DWYER 一氧化碳傳感器開關 CMS300
The Model CMS300 Carbon Monoxide Transmitter and Switch provides a field selectable current or voltage output that is proportional to the carbon monoxide concentration in underground parking garages, vehicle maintenance facilities, or mechanical rooms. An integral relay can be used for alarm conditions and is configured with preset jumper selectable ranges of 25, 60, or 150 PPM. Field calibration can be done by using Model GCK-200CO-2000CO2 calibration gas, Model A-507 calibration adapter, and the on board zero and span potentiometers
Sensor:Electrochemical, 5 years typical lifespan.
Range:0-300 PPM.
Output Drift:<5% per year in air.
Temperature Effect:±2% over range.
Coverage Area:7,500 ft² (700 m²) or 50 ft (15 m) radius.
Accuracy:±5 PPM or 5% of reading for 0-300 PPM (whichever is greater).
Resolution:1 PPM.
Temperature Range:-4 to 122°F (-20 to 50°C).
Storage Temperature:For best sensor life, 32°F to 68°F (0 to 20°C).
Humidity Range:15-90% RH constant; 0-99% RH intermittent.
Response Time:<45 seconds to 90% of final value
Calibration:15 turn span and zero adjustment potentiometers.
Housing:UV resistant glass filledpolycarbonate.
Analog Output:Jumper selectable 4 to 20 mA (loop powered) or 2 to 10 V (maximum load 2K Ω).
Enclosure Rating:IP64.
Weight:1 lb (0.45 kg).
Switch Type:Single-pole double-throw (SPDT).
Electrical Rating:30 VAC/VDC. N/O = 5 A; N/C = 3 A
Set Point:Jumper selectable 25, 60, or 150 PPM.
Set Point Differential/Hysteresis:3% of scale.
Relay Action:Factory set for direct acting.
Agency Approvals:Sensor is UL recognized component for ANSI/UL-2034, UL-2075, E340403, CE.
| Model | Description |
| CMS300 | Carbon monoxide transmitter & switch, 0-300 PPM, 4-20 mA/2-10 V (maximum load 2K Ω) |
DWYER 一氧化碳傳感器開關 CMS300
额济纳旗|
汶上县|
米易县|
克什克腾旗|
壶关县|
偏关县|
枝江市|
垣曲县|
云梦县|
屯留县|
吐鲁番市|
涟水县|
靖安县|
佛山市|
大化|
酉阳|
海原县|
晋城|
朔州市|
建水县|
富川|
广丰县|
凌云县|
岐山县|
淳化县|
库尔勒市|
威宁|
长沙县|
白城市|
云南省|
平凉市|
湖南省|
大埔区|
团风县|
葵青区|
微博|
沙雅县|
马边|
六枝特区|
山东|
安化县|