Phymetrix PPMa 便攜式露點濕度計
最小、最輕、最準確的露點儀！
多功能多用途成本效益
菜單驅動，直觀，易于使用
手持式露點儀、濕度計
范圍：-110°C 至 +20°C 露點（-166°F 至 +68°F 露點）
精度：±2°C 溫度校正
重復性：0.8°C
響應時間：3 分鐘內 95% 的階躍變化。
樣品流量：>1 LPM
Phymetrix 便攜式水分分析儀型號 PPMa 顯示在天然氣低溫分餾器中的使用。 PPMa 連接在甲醇注入后的摩爾篩干燥器之后，就在分餾低溫分離器之前。 PPMa 設置為在夜間記錄氣體的水分含量，以評估摩爾篩干燥器的容量和柱切換時間。保持低水分含量有很多好處，包括減少解凍低溫分離器以去除積冰的需要。
PPMa 在寬溫度范圍內運行的能力及其抗沖擊 IP 65 防風雨外殼使其即使在的環境中也能使用，例如科羅拉多州冬季暴風雪夜間伐木。傳感技術對甲醇的不敏感性也是該測量中獨特且重要的因素。
數據表明，摩爾篩干燥器尺寸過小，柱子切換不夠頻繁。循環中大約 6 或 7 小時出現的水分突破會增加不希望的水分。它向工程師表明，他們需要更頻繁地更換色譜柱并通過提高再生循環溫度和/或流量來更好地再生摩爾篩。
沒有其他便攜式分析儀可以在這種惡劣的環境中使用。然而，PPMa 不僅可以運行，而且可以進行其他分析儀無法執行的準確和快速的測量。大多數其他分析儀都會受到甲醇注入氣流的干擾。
特征：
快速、準確和可重復的手持式露點儀
內置溫度補償
連續狀態和診斷顯示
屏幕上的直方圖和趨勢圖
NEMA 4X 室外使用
抗沖擊 IP65 外殼，可選 ATEX 認證
用于困難現場連接的磁鐵和掛鉤
集成孔板提供壓力調節
具有自動露點校正功能的可選壓力傳感器
USB數據接口，也可以給電池充電
-110°C 至 +20°C 露點傳感器
的電子和軟件
的用戶友好界面
小巧輕便
圖形顯示
可編程數據記錄
電池支持的時鐘日歷
1/8″ Swagelok® 壓縮接頭
316 不銹鋼和 PTFE 接液部件
內置傳感器干燥劑存儲，可快速獲得結果
可選 4/20 mA 輸出
NIST 校準
沙盒平臺 PC 培訓和演示軟件
訂購信息
PhyMetrix 便攜式水分測定儀型號：PPMa
隨附配件：USB 電纜（迷你 B 公頭到 A 公頭）、帶 USB 連接器的交流通用電源適配器、兩 (2) 個 1/8 英寸管到 SAE/MS 5/16-24 Swagelok® 適配器（流量控制孔內置在一個SAE 適配器），排氣尾纖，采樣管 6 英尺 1/8 英寸直徑。鐵氟龍、吊鉤和磁鐵
壓力傳感器選項 0-150 PSIA W/ 自動壓力校正，后綴-P
高達 500 PSIA (34.5 Bar) 的高壓選項，后綴 -H
模擬輸出 4/20 mA，帶 HART® 選件，后綴 -A
本質安全 ATEX 選項，后綴 -I
標準配件
排氣尾纖
USB電纜
通用交流充電器
用于國際運輸?shù)牟孱^組
1/8" 鐵氟龍管，6' 長， 250 psi
用戶說明書
NIST 證書
| Moisture Sensor | Range: -110°C to +20°C dewpoint ( -166°F to +68°F dewpoint ) Accuracy: ±2°C temperature corrected Repeatability: 0.8°C Response time: 95% of step change in 3 min. Sample flow: >1 LPM
|
| Temperature Sensor | Range: -40°C to +70°C Accuracy: ±2°C
|
| Pressure Sensor | |
| Ergonomics | Comfortable to hold in hand, contoured body design, lightweight 1.75 Lbs Hook and magnet for easy temporary field securing / mounting Easy to read graphic LCD display with user controlled backlight brightness (LCD is readable without the backlight) Snap dome tactile membrane switches with dynamically assigned legends Audible feedback upon button press as well as for warnings and alarms Auto scaling graph / histogram on moisture measurement display for stability verification Easy to use with verbose built-in context sensitive Help screens Battery Saver, with user selectable Auto-power-down times, can also be disabled Built-in pressure measurement and pressure corrected moisture readings, simultaneously displayed with the uncorrected reading for greater ease of understanding Verbose Status bar with indications, warnings and audible errors User selectable locking with or without a password. Built-in battery backed clock calendar
|
| Electrical | External AC Universal Power adapter (100-240VAC 50-60Hz) with USB connector Rechargeable Li-Ion battery, recharges through the USB connector from the PC or from the supplied universal power adapter Sampling system and sensor are isolated from electrical interface and supply grounds Measurement resolution of moisture sensor: 1pF resulting in less than 0.01°C External power and I/O: USB mini B female connector – IP67 / IP68 with Sealing Cap
|
| Mechanical | 1/8″ Swagelok® Inlet and Outlet fitting adapters for the SAE/MS 5/16-24 ports. Inlet adapter has a built-in flow control orifice, eliminating pressure regulators while maintaining sufficient but not excessive flows. All 316 Stainless Steel and PTFE wetted parts, small surface area stainless steel sampling chamber for fast response time. Integral Sensor retraction into desiccant storage chamber for fast response-time when measuring low moisture Enclosure Impact resistant (>7 Nm to EN 50014) Polyamide 12, IP65/EN 60529 ATEX hazardous area use (Ex II 2 G) approved (PTB 02 ATEX 1076U), Flammability: UL 94 HB Abrasion resistant Polycarbonate display lens Dimensions- L: 7.36″ (187mm) W: 4.17″ (106mm) H: 1.97″ (50mm)
Weight Total: 1.75 Lbs (0.8 Kg) Pressure: 150 PSIA (10.3 Bar) — Available with High Pressure Option 500 PSIA (34.5 Bar)
|
| Temperature Range | PPMa Analyzer: -20°C to +60°C Electronics: -40°C to +85°C Moisture Sensor: -20°C to +60°C Pressure Sensor: -20°C to +85°C LCD operating: -20°C to +70°C storage: -30°C to +80°C Enclosure: -40°C to +60°C
|
| Miscellaneous Features | NIST traceable calibrations Units of measure: °C & °F dewpoint, ppmV, ppmW, µB H2O vapor pressure, grams of H2O / m3,
Lbs H2O /106 standard cubic feet in Natural Gas. (All units auto-scaled) Digital & Analog I/O: USB, 4/20mA with HART® Data logging – single point, multipoint, time stamping, each sample records: dewpoint, temperature and pressure, ( memory > 4,000 samples) Virtual Analyzer PC software for training and evaluation, allows the user to experience the exact interface on their own PC with voice explanations
|
會員1.png)
巩留县|
太和县|
朔州市|
泾阳县|
嘉黎县|
上蔡县|
沙湾县|
明光市|
宁武县|
工布江达县|
县级市|
梨树县|
修水县|
凌云县|
扶绥县|
邛崃市|
贺州市|
眉山市|
大新县|
铅山县|
乐平市|
翼城县|
岫岩|
靖边县|
甘洛县|
昭平县|
濮阳市|
汤原县|
青龙|
雷州市|
汪清县|
五指山市|
绥江县|
新巴尔虎左旗|
连山|
滕州市|
禄丰县|
石楼县|
博兴县|
南木林县|
金坛市|