The minimum control pressure of the normaly closed actuator is 0.4Mpa. When the medium pressure is higher than the control pressure and the control pressure is only 0.4 Mpa, the valve will not open. In this case, use a large head and increase the actuator to 80. And 100, nomallyopen type, under the installation of the waterproof hammer, the medium pressure is higher than the control pressure of the actuator, you need to use a large head to increase the actuator. For specic unconventionalinstallation, contact us to select the model according to the actual pipeline medium pressure, temperature and pressure control.
According to user requirements can be equipped with accessories: solenoid valve, limit switch, pressure reducing valve filer, proximity switch, signal feedback, positioner, etc., al specifications can be customized according to user use, if necessary, can send professionals, site design and installation.
The angle seat valve maintains the flow rate and saves space. The pilot angle seat valve operated by a spring-actuated single-acting actuator mechanism can be widely used in short-time and frequent start-up. Pneumatic control can accurately control the fow of gas and iquid, and can achieve accurate temperature control, drop iquid addition and other requirements. Warm sterilization uses angle seat valve to control steam volume to accurately control temperature.