| Specification | DIS-RL05 | DIS-RL2 | DIS-RL6 |
Measuring range
| 2.0～500 mN･m
0.020～5 kgf・cm
0.020～4.5 lbf・in | 0.020～2 N･m
0.20～20 kgf・cm
0.20～18 lbf・in | 0.20～6 N･m
2.0～60 kgf・cm
2.0～54lbf・in |
| Accuracy | ±0.5% (or less 499±3digit) |
| Display | The 4 figures digital display of LCD |
| The measurement direction | CW-CCW (rightleft) |
Measuring
mode | P-P Peak | Peak load value hold. |
| T-R Track | Indication of real time torque value. |
| P-D Peak down | Holding Load Value at the moment to change from upward to downword
|
| C Real-time output | Load torque value is outputted every about1/ 180 second by RS232C. |
Decision
function | Setting of torque value | A topa minimum value are in a measuring range,a setup is possible.
Can confirm the set value by the buzzer sound or LED. |
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. |
| clearance | It is a display clearance in set-up time. (0.5 - 3.0 sec) |
| One-touch zero | A clear button is pushedit is a zero. data output. |
| Data spec. | Data transfer | ASCII format (Baud rate : 19200) |
| Data memory | 800 data stored |
| Power supply | Ni-Cd chargeable battery 1.2V×4cells 450mAh |
| Auto power save | 10 minutes no use, automatically switch off. |
| Charging time | about 3hours |
| Continunous working time | 10 hours |
| Meter outside type dimension | 100(W) x105(D) x33 (H) (It does not contain by the projection thing.) |
| Weight | Meter part 520g |
| Bit/Socket part | Φ4 | HEX 6.35 |
| Accessories
(one piece each) | Φ4 bits
(＋) ♯0/♯1 | 6.35HEX bits
(＋) ♯1/♯2 |
| Receipt case |
| AC/DC adaptor |
| An inspection report, a proofreading certificate, a traceability system figure |
即墨市|
凤凰县|
洪江市|
合水县|
龙游县|
山东省|
龙门县|
剑川县|
丘北县|
富宁县|
罗定市|
永丰县|
荣成市|
扬中市|
锡林郭勒盟|
崇阳县|
鹤壁市|
多伦县|
扎囊县|
肇庆市|
会昌县|
乌恰县|
通城县|
天津市|
九寨沟县|
西林县|
甘南县|
西宁市|
石城县|
措美县|
崇阳县|
英吉沙县|
荣昌县|
女性|
娄底市|
襄垣县|
高州市|
嘉峪关市|
宁津县|
修文县|
太原市|