上海百雒精密儀器有限公司
上海百雒精密儀器有限公司
| 參 考 價 | 面議 |
產品型號DIW-20
品 牌
廠商性質經銷商
所 在 地
聯系方式：宋琦查看聯系方式
更新時間：2018-05-14 09:00:00瀏覽次數：402次
聯系我時，請告知來自 儀表網DIW-75日本CEDAR思達數顯扭力扳手
| Screw tightening control |
| ● DIGITAL TORQUE WRENCH DIW-120/75/20/15 |
| (1) Unify the display sectiona frame. It became stronger. (2) Display Measurement Mode, Unit, Etc. on Display Section. (3) Data Output is USB Form. (4) Prepare each button in accordance with operation. Button operation became simple |
| ＊The torque screwdriver is Ergonomiclight weight, yet ruggedly constructed ＊Available in: lb-in, kg-cmN-m ＊Peak, Real TimePeak Down measuring mode (selectable) ＊800 data memory. ＊Programmable HighLow set points with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing ＊Programmable screw tightening counter ＊Programmable Auto Zero function resets unit to zero for easy operation ＊Both CWCCW operation ＊ASCII format output(USB) ＊Runs on internal NiCad batteries (for 12 hours) Auto shut-off after 10 min. of non-use ＊ AC chargercarrying case included. |
NEW DEVELOPMENT Wrench head awivels 300° |
| Specification | DIW-15 | DIW-20 | DIW-75 | DIW-120 | |
| Measuring range N・m (at the time of Track) | 0.20 - 15 N･m | 0.20 - 20 N･m | 0.20 - 75 N・m | 2.0 - 120 N・m | |
| 2.0～150 kgf・cm | 2.0～200 kgf・cm | 2.0～750 kgf・cm | 20～1200 kgf・cm | ||
| 2.0～130 lbf・in | 2.0～180 lbf・in | 2.0～650 lbf・in | 20～1040 lbf・in | ||
| Accuracy | ±0.5% (F/S) (199 or less digit±1digit) | ±0.5% (F/S) (499 or less digit±3digit) | ±0.5% (F/S) (199 or less digit±1digit） | ||
| Display | The 4 figures digital display of LCD | ||||
| The measurement direction | CW-CCW (rightleft) | ||||
| Measuring mode | P-P Peak | Holding Peak Load Value | |||
| T-R Track | Showing Real time torque value ( Used for Zero-Adjustment ) | ||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | ||||
| C Real-time output | Load torque value is outputted every about1/ 160 second | ||||
| Decision function | Setting of torque value | Programmable HighLow setpoints with both audible beepGreen/ Red LED indicator for uniform torque tightening or GO/NO GO testing | |||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | ||||
| Data spec. | Data transfer | ASCII format (Baud rate : 19200) | |||
| Data memory | 800 data / ten channels data | ||||
| A setup of the number of counts | One to 99 count (count in a direction with a bundle) | ||||
| Auto power save | 10 minutes no use, automatically switch off. | ||||
| Charging time | From empty - less than 5hours | ||||
| Continunous working time | 12 hours | ||||
| Outside size | φ34(grip)×236(L) | φ34(grip)×235(L) | φ34(grip)×320(L) | φ34(grip)×445(L) | |
| Weight (about) | 430g | 470g | 620g | 830g | |
| Socket engagement | 6.35 square, including steel ball | 9.5 square, including steel ball | 12.7 square, including steel ball | ||
| Attachment | - | One-way socket | |||
| Accessories (one piece each) | AC/DC adaptor | ||||
| An inspection report, a proofreading certificate, a traceability system figure | |||||
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
儀表網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
揭阳市|
顺昌县|
湛江市|
凌海市|
雅江县|
固原市|
北川|
肥东县|
江西省|
镇康县|
邯郸县|
通化县|
龙泉市|
石柱|
巴中市|
金堂县|
光山县|
香河县|
双柏县|
安乡县|
左云县|
贡觉县|
宁阳县|
涞水县|
广南县|
克拉玛依市|
嘉黎县|
同江市|
奉新县|
印江|
淮滨县|
晴隆县|
尉犁县|
连山|
弋阳县|
丹巴县|
江达县|
边坝县|
盐津县|
衡水市|
武安市|