安科瑞 鐵塔差異化配電 通信基站直流6回路電能表 AMC16-DETT

AMC16-DETT 基站直流電能計量模塊主要是針對有共享需求，且開關電源無分用戶電量計量功能的基站而設計的。儀表可對六個回路的直流電能進行計量，并可為配套的霍爾傳感器提供工作電流，同時可通過上位機軟件實現零漂校準，具有遙測、遙信、遙調、實時電量計量、供電質量異常告警、信息存儲及處理、信息交互等功能。

      該模塊可分別計量三家運營商的直流用電量，為基站節能改善提供詳細的數據依據，為直流配電設備提供分項計量解決方案。模塊具有工業標準的 RS485 通訊接口,采用 YD/T1363.3-2014 規定的通訊協議，符合中國鐵塔有限公司 Q/ZTT 2205-2017《基站直流電能計量模塊技術要求》相關技術要求。

2020年5G元年，我國通信行業呈蓬勃發展之態，各大運營商和鐵塔集團在布局新一代通訊基站。基站用電量不斷上升，通信基站智能化電力監控及節能管理已成為各運營商企業的研究方向。

運營商基站共用可降低社會投資資本，但能耗計量問題困擾各大運營商，通過多回路智能電表對基站內的交流、直流設備進行檢測和管理，并通過本地監控單元FSU將數據上傳到區域監控中心LSC，*終傳輸至集中監控中心CSC監控平臺，保障基站的可靠運營。

安科瑞  時麗花 18706162823

In the first year of 5G in 2020, our country's communications industry is undergoing vigorous development, and major operators and tower groups are deploying a new generation of communications base stations. With the rising of  power consumption, the operators have made research on intelligent power monitoring and energy-saving management of base stations.

Operator base station sharing can reduce social investment capital, but the energy consumption problem plagues major operators. The multi-circuit energy meters can measure AC and DC equipment in the base stations and the data is uploaded to the LSC through FSU. Then, it is transmitted to the CSC monitoring platform to ensure the reliable operation of the base station.

基站動環監控系統

Base station dynamic environment monitoring system

基站動力配套示意圖

基站供電系統由交流供電和直流供電系統組成。交流供電系統：由一路市電電源、一路移動油機電源、浪涌保護器、交流配電箱（具備市電油機切換功能）組成。直流供電系統：由開關電源、蓄電池組成。

Schematic diagram of base station power supply

The base station power supply system consists of AC and DC power supply systems. AC power supply system consists of one channel mains power supply, one channel  oil machine power supply, surge protector and AC distribution box. DC power supply system consists of switching power supply and storage battery.

基站內的開關電源、空調、照明以及插座等都由交流配電箱進行供電，并通過多回路交流儀表實現高精度分項計量，而基站內各類通信設備主要是由直流系統進行供電，利用基站直流電能計量模塊對不同運營商的通信設備實現能耗監測，*終通過FSU設備接至動環監控平臺，實現對通信基站的能耗監測及管理。

The switching power supply, air-conditioning, lighting and sockets in the base station are all powered by the AC distribution box, and high-precision sub-metering is achieved through multi-circuit AC meters. The various communication equipment in the base station is mainly powered by DC system and the base station DC energy meter can realize energy consumption monitoring of them, and finally connects to the dynamic monitoring platform through FSU.

交流多回路儀表

AC Multi-circuit Energy Meter

安科瑞  時麗花  18706162823

直流多回路儀表

DC Multi-circuit Energy Meter

安科瑞 時麗花  18706162823