英國易高Elcometer506附著力測試儀
The Elcometer 506 are lightweight, portable and easy-to-use adhesion gauges are available in analogue or digital versions and are suitable for measuring the pull-off adhesion of coatings up to 50MPa (7250psi) either on-site, or in the laboratory.
英國易高Elcometer506附著力測試儀
The design of the Elcometer 506 ensures that a uniform force can be easily applied throughout the range by smoothly rotating the gauge's crank handle, ensuring repeatable results to an accuracy of ±1%.
The Elcometer 506 quick connect coupling allows the simple attachment of 14.2mm, 20mm or 50mm diameter dollies which, together with a wide range of accessories, allows coating adhesion testing on flat, curved, thick and thin substrates - including metal, wood, concrete and other fibrous materials.
英國易高Elcometer506附著力測試儀
The Elcometer 506 test head (actuator) has been designed to be small, ergonomic and lightweight – ideal for single handed testing of coating adhesion even in awkward or confined spaces.
Safe testing on vertical surfaces has also been considered. Using the magnetic clamp accessory the actuator is held securely - preventing accidental damage to the surrounding areas.
Powerful
•Suitable for use on metal, wood, concrete and other substrates
•Rugged & lightweight - ideal for frequent testing
•Smooth load application up to 50 MPa (7250 psi)
Flexible
•Easy to use hand-held design
•Ideal for laboratory and field use
•14.2, 20 and 50 mm (0.56, 0.76 & 1.96”) diameter reusable dollies
•Measures on small, curved and flat surfaces
Accurate
•Measurement range up to 50 MPa (7250 psi) with an accuracy of ±1% of full scale
Durable
•Sealed, heavy duty and impact resistant
•Dust and waterproof equivalent to IP65
•Suitable for use in harsh environments
Testing coatings on concrete & low bond strength substrates
When testing coatings on low bond strength substrates such as concrete, wood or other fibrous materials, a larger surface area of dolly is required to improve accuracy, repeatability and reproducability.
The Elcometer 506 Concrete Adhesion Tester can be supplied as a kit or with individual 50mm accessory items (skirt, dolly, cutter) which can be added to existing Elcometer 506 gauges.
How to Prevent Adhesive and Cohesive Failures
Correct dolly position
Dolly and Actuator
Coating
Substrate
Incorrect dolly position
Preparing the surface and dolly
1. Select an appropriate test area which is flat and has sufficient test area to attach the adhesion gauge.
2. Abrade the dolly and surface, clean both to remove any dust - minimising the risk of an ‘adhesive’ failure.
岳普湖县|
广德县|
盐亭县|
金乡县|
永安市|
平和县|
嵊泗县|
岳西县|
开原市|
观塘区|
贡嘎县|
英德市|
昔阳县|
陆河县|
且末县|
北票市|
陆良县|
额尔古纳市|
福贡县|
台前县|
图木舒克市|
图木舒克市|
华安县|
凤阳县|
万年县|
登封市|
偃师市|
五河县|
宿松县|
朝阳市|
乌鲁木齐县|
中卫市|
海南省|
溆浦县|
龙岩市|
锦州市|
久治县|
德保县|
诸暨市|
桃园县|
栾川县|