上海美盛自動化設備有限公司
| 參 考 價 | 面議 |
產品型號LMI Liquitron Controllers
品 牌
廠商性質其他
所 在 地
聯系方式:仝先生查看聯系方式
更新時間:2023-03-09 09:50:35瀏覽次數:210次
聯系我時,請告知來自 儀表網LMI Liquitron Controllers DC5500冷卻塔控制器,遠程編程及通訊冷卻塔控制器DC4500DC4000冷卻塔/鍋爐控制器DP5000 pH值控制器DR5000 ORP控制器FS5000流量開關控制器
LMI Liquitron Controllers
DC5500冷卻塔控制器,遠程編程及通訊
冷卻塔控制器DC4500
DC4000冷卻塔/鍋爐控制器
DP5000 pH值控制器
DR5000 ORP控制器
FS5000流量開關控制器
LiquitronTM Controllers
DC5500 Cooling Tower Controller with Remote Programming & Communications - New!
The DC5500 has all of the features of the popular DC4500 Controller(see below); dual biocides & inhibitor pumps control, 0-20,000mS conductivity range, four feed modes, etc. The DC5500 also has the additional features of a second water meter input, three tank level inputs, and most importantly- communications capabilities to download historical data, view real time conditions, and program the controller remotely. Each DC5500 has an RS232 serial port for data downloads into a pc or Palm Pilot™, or for quickly programming the various controller settings with a computer in a user-friendly pull-down menu format. Up to (31) DC5500 Controllers can be linked to a single LiquiComm Communications Module for remote communications on a standard analog phone line. The DC5500 can be used with a LiquiComm Communications Module and the LMI DataComm Software as a complete information management system for remote cooling tower accounts.
Click here for more information on the DC5500
DC4500 Cooling Tower Controller
The DC4500 is a bleed and feed cooling tower controller with dual biocide timers. Standard features include; four feed modes (Feed & Bleed, % of Time, % of Bleed, Flowmeter Pulse), intermittent or continuous sampling, uS or PPM display, flow totalizer, manual test modes, temperature display, biocide cycle of 7, 14, or 28 days, biocide lockout, and conductivity or time-based biocide prebleed. Programming is simple and is accomplished with only three keys. The backlit liquid crystal display and LEDs provide a visual indication of operating conditions and equipment status.
Click here for more information on the DC4500
DC4000 Cooling Tower/Boiler Controller
The DC4000 may be programmed as a bleed and feed cooling tower controller or boiler controller. Standard features include; four feed modes (Feed & Bleed, % of Time, % of Bleed, Flowmeter Pulse), intermittent or continuous sampling, uS or PPM display, flow totalizer, and manual test modes. The boiler mode includes a time-trap sampling method that prevents the flashing problems that are so common in boilers. Programming is simple and is accomplished with only three keys. The backlit liquid crystal display and LEDs provide a visual indication of operating conditions and equipment status.
Click here for more information on the DC4000
DP5000 pH Controller
The DP5000 pH Controller is designed for a variety of industrial pH applications including water treatment, metal finishing, PCB manufacturing and waste treatment. It provides on/off or proportional (pulse) control of metering pumps for addition of acid or base. Level and flow inputs and alarm outputs are standard. An advanced menu includes special features such as the solenoid dump valve control for batch treatment and a “Point 3” (inflection point) adjustment for fine tuning the control profiles of the metering pumps. 4-20mA output is optional.
Click here for more information on the DP5000
DR5000 ORP Controller
The DR5000 ORP Controller is very similar to the DP5000 described above, however, it is designed to control LMI Metering Pumps for the addition of oxidizing and reducing agents. It shares the same features and options as the DP5000 and is often used in water and wastewater treatment, fruit processing and metal finishing.
Click here for more information on the DR5000
FS5000 Flow Switch Controller
The FS5000 Flow Switch Controller is designed for use in applications that require flow/no-flow control of metering pumps and other devices. It includes a flow switch and three (3) 115V receptacles that are powered with flow and one (1) 115V service receptacle. Power indicator light, flow indicator light and test switch are included.
Click here for more information on the FS5000
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
儀表網 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
上傳附件
號碼可能有誤,請核對!
請選擇省份
聯系方式
上海美盛自動化設備有限公司
上傳附件
东丽区|
辽源市|
龙门县|
松江区|
华容县|
施秉县|
科技|
高要市|
甘谷县|
翼城县|
扎赉特旗|
洛南县|
涿鹿县|
大埔县|
新密市|
合肥市|
明光市|
稷山县|
白银市|
嘉鱼县|
多伦县|
桃园县|
浪卡子县|
府谷县|
万年县|
丰原市|
竹溪县|
包头市|
高邑县|
英山县|
察哈|
会宁县|
洪湖市|
甘德县|
许昌市|
洪洞县|
灵山县|
精河县|
泸溪县|
东乡|
峨眉山市|
