VIC-3D-Micro-DIC系統可為小視場提供高分辨率的全場應變、變形和疲勞測量及3D視頻引伸計測量。該系統是基于VICTM系列軟件(Vic-Snap，Vic-3D和Vic-Gauge)的解決方案，是3D-Micro-DIC硬件與Vic^TM軟件相結合的實用設備，可方便的在小尺度材料測試和結構分析中快速可靠地運行。

The VIC-3D-Micro-DIC system is used for full-field strain, deformation, and fatigue measurements on small field of view with high resolution (5Mpx) or as 3D Video-Extensometer (up to 500Hz). The measurement principle is digital image correlation based on the world wide established VICTM software (VicSnap, Vic-3D and Vic-Gauge). The  3D-Micro-DIC sensor hardware and Vic-software are fusing to a practical high end device for quick and reliable operation in material testing and structural analysis.

技術優勢與特征 Advantages and features of  the 3D-Micro-DIC system:

• 緊湊而剛性的設計，可快速設置和易于處理
• 系統已預設置，具有固定的視野和固定的標定參數
• 專門設計用于小型和微型的視場(FOV)測量
• 可靠且快速的USB 3.0接口，適用于臺式機或筆記本電腦
• 交鑰匙解決方案，已包括Vic-Snap和Vic-Gauge 3
• 使用Vic-3D進行穩健而可靠的后處理
• Compact and rigid design, quick set-up and easy handling
• Pre-adjusted, fixed field of view and stable calibration
• Specially designed for small and very small field of view (FOV)
• Reliable and fast USB 3.0 interface for Desktop or Laptop PCs
• Turn-key solution including Vic-Snap ａnd Vic-Gauge 3
• DRobust and reliable post-processing with Vic-3D

技術亮點 Technical highlights of 3D-Micro-DIC

• 3D全場圖像(5Mpx @ 75Hz幀頻)可連續記錄在固態存儲SSD上，單次實驗可記錄容量為SSD存儲余量
• 通過降低圖像傳感器分辨率可獲得更高幀率
  （例如[Pixel @ Hz]：1600×1200 @ 133; 1920×1080 @ 148; 1280×720 @ 217; 800×600 @ 258; 640×480 @ 315; 320×240 @ 576）
• 對應視頻引伸計功能和實時反饋控制
• 應變噪聲水平±0,001％（±10με），可通過時間平均獲得更好噪聲水平
• 根據FOV范圍，變形靈敏度可達納米尺度（1/100像素）
• 3D full field (5Mpx@75Hz frame rate) continuously recording on SSD
• Higher framerates at reduced resolution
  (e. g. [Pixel@Hz]: 1600×1200@133; 1920×1080@148; 1280×720@217; 800×600@258; 640×480@315; 320×240@576).
• suitable for Video-Extensometer functions and real time feedback control
• Strain noise level of ±0,001% (±10µstrain) and better by time averaging
• Deformation sensitivity in nm range (1/100 pixel) depending on FOV

可有效測量的空間包絡 Available measurement volume versions [mm]

Data acquisition units (DAQ) for 3D-Micro-DIC

- Image synchronised analogue data recording (8x differential mode,16 bit, ±10V)

- 2 x analogue output channels for feedback control (16 bit, ±10V)

- Camera triggering and (optional) phase synchronisation for periodic signals

- Fully integrated and supported by all VIC TM software modules