當前位置：上海凱祥閥門有限公司>>美國愛諾AERO執行器>>氣動執行器>>愛諾aero2氣動執行器

愛諾aero2氣動執行器

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質生產商

所在地上海

在線詢價收藏產品

聯系方式：黃永明查看聯系方式

更新時間：2026-02-28 07:08:32瀏覽次數：330次

聯系我時，請告知來自儀表網

產品分類 品牌分類

  美國愛諾AERO執行器

氣動執行器

全部產品列表

暫無信息

上海凱祥閥門有限公司

經營模式：生產廠家

商鋪產品：118條

所在地區：上海上海市

聯系人：黃永明（總經理）

詢價 給他留言

產品簡介

詳細介紹

愛諾aero2氣動執行器
1、indicator 指示器
position indicator with namur is convenient for mounting    accessories such as limit switch box,positioner and so on
namur 標準指示器便于安裝位置開關、定位器等附件。
2、pinion 輸出軸
the pinion is high-precision and integrative, made from   nickelled-alloy steel, full conform to the lastest standards of iso5211, din3337, namur.the dimensions can be customized and the stainless steel is available.
鍍鎳合金鋼、高精密一體式輸出軸同時符合namur、iso5211、din3337標準?？筛鶕?jù)客戶要求定制尺寸和不銹鋼材料。
3、actuator body 缸體
according to the different requirements, the extruded aluminum alloy astm6005 body can be treated with hard anodized, powder polyester painted (different colours is available such as blue, orange, yellow etc.), ptfe or nickel plated.
astm6005壓鑄鋁合金缸體可以采用硬質氧化、環氧樹脂噴涂（根據要求噴涂蘭色、橙色、黃色等）、ptfe涂層或鍍鎳滿足不同要求。
4、end caps 端蓋
die-casting aluminum powder polyester painted in different colours ,ptfe or nickel plated
愛諾 aero2 rt2700da氣動執行器壓鑄鋁合金表面金屬粉末噴涂各種顏色、ptfe涂層或鍍鎳處理。
5、pistons 活塞
the twin rack pistons are made from die-casting aluminum treated with  hard anodized or made from cast steel with galvanization. symmetric mounting position,long cycle life and fast operation, reversing rotation by simply inverting the pistons.
雙活塞齒條、采用鑄鋁硬質氧化或者鑄鋼鍍鋅處理，安裝位置對稱、運作迅速、使用壽命長，簡單的顛倒活塞可以改變旋轉方向。
6、travel adjustment 行程調節
the two independent external travel stop adjustment bolts can adjust ±5°at both open and close directions easily and precisely.
兩個獨立的行程調節螺釘可以進行方便、精確±5°的調節 開、關位置。
7、high performance springs 高性能彈簧
preloaded coating springs are made from the high quality material for resistant to corrosion and longer service life, which can be demounted safely and conveniently to  satisfy different requirements of torque by changing quantity of springs.
采用優質材料、涂層處理，預壓裝配。具有較強的抗腐蝕性和使用壽命。能夠安全、簡單的拆卸單作用執行器，通過改變彈簧數量滿足不同的力矩輸出范圍。
8、bearings & guides 軸承、導板
made from low friction,long-life compound material,to avoid the direct contact between metals. the maintenance and replacement are easy and convenient.
采用低摩擦、長壽命復合材料，避免了金屬與金屬的直接接觸，維修更換簡單方便。
9、o-rings 密封
nbr rubber o-rings provide trouble-free operation at standard temperature ranges.for high and low temperature applications viton or silicone.
在常溫工作條件下使用橡膠，在高溫或低溫時采用氟橡膠或硅橡膠。
air to port a forces the pistons outwards, causing the pinion to turn counterclockwise while the air is being exhausted from port b.
air to port b forces the pistons inwards, causing the pinion to turn clockwise while the air is being exhausted from port a.
a口進氣，壓縮空氣推動活塞向外運動，使執行器輸出軸逆時針旋轉(0o-90o)，b口排氣。 b口進氣，壓縮空氣推動活塞向內運動，使執行器輸出軸順時針旋轉(90o-0o)，a口排氣。
雙作用執行器輸出力矩(unit:nm)

氣源壓力	輸入氣源壓力(單位：巴)
型號	2	2.5	3	4	4.5	5	5.5	6	7	8
rt020da	8.0	10.0	12.0	16.0	18.0	20.0	21.9	23.9	27.9	31.9
rt035da	14.6	18.2	21.9	29.2	32.8	36.5	40.1	43.8	51.1	58.4
rt050da	20.1	25.1	30.1	40.1	45.1	50.2	55.2	60.2	70.2	80.3
rt075da	31.4	39.2	47.0	62.7	70.5	78.4	86.2	94.1	109.7	125.4
rt110da	45.1	56.4	67.7	90.3	101.6	112.9	124.1	135.4	158.0	180.6
rt160da	66.1	82.7	99.2	132.2	148.8	165.3	181.8	198.4	231.4	264.5
rt255da	100.3	125.4	150.5	200.6	225.7	250.8	275.9	301.0	351.1	401.3
rt435da	171.0	213.8	256.5	342.0	384.8	427.5	470.3	513.0	598.5	684.0
rt665da	266.0	332.5	399.0	532.0	598.5	665.0	731.5	798.0	931.0	1064.0
rt1000da	425.6	532.0	638.4	851.2	957.6	1064.0	1170.4	1276.8	1489.6	1702.4
rt1200da	532.0	665.0	798.0	1064.0	1197.0	1330.0	1463.0	1596.0	1862.0	2128.0
rt1800da	769.5	961.9	1154.3	1539.0	1731.4	1923.8	2116.1	2308.5	2693.3	3078.0
rt2700da	1169.6	1462.1	1754.5	2339.3	2631.7	2924.1	3216.5	3508.9	4093.7	4678.6
rt3800da	1526.0	1980.0	2288.6	3052.6	3434.0	3815.0	4196.9	4578.2	5341.0	6104.0
rt5700da	2285.0	2856.1	3427.3	4570.4	5140.6	5172.0	6283.0	6854.1	7797.0	9138.0
rt8000da	3256.3	4070.1	4884.0	6512.0	7326.0	8140.3	8954.4	9768.1	11396	13024

雙作用執行器的選型:
在正常操作條件下，雙作用執行器考慮的安全系數為20%-30%。
示例：
閥門力矩=100nm
安全力矩=100×(1+30%)=130nm
氣源壓力=5bar
對照雙作用力矩表，選配雙作用執行器zui小規格為rt160da，扭矩為165.3nm.
sizing: double acting actuator
the suggested safety factor for double acting actuators under normal working conditions is 20%-30%.
example:
the torque needed by valve=100n.m
the torque considered safety factor (1+30%)=130n.m，
air supply=5bar
according to the above table, we can choose the minimum model is rt160da.  torque is165.3nm .
pneumatic acs
output torque of spring return actuators
單作用執器輸出力矩 (unit: nm)

氣源壓力	5bar		6bar		7bar		8bar		彈簧輸出力矩(nm)
型號model	開始0°	結束90°	開始0°	結束90°	開始0°	結束90°	開始0°	結束90°	開始0°	結束90°
rt020srk10	11.5	6.7	15.5	11.6	20.3	16.8	23.4	19.3	12.4	8.5
rt035srk10	22.8	15.6	30.0	22.8	37.3	30.1	44.7	37.4	20.9	13.7
rt050srk10	28.8	21.2	39.0	31.2	49.1	41.2	59.0	51.2	29.0	21.1
rt075srk10	46.7	32.3	62.4	48.0	78.1	63.7	93.8	79.3	46.0	31.6
rt110srk10	66.2	44.1	88.8	66.7	111.3	89.2	134.0	111.8	68.7	46.7
rt160srk10	102.0	66.5	135.1	99.6	168.2	136.6	201.2	165.7	98.4	63.3
rt255srk10	146	94	196	144	247	194	297	245	157	105
rt435srk10	256	169	341	255	427	340	512	426	258	172
rt665srk10	386	248	519	381	652	514	785	647	417	279
rt1000srk10	664	446	877	658	1090	871	1302	1084	618	400
rt1200srk10	780	570	1046	836	1312	1102	1578	1368	760	550
rt1800srk10	1103	816	1488	1201	1872	1586	2257	1970	1108	821
rt2700srk10	1805	1352	2390	1937	2974	2521	3560	3107	1572	1119
rt3800srk10	2193	1458	2956	2221	3719	2984	4482	3747	2122	1460
rt5700srk10	3105	1929	4247	3071	5090	4214	6532	5356	3405	2346
rt8000srk10	4057	1738	5685	3366	7312	4993	8940	6621	5761	3674

單作用執行器的選型
在正常情況下考慮安全系數為30％-40％
例如:閥門力矩為80nm
安全力矩為:80*(1+30％)=104nm
氣源壓力為5bar 對照單作用輸出力矩表,可以選rt435srk10
壓縮空氣對應的力矩為: 0°=256, 90°=169
此時彈簧輸出的力矩對應為90°=258, 90°=172，所有輸出力矩均大于我們需求。

型號	a	b	c	d	e	f	g	h	i	j	k	l	m	n	z	φ	氣源接口
model	a	b	c	d	e	f	g	h	i	j	k	l	m	n	z	φ	air connection
rt020	30	41.5	65.5	72	92	65	30	80	φ36	φ50	m5x8	m6x10	11	14	147	φ40	namur g1/4"
rt035	36	47	81	87.5	107.5	72	30	80	φ50	φ70	m6x10	m8x13	14	18	168	φ40	namur g1/4"
rt050	42	53	94	99.5	119.5	81	30	80	φ50	φ70	m6x10	m8x13	14	18	184	φ40	namur g1/4"
rt075	46	57	98.5	108.7	128.7	92	30	80	φ50	φ70	m6x10	m8x13	17	21	204	φ40	namur g1/4"
rt110	50	58.5	111	116.5	136.5	98	30	80	φ50	φ70	m6x10	m8x13	17	21	262	φ40	namur g1/4"
rt160	57.5	64	122.5	133	153	109.5	30	80	φ70	φ102	m8x13	m10x16	22	26	268	φ40	namur g1/4"
rt255	67.5	74.5	145.5	155	175	127.5	30	80	φ70	φ102	m8x13	m10x16	22	26	301	φ55	namur g1/4"
rt435	75	77	161	172	192	137.5	30	80	φ102	φ125	m10x16	m12x20	27	31	390	φ55	namur g1/4"
rt665	87	87	184	197	217	158	30	80	φ102	φ125	m10x16	m12x20	27	31	458	φ55	namur g1/4"
rt1000	103	103	213	230	260	189	30	130		φ140		m16x25	36	40	525	φ80	namur g1/4"
rt1200	113	113	235.5	255	285	210	30	130		φ140		m16x25	36	40	532	φ80	namur g1/4"
rt1800	130	130	264.5	289	319	245	30	130		φ165		m20x25	46	50	602	φ80	namur g1/4"
rt2700	147	147	299	326	356	273	30	130		φ165		m20x25	46	50	722	φ80	namur g1/2"
rt3800	162	162	348	348	378	324	30	130	φ165	φ215	m20x25	m20x25	46	60	742	φ80	namur g1/2"
rt5700	190	190	402	402	432	380	30	130	φ165	φ215	m20x25	m20x25	46	60	860	φ80	namur g1/2"
rt8000	258	258	464	464	494	298	30	130	φ165	φ254	m20x25	8-m16x25	55	60	924	φ80	namur g1/2"

愛諾aero2執行器工作技術條件: operating conditions
1.工作介質operating media
干燥或潤滑的空氣或無腐蝕性氣體介質中雜質微粒小于30μm。
dry or lubricated air, or the non-corrosive gases
the maximum particle diameter must less than 30μm
2. 氣源壓力air supply pressure
zui小氣源壓力2.5巴，zui大氣源壓力8巴。
the minimum supply pressure is 2.5 bar
the maximum supply pressure is 8 bar
3.介質環境溫度operating temperature
標準：-20℃~+80℃
低溫：-35℃~+80℃
高溫：-15℃~150℃
standard:-20℃~+80℃
low temperature:-35℃~+80℃
high temperature:-15℃~+150℃
4.行程調節 travel adjustment
0°和90°兩個位置
有±5°的調節范圍
have adjustment range of ±5°for the rotation at 0°and 90
5.使用場合application
室內或室外安裝either indoor or outdoor
執行器動作形式
動作形式operating type
單作用和雙作用double acting and spring return
1.氣源接口符合namur標準，可簡單方便地安裝電磁閥。1.air supply connection is designed in accordance with namur standard to install solenoid valves.
2.輸出軸的namur標準槽和缸體上部標準安裝孔，可使限位開關、定位器直接嚙合和安裝。2.the namur drive pinion and the namur top mounting connection permit direct installation of accessories such as limit switch box and positioner.
3.底部安裝孔設計符合iso5211、din3337標準，可以直接安裝離合器(氣動手輪機構)或安裝支架。3.bottom mounting connection is designed in accordance with iso5211 and din3337 standards for direct mounting with valve gear boxes or mounting brackets.
產品序列號、氣源接口及底部安裝孔全部電腦打字，易于辨識和跟蹤服務。each actuator is marked with a serial number, air connection and bottom mounting holes are marked for easy track and distinction.
air consumption 耗氣量

	開向體積和關向體積 air volume opening & closing				unit: l
model	air volume opening	air volume closing	model	air volume opening	air volume colsing
型號	開向體積(升)	關向體積(升)	型號	開向體積(升)	關向體積(升)
rt020	0.12	0.16	rt435	2.5	2.2
rt035	0.21	0.23	rt665	3.7	3.2
rt050	0.3	0.34	rt1000	5.9	5.4
rt075	0.43	0.47	rt1200	7.5	7.5
rt110	0.64	0.73	rt1800	11	9
rt160	0.95	0.88	rt2700	17	14
rt255	1.6	1.4

air consumption rest with air supply. air volume and action cycle times, expressions:
weight table 重量表

model	rt020 (φ52)	rt035 (φ63)	rt050 (φ75)	rt075 (φ83)	rt110 (φ92)	rt160 (φ105)	rt255 (φ125)	rt020 (φ52)
型號	rt020 (φ52)	rt035 (φ63)	rt050 (φ75)	rt075 (φ83)	rt110 (φ92)	rt160 (φ105)	rt255 (φ125)	rt020 (φ52)
重量(da)	1.38kg	2.03kg	2.7kg	3.13kg	4.6kg	6.77kg	8.9kg	1.38kg
重量(sr)	1.45kg	2.05kg	2.9kg	3.6kg	5.22kg	6.85kg	10.11kg	1.45kg
model	rt435 (φ140)	rt665 (φ160)	rt1000 (φ190)	rt1200 (φ210)	rt1800 (φ240)	rt2700 (φ270)		rt435 (φ140)
型號	rt435 (φ140)	rt665 (φ160)	rt1000 (φ190)	rt1200 (φ210)	rt1800 (φ240)	rt2700 (φ270)		rt435 (φ140)
重量(da)	13.25kg	20.14kg	31.3kg	46.80kg	67.28kg	96.9kg		13.25kg
重量(sr)	15.55kg	24kg	35.25kg	54.8kg	80.2kg	118kg		15.55kg

注：1、sr為12根彈簧；2、重量為凈重量。