Poewer cord 2.6m
Fuse,6.3A
MS8607A operation manual:
Options
AF measurement(audio analzer,AF oscillator | | MX860701B
MX860702A
MX860704A
W1368AE
W1369AE
W1379AE | Measurement software
CDMA Measurement Software
PDC Measurement Software
W-CDMA Measurement Softwae
Standard accessories(for measurement software)
MX860701B operation manual 1copy
MX860702A operation manual 1copy
MX860704A operation manual 1copy | | MS2602A
MS2663C
J0127C
J0769
J0040
MN1607A
MA1612A
J0395
J0007
J0008
B0329D
B0331D
B0332
B0333D
B0334D | Peripherals
Spectrum Anylyzer
Spectrum Anylyzer
Optional accessories
Coaxial cord(BNC-P.RG-58A?U.BNC-P),0.5m
Coaxial adapter(BNC-J.TNC-P)
Coaxial adapter(N-P.BNC-J)
Coaxial switch(DC to 3GHz,50Ω,external controllable)
Four-point junction pad(5 to 30000MHz)
Fixed attenuator for high power(30dB,30W,Dc to 8GHz)
GPIB cable,1m
GPIB cable,2m
Front cover(1MW5U)
Front handle(2pcs/1set)
Front handle(2pcs/1set)
Joint plate(4 pcs/set)
Rack moun kit
Carrying case(hard type) | |
會員1.png)
淮阳县|
嫩江县|
明水县|
广灵县|
庆元县|
北辰区|
北川|
太原市|
通道|
陆丰市|
保定市|
永川市|
辽阳市|
屏山县|
红桥区|
开平市|
南通市|
监利县|
焉耆|
吴桥县|
黔江区|
曲松县|
朝阳县|
沙雅县|
额敏县|
垣曲县|
宝丰县|
宜昌市|
绩溪县|
高青县|
新安县|
漯河市|
江陵县|
莱西市|
黄浦区|
仙桃市|
江阴市|
涞水县|
黄冈市|
磐石市|
布拖县|