上海美盛自動化設備有限公司
會員1.png)
上海美盛自動化設備有限公司
| 參 考 價 | 面議 |
產品型號Specialty Products
品 牌
廠商性質其他
所 在 地
聯系方式：仝先生查看聯系方式
更新時間：2023-03-12 08:42:50瀏覽次數：179次
聯系我時，請告知來自 儀表網Specialty Products1,P-Trim Multi-Stage Plug Throttling2,Synflow Sweep Angle Valves for Synfuel Service3,Noise Reduction Devices for Systematic Noise Control
Specialty Products P-Trim Multi-Stage Plug Throttling The multi-keyed plug and throttling orifice chamber in Mark P Trim valves uses two to seven stages to reduce the pressure gradually instead of handling an ultra-high pressure drop in a single stage. By accurately controlling the pressure drop in each stage to 700 psi or less, velocities are reduced and cavitation noise and vibration are prevented. The slightest casting imperfections can lead to premature valve failure, so Leslie precision machines all internal throttling surfaces assuring actual trim conforms to theoretical design values. P-Trim valves are available in 2" to 6" sizes for throttling drops to 5000 psi and body ratings to ANSI Class 3500. Synflow Sweep Angle Valves for Synfuel Service Slurry letdown service is the most critical of these applications, involving three-phase flow of solids, liquids and gases at extremely high temperatures and pressure drops that can destroy a conventional valve in a matter of hours. The Synflow Valve has been used successfully in a number of synfuel pilot plant situations where its actual service life has exceeded that of other valves by several orders of magnitude. Ccritical body passages of the Synflow are designed to keep wear to a minimum. Plugs and seats are a special tungsten-carbide alloy for corrosion and abrasion resistance. To facilitate maintenance and inspection, all internal parts (except the seat ring) are easily removable from the top of the valve. In the bonnet closure, all boltings and gaskets are designed to eliminate problems inherent in thermal transients. Noise Reduction Devices for Systematic Noise Control
1,P-Trim Multi-Stage Plug Throttling
2,Synflow Sweep Angle Valves for Synfuel Service
3,Noise Reduction Devices for Systematic Noise Control
Specialty Products 
To prevent cavitation and subsequent damage in ultra high pressure letdown service, P-Trim valves employ three techniques:
A unique plug/chamber design sharply reduces and controls, velocity and
pressure drops at any point in the valve interior. Material selection is limited to proven alloys that have demonstrated high
erosion resistance and good wear characteristics after years in service. The industry's highest standards of precision machining, finish quality and
overall quality assurance are met or exceeded.
The Leslie Synflow Valve has been especially designed for the most difficult applications in synthetic fuel, refining, petrochemical and oil & gas industries. This type of sweep angle design has been applied successfully in:
Slurry letdown Visbreaker Hot separator letdown Well choke production H-Oil letdown 
An economical way to reduce control valve or reducing valve noise by 6 to 12 dBA is to install the Les-Sonic Silencing Orifice downstream from the valve between two flanges. A Leslie Noise Suppressor installed at the valve outlet, will reduce pipeline carried noise by 10 to 20 dBA. For maximum reduction of pipeline transmitted noise, the conbined installation of a Les-Sonic Silencing Orifice and a Noise Suppressor will reduce the sound pressure level by 16 to 32 dBA.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
儀表網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
盐池县|
阿图什市|
洪洞县|
孝感市|
固始县|
旅游|
紫金县|
鸡泽县|
武陟县|
鹿泉市|
鹰潭市|
定安县|
布尔津县|
新建县|
聂拉木县|
鹤庆县|
右玉县|
辽阳市|
平谷区|
永宁县|
九寨沟县|
永平县|
碌曲县|
仲巴县|
衡南县|
莲花县|
临洮县|
安仁县|
额济纳旗|
江阴市|
东丰县|
靖边县|
大方县|
巫溪县|
珲春市|
霍林郭勒市|
桓仁|
罗定市|
大城县|
宝应县|
岳阳县|