First, the impact concrete shaker is a screening instrument, which is suitable for the screening and analysis of materials in the laboratories of highways, construction, geological and metallurgical research departments, etc. It is convenient and simple to complete the separation when the machine is turned on for 5 minutes. *jobs.
二、ZBSX-92A頂擊式混凝土震篩機技術參數:
★篩子直徑:300mm-200mm
★篩子疊高:440mm
★篩座震幅:8mm
★篩搖動次數:221次/分
★震擊次數;147次/分
★回轉半徑:12.5毫米
★電機功率:0.37千瓦
★電機轉速:1400次/分
★外形尺寸:(長*寬*高) 600*400*800毫米
★總重量:120kg
Second, the technical parameters of impact concrete shaker:
Third, the operating rules of the impact concrete shaker:
Before turning on the machine, unscrew the upper bolts and add enough oil. It is advisable to use 5 kg of 20 # ordinary engine oil. When installing the sieve, first turn the button bolts to the left to loosen the function of the sieve cover. Then lift it up with the sieve cover, and then turn it right to fix it You can set the sieve and the sieve tray, and then loosen the tightening bolts left and right to press down and turn it right to fix it to work. The knob can be turned to the normally open position. If you need to work regularly, you can turn the knob to the required timing position. If you need to stop it on the way, you should turn off the power switch and let the fixed clock turn to the stop position by itself. The machine is easy to maintain. Change the oil every 6 months. When using it, pay attention to avoid deformation of the 7 guide bars on the cover.
Fourth, the maintenance of top impact concrete shaker:
1. Connect the motor cable plug to the socket of the program controller and the power cable plug to the three-phase cable socket.
2. Press the power switch, the display lights up and appears for 300 seconds.
3. Set time:
a) According to the needs of the user, press the light touch key △ to increase, press ▽ to decrease, each press △ ▽ is 60 seconds.
b) Set the required time according to the test regulations. Press the ON button to start the machine. The indicator light will turn on during operation.
c) When the instrument is working normally, you need to stop and press the OFF keypad.
d) The time should be reset after each shutdown.
e) Caution: Do not turn on or off the machine frequently during use, and cut off the power after stopping
Fifth, the working principle of the impact concrete shaker:
This machine is mainly composed of transmission, swing, shock, clamping mechanism and electrical appliances. This machine is driven by the motor through the main shaft and the transmission shaft to drive the gear, and the worm gear to drive the cam. The main eccentric shaft drives the two auxiliary eccentric shafts, so that the screen seat has the dual motions of rotation and shock.
Installation and commissioning of impact concrete shaker:
It can be placed directly on the concrete floor without the use of a cement foundation, or it can be installed on the cement foundation. The height and size of the foundation exposed on the ground or level with the ground, according to the specific needs of use, install the circuit and ground according to the electrical regulations, after the installation is completed, the direction of rotation of the motor is the same as the arrow, there is shock motion, if the opposite The motor is running dry. At this time, you can change the terminal to start normally.