當前位置：陜西正捷工程科技有限責任公司>>>>AVUL系列風速變送器

AVUL系列風速變送器

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地西安市

在線詢價收藏產品

聯系方式：經理查看聯系方式

更新時間：2026-09-11 10:40:03瀏覽次數：28次

聯系我時，請告知來自儀表網

產品分類 品牌分類

  WIKA產品

DWYER超聲波流量計

DWYER液位計

DWYER流量開關

DWYER記錄儀

DWYER超聲波液位產品

WIKA壓力變送器

暫無信息

陜西正捷工程科技有限責任公司

經營模式：其他

商鋪產品：510條

所在地區：

聯系人：經理

詢價 給他留言

產品簡介

TheSERIESAVULAirVelocityTransmitterquicklyandaccuratelymeasuresairvelocityorvolumetricflowinimperialormetricunits

詳細介紹

The SERIES AVUL Air Velocity Transmitter quickly and accurately measures air velocity or volumetric flow in imperial or metric units. Simultaneous current and voltage outputs on all models provide universal inputs to monitoring equipment while the output range, units, and 0 to 5/10 VDC output can be configured via local DIP switches. The optional integral display, or the portable remote display tool, provide a convenient way to locally monitor process values and configure the unit.

Models are available in 3% and 5% accuracy models to suit a variety of needs, and the optional BACnet MS/TP or Modbus® RTU/ASCII communication protocol allows units to be daisy-chained while providing access to all of the velocity and flow data, as well as additional information such as air temperature.

ModelDescription

AVUL-3DA1Air velocity transmitter, 3% accuracy, duct mount, universal current/voltage outputs

AVUL-3DB1Air velocity transmitter, 3% accuracy, duct mount, BACnet communications

AVUL-3DM1Air velocity transmitter, 3% accuracy, duct mount, Modbus® communications

Specifications

Service:

Clean air and non-combustible, compatible gases.

Wetted Materials:

Consult factory.

Range:

1000, 2000, 3000, 4000 FPM (5, 10, 15, 20 m/s); field selectable.

Accuracy:

±(5% of reading + 0.2 m/s) or ±(3% of reading + 0.2 m/s) @ standard conditions, depending on model.

Temperature Limits:

32 to 122°F (0 to 50°C).

Power Requirements:

24 VDC ±20% or 24 VAC ±20%.

Humidity Limits.:

5 to 95% RH, non-condensing.

Output Signals:

4 to 20 mA, 0 to 5 VDC, 0 to 10 VDC.

Response Time (90%):

10 s, typical.

Zero & Span Adjustments:

Digital push buttons.

Output Load Resistance:

Current output: 0 to 1100 Ω max.; Voltage output: Minimum load resistance 1 kΩ.

Current Consumption:

60 mA max.

Display:

5 digit LCD (optional).

Electrical Connections:

Analog; power and output: four wire removable European style terminal block for 16 to 26 AWG.

Communication:

Connections: BACnet MS/TP or Modbus® RTU/ASCII: three wire removable European style terminal block for 16 to 26 AWG; Supported baud rates: 9600, 19200, 38400, 57600, 76800, 115200. (optional)

Device Load:

1/8th unit load.

Electrical Entry:

1/2" NPS thread. Accessory: Cable glａnd for 5 to 10 mm diameter cable, A-151.

Enclosure Rating:

NEMA 4X (IP66).

Mounting Orientation:

Flow direction must be parallel to the sensor tip.

Weight:

6.0 oz (160 g).

Agency Approval:

BTL, CE.