上海榮計達實驗儀器有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質生產商
所 在 地
聯系方式:王林查看聯系方式
更新時間:2021-07-24 10:36:13瀏覽次數:155次
聯系我時,請告知來自 儀表網一、水泥快速養護箱產品簡介:水泥快速養護箱是的水泥快速養護室設備,水泥快速養護箱是我公司依據行業標準T0509-94《水泥膠砂強度快速試驗》設計制造
一、水泥快速養護箱產品簡介:
水泥快速養護箱是 的水泥快速養護室設備, 水泥快速養護箱是我公司依據行業標準T0509-94《水泥膠砂強度快速試驗》設計制造。水泥快速養護箱適用于水泥廠、建筑施工、科研等單位對普通硅酸鹽水泥,礦渣水泥,火山灰水泥、粉煤灰水泥的試塊進行快速養護。適用于水泥廠,建筑科研施工單位對所有混凝土試件進行快速恒溫養護,可在24小時內預測出3天、7天、23天齡期的抗壓、抗折試驗結果,縮短水泥檢驗周期。
Product introduction of cement quick curing box:
The cement quick curing box is the fastest cement curing room equipment. The cement quick curing box is designed and manufactured by our company in accordance with the industry standard T0509-94 "Quick Test of Cement Sand Strength". The rapid cement curing box is suitable for cement plant, building construction, scientific research and other units for rapid curing of ordinary portland cement, slag cement, pozzolanic cement, and fly ash cement. It is suitable for cement plants, and the construction scientific research and construction units conduct rapid and constant temperature curing of all concrete specimens, and can predict the compression, flexural test results of 3 days, 7 days, and 23 days within 24 hours, shortening the cement inspection cycle.
二、水泥快速養護箱技術參數:
★溫控范圍:室溫0-100℃
★時間控制:0.5-24小時
★加熱功率:1000W/220V
★內箱尺寸:B型:550mm×350mm×320mm
★重量:65kg
Second, the technical parameters of the rapid cement curing box:
★ Temperature control range: room temperature 0-100 ℃
★ Time control: 0.5-24 hours
★ Heating power: 1000W / 220V
★ Inner box size: Type B: 550mm × 350mm × 320mm
★ Weight: 65kg
三、水泥快速養護箱使用方法:
★箱體安放平穩后, 先檢查電器部分有無原件損壞,線路是否接觸良好,插好傳感器和加熱器插頭。設備必須有可靠接地。
★開箱加水高約60mm。試塊成型后,常溫存放7小時或標養3小時,觀察接近終凝時,(根據水泥成分不同,應自行注意觀察,接近終凝時間)隨同試模一起放入箱內擱架上。
★ 蓋好箱蓋,插好溫度傳感器,根據各廠水泥成分不同,設定溫度和工作時間。
★ 試驗結束,取出試模放置常溫處,到試塊恢復常溫時,拆開試模,取出試塊,即可進行抗折、抗壓試驗。
★試驗結束后,放水并擦干內箱。
★ 根據水泥種類不同,可采用恒溫65-80℃之間進行,標準與快速對比試驗10-20次,找出比值或差值,得出標準檢驗結果
Third, the use of cement rapid curing box:
★ After the cabinet is installed smoothly, first check the electrical parts for damage to the original parts and whether the lines are in good contact. Plug the sensor and heater plugs. The equipment must be reliably grounded.
★ Unpacking and adding water is about 60mm high. After the test block is formed, it is stored for 7 hours at room temperature or 3 hours at standard temperature. When it is observed to be near the final setting, (depending on the composition of the cement, you should pay attention to it and approach the final setting time) and put it on the shelf in the box together with the test mold.
★ Cover the box, insert the temperature sensor, and set the temperature and working time according to the cement composition of each plant.
★ After the test, remove the test mold and place it at normal temperature. When the test block returns to normal temperature, disassemble the test mold and remove the test block to perform the flexural and compressive test.
★ After the test, drain the water and dry the inner box.
★ Depending on the type of cement, a constant temperature of 65-80 ° C can be used. The standard and rapid comparison tests are performed 10-20 times to find the ratio or difference and obtain the standard inspection result.
四、水泥快速養護箱結構:
箱體由內、外箱體和保溫層組成。內外箱均采用優質不銹鋼焊接成型。內外層之間填充有優質保溫層。箱體與箱蓋之間采用水槽密封。
Fourth, the structure of cement rapid curing box:
The box body is composed of an inner box and an outer box and an insulation layer. The inner and outer boxes are welded with high-quality stainless steel. The inner and outer layers are filled with a high-quality insulation layer. A water tank seal is used between the box body and the box cover.
五、水泥快速養護箱裝箱單:
1、主機: 1臺
2說明書合格證:1本
V. Packing list of cement quick curing box:
1. Host: 1
2 instruction certificate: 1
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
商 鋪:上海榮計達實驗儀器有限公司 http://m.liuyangwu.com/st27906/
主營產品:砂漿標準養護箱,砂漿拉力試驗機,瀝青軟化點儀,瀝青標準延度儀,
移動端:上海榮計達實驗儀器有限公司手機站
儀表網 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
號碼可能有誤,請核對!
請選擇省份
聯系方式
上海榮計達實驗儀器有限公司
朝阳区|
防城港市|
湛江市|
罗平县|
黎川县|
永靖县|
高尔夫|
南充市|
宁国市|
郓城县|
太保市|
奉节县|
抚顺市|
荆门市|
翼城县|
桂林市|
黑河市|
凌源市|
肃宁县|
东兴市|
罗甸县|
栾城县|
扶沟县|
安平县|
平山县|
太康县|
信阳市|
伽师县|
湟中县|
桂阳县|
连城县|
南安市|
怀柔区|
湘阴县|
凤凰县|
从化市|
安徽省|
武川县|
洛浦县|
武宁县|
上高县|
