當前位置：廣州綠測電子科技有限公司>>功率電子及安規測試>>XHR 1KW半機架寬臺式直流電源

XHR 1KW半機架寬臺式直流電源

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地廣州市

在線詢價收藏產品

聯系方式：經理查看聯系方式

更新時間：2022-12-05 13:01:36瀏覽次數：257次

聯系我時，請告知來自儀表網

產品分類 品牌分類

  功率電子及安規測試

全部產品列表

暫無信息

廣州綠測電子科技有限公司

經營模式：其他

商鋪產品：1985條

所在地區：

聯系人：經理

詢價 給他留言

產品簡介

XHR 1KW半機架寬臺式直流電源

詳細介紹

Sorensen XHR 系列

XHR 系列是緊湊型直流電源。半機架尺寸可輸出 1000 W 功率。該系列產品有 18 個 1 kW 的型號可供選擇。其機型小巧、功能，對于需要高功率和寬輸出電壓或電流調節范圍的 OEM 應用是理想的選擇。其半機架的寬度有利于配置。

XHR 可堆疊，占用面積小，帶前面板接線柱，電流需求低，可插入標準的 120 VAC，15 A 線路。其采用零電壓“軟開關”技術，消除了開關切換瞬變效應，達到高效率、低噪聲和高可靠性的優點。XHR 可對低電流耗（僅11A 20 VAC/1000 W）進行功率因數校正，并減少輸入電流諧波的產生。

半機架寬的 XHR 非常適合在測試系統設備控制臺中與另一個半機架儀器“搭配”，無需空面板，同時不會占用垂直機架空間。XHR 提供后面板和/或前面板連接器，可輕松、靈活地集成到系統中。

主要特點

85~250 VAC 通用輸入
待機模式
自動切換恒壓或恒流模式并帶操作模式指示
模擬編程
LabView® 和 LabWindows® 驅動程序
CE、CSA、UL 認證

Sorensen XHR 系列規格

Common
Switching Frequency	7.5 V to 300 V models: nominal 125 kHz (250 kHz output ripple); 600 V model: nominal 62.5 kHz (125 kHz output ripple)
Time Delay	4 sec maximum from power on until output stable
Voltage Mode Transient Response Time	1 ms for output voltage to recover within 0.5% of its previous level after a step change in load current of up to 50% of rated output
Maximum Voltage Differential	±600 Vdc from output to safety ground
Remote Start/Stop and Interlock	2.5-15 V signal or TTL-compatible input, selectable logic
Remote Analog Programming	Voltage and current programming inputs (source must be isolated): 0-5 k, 0-10 k resistances; 0-5 V (default), 0-10 V voltage sources
Remote Analog Monitoring	Voltage and current monitor outputs 0-5 V (default), 0-10 V ranges for 0-99% of output
Remote Programming & Monitoring Accuracy	1% zero to full scale output for the default range
Front Panel Voltage and Current Control	10-turn voltage and current potentiometers
Front Panel Voltage Control Resolution	0.02% of maximum voltage
Main Output Connector	7.5 to 40 V models: nickel-plated copper bus bars; 60 to 600 V models: 4-terminal wire clamp connector for DC output and local sense
Protection Features	Over-voltage protection and Over-temperature protection
Approvals	CE-marked units meet: EN61010-1, EN61000-6-2 and EN61000-6-4; CSA C/US certified to UL61010-1B and CSA C22.2 No 1010.1; Meets USA EMC standard: FCC, part 15B, Class A; Meets Canadian EMC standard: ICES-001, Class A.

Environmental
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 85°C
Humidity Range	Up to 80% RH, non-condensing

Physical
Dimensions	Width: 8.5” (216 mm) Height: 3.4” (86.4 mm) Depth: 18.6” (472.2 mm)
Weight	Approximately 14 lbs. ( 6.4 kg )

Input
Voltage Ranges	85-250 VAC, 47-63 Hz, power factor corrected. Derate maximum output power to 900 W for AC input less than 95 V
Power Factor	99 minimum for full load and 120 Vac input
Current	13 A maximum at 100 Vac; 11 A maximum at 120 Vac; 6 A maximum at 220 Vac
AC Input Connector Type	IEC 320 connector

Output
Model	Output Voltage	Output Current	Output Power
XHR 7.5-130	0-7.5 V	0-130 C	975 W
XHR 20-50	0-20 V	0-50 C	1000 W
XHR 33-33	0-33 V	0-33 C	1089 W
XHR 40-25	0-40 V	0-25 C	1000 W
XHR 60-18	0-60 V	0-18 C	1080 W
XHR 100-10	0-100 V	0-10 C	1000 W
XHR 150-7	0-150 V	0-7 C	1050 W
XHR 300-3.5	0-300 V	0-3.5 C	1050 W
XHR 600-1.7	0-600 V	0-1.7 C	1050 W

Output : At the front panel posts
Model	Output Ratings
Model	Voltage (VDC)	Current (ADC)
XHR 7.5-130	0-7.5	0-130
XHR 20-50	0-20	0-50
XHR 33-33	0-33	0-33
XHR 40-25	0-40	0-25
XHR 60-18	0-60	0-18
XHR 100-10	0-100	0-10
XHR 150-7	0-150	0-7
XHR 300-3.5	0-300	0-3.5
XHR 600-1.7	0-600	0-1.7

Output
Model	Line Regulation (2)		Load Regulation (3)
Model	Voltage	Current	Voltage	Current
XHR 7.5-130	3 mV	14 mA	3 mV	66 mA
XHR 20-50	4 mV	6 mA	4 mV	26 mA
XHR 33-33	5 mV	4.3 mA	5 mV	18 mA
XHR 40-25	8 mV	3.5 mA	6 mV	14 mA
XHR 60-18	8 mV	2.8 mA	8 mV	10 mA
XHR 100-10	12 mV	2 mA	12 mV	6 mA
XHR 150-7	17 mV	1.7 mA	17 mV	4.5 mA
XHR 300-3.5	32 mV	1.3 mA	32 mV	3 mA
XHR 600-1.7	62 mV	1.2 mA	62 mV	2 mA

Output
Model	Meter Accuracy		Output Noise (0-20 MHz) Voltage (p-p)	Output Ripple (rms) Voltage
Model	Voltage (0.5% to 1% of Vmax + 1 count)	Current (0.5% of Imax + 1 count)	Output Noise (0-20 MHz) Voltage (p-p)	Output Ripple (rms) Voltage
XHR 7.5-130	0.09 V	1.4 A	70 mV	10 mV
XHR 20-50	0.3 V	0.6 A	70 mV	10 mV
XHR 33-33	0.43 V	0.43 A	75 mV	7.5 mV
XHR 40-25	0.5 V	0.35 A	75 mV	7.5 mV
XHR 60-18	0.7 V	0.19 A	75 mV	10 mV
XHR 100-10	1.1 V	0.11 A	100 mV	10 mV
XHR 150-7	1.6 V	0.08 A	150 mV	20 mV
XHR 300-3.5	4 V	0.05 A	250 mV	30 mV
XHR 600-1.7	7 V	0.03 A	500 mV	120 mV

Output
Model	Load Regulation (3)		Meter Accuracy
Model	Voltage	Current	Voltage (0.5% to 1% of Vmax + 1 count)	Current (0.5% of Imax + 1 count)
XHR 7.5-130	3 mV	66 mA	0.09 V	1.4 A
XHR 20-50	4 mV	26 mA	0.3 V	0.6 A
XHR 33-33	5 mV	18 mA	0.43 V	0.43 A
XHR 40-25	6 mV	14 mA	0.5 V	0.35 A
XHR 60-18	8 mV	10 mA	0.7 V	0.19 A
XHR 100-10	12 mV	6 mA	1.1 V	0.11 A
XHR 150-7	17 mV	4.5 mA	1.6 V	0.08 A
XHR 300-3.5	32 mV	3 mA	4 V	0.05 A
XHR 600-1.7	62 mV	2 mA	7 V	0.03 A

Output
Model	Output Noise (0-20 MHz) Voltage (p-p)	Output Ripple (rms) Voltage	Drift (8 hours) (4)
Model	Output Noise (0-20 MHz) Voltage (p-p)	Output Ripple (rms) Voltage	Voltage (0.05% of Vmax)	Current (0.1% of Imax)
XHR 7.5-130	70 mV	10 mV	3.75 mV	130 mA
XHR 20-50	70 mV	10 mV	10 mV	50 mA
XHR 33-33	75 mV	7.5 mV	16.5 mV	33 mA
XHR 40-25	75 mV	7.5 mV	20 mV	25 mA
XHR 60-18	75 mV	10 mV	20 mV	18 mA
XHR 100-10	100 mV	10 mV	50 mV	10 mA
XHR 150-7	150 mV	20 mV	75 mV	7 mA
XHR 300-3.5	250 mV	30 mV	150 mV	3.5 mA
XHR 600-1.7	500 mV	120 mV	300 mV	1.7 mA

Output
Model	Temperature Coefficient (5)		Maximum Remote Sense Line Drop Compensation 6	OVP Adjustment Range (5%to 110% of Vmax)	Efficiency (7)
Model	Voltage (0.02% of Vmax/°C)	Current (0.03% of Imax/°C)	Maximum Remote Sense Line Drop Compensation 6	OVP Adjustment Range (5%to 110% of Vmax)	Efficiency (7)
XHR 7.5-130	1.5 mV	39 mA	3 V / line	0.375-8.25 V	81%
XHR 20-50	4 mV	15 mA	5 V / line	1-22 V	83%
XHR 33-33	6.6 mV	9.9 mA	5 V / line	1.65-36.3 V	83%
XHR 40-25	8 mV	7.5 mA	5 V / line	2-44 V	83%
XHR 60-18	12 mV	5.4 mA	5 V / line	3-66 V	84%
XHR 100-10	20 mV	3 mA	5 V / line	5-110 V	84%
XHR 150-7	30 mV	2.1 mA	5 V / line	7.5-165 V	85%
XHR 300-3.5	60 mV	1.1 mA	5 V / line	15-330 V	85%
XHR 600-1.7	120 mV	0.48 mA	5 V / line	30-660 V	85%
Specifications subject to change without notice. 1. Specifications indicate typical performance at 25°C ± 5°C, nominal line input of 120 Vac. 3. For 0-99% load variation, with constant nominal line voltage. Measured at the rear panel output connector unless stated otherwise. 4. Maximum drift over 8 hours with constant line, load, and temperature, after 30-minute warm-up. 5. Change in output per °C change in ambient temperature, with constant line and load. 6. Line drop is subtracted from total voltage available at supply output. 7. Typical efficiency at 115 Vac input and rated output power. 8. Apply accuracy specifications according to the following voltage program accuracy example: Set a model 20-50 power supply to 10 V. The expected result will be within the range of 10 V ± 75 mV ± 0.12% of the set voltage of 10 V.