(1) Unify the display sectiona frame. It became stronger. (2) Display Measurement Mode, Unit, Etc. on Display Section. (3) Data Output is USB Form. (4) Prepare each button in accordance with operation. Button operation became simple
*The torque screwdriver is Ergonomiclight weight, yet ruggedly constructed *Available in: lb-in, kg-cmN-m *Peak, Real TimePeak Down measuring mode (selectable) *800 data memory. *Programmable HighLow set points with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing *Programmable screw tightening counter *Programmable Auto Zero function resets unit to zero for easy operation *Both CWCCW operation *ASCII format output(USB) *Runs on internal NiCad batteries (for 12 hours) Auto shut-off after 10 min. of non-use * AC chargercarrying case included.
NEW丂DEVELOPMENT Wrench head awivels 300亱
Specification
DIW-15
DIW-20
DIW-75
DIW-120
Measuring range N丒m (at the time of Track)
0.20 - 15 N
0.20 - 20 N
0.20 - 75 N丒m
2.0 - 120 N丒m
2.0乣150 kgf丒cm
2.0乣200 kgf丒cm
2.0乣750 kgf丒cm
20乣1200 kgf丒cm
2.0乣130 lbf丒in
2.0乣180 lbf丒in
2.0乣650 lbf丒in
20乣1040 lbf丒in
Accuracy
亇0.5% (F/S) (199 or less digit亇1digit)
亇0.5% (F/S) (499 or less digit亇3digit)
亇0.5% (F/S) (199 or less digit亇1digit乯
Display
The 4 figures digital display of LCD
The measurement direction
CW-CCW (rightleft)
Measuring mode
P-P Peak
Holding Peak Load Value
T-R Track
Showing Real time torque value ( Used for Zero-Adjustment )
P-D Peak down
Holding Load Value at the moment to change from upward to downword
C Real-time output
Load torque value is outputted every about1/ 160 second
Decision function
Setting of torque value
Programmable HighLow setpoints with both audible beepGreen/ Red LED indicator for uniform torque tightening or GO/NO GO testing
The Maximum, the minimum,the average value
Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Data spec.
Data transfer
ASCII format (Baud rate : 19200)
Data memory
800 data / ten channels data
A setup of the number of counts
One to 99 count (count in a direction with a bundle)
Auto power save
10 minutes no use, automatically switch off.
Charging time
From empty - less than 5hours
Continunous working time
12 hours
Outside size
冇34(grip)亊236(L)
冇34(grip)亊235(L)
冇34(grip)亊320(L)
冇34(grip)亊445(L)
Weight (about)
430g
470g
620g
830g
Socket engagement
6.35 square, including steel ball
9.5 square, including steel ball
12.7 square, including steel ball
Attachment
-
One-way socket
Accessories (one piece each)
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure