當前位置：長春市海洋光電有限公司>>>>1525-1565nm C波段拉曼放大器機架式

1525-1565nm C波段拉曼放大器機架式

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質代理商

所在地長春市

在線詢價 收藏產品

聯系方式：韓思雨查看聯系方式

更新時間：2023-11-22 10:17:16瀏覽次數：129次

聯系我時，請告知來自儀表網

產品分類 品牌分類

暫無信息

長春市海洋光電有限公司

經營模式：代理商

商鋪產品：789條

所在地區：吉林長春市

聯系人：韓思雨（銷售經理）

詢價 給他留言

產品簡介

1525-1565nm C波段拉曼放大器機架式

詳細介紹

1525-1565nm C波段拉曼放大器機架式

　　詳細內容

　　產 品說明

　　1525-1565nm C波段拉曼放大器機架式

　　RA series Raman Amplifiers are optical fiber amplifier that designed to recover optical loss incurred in optical fiber and thus extending the transmission distance. RA series is designed to amplify optical signals in ultra long-haul DWDM networks. RA can also be incorporated into HFC/CATV networks to increase the transmission range of analog and digital channels.

　　Unlike EDFAs, Raman amplifiers are based on Scattering Raman Amplification which uses the single mode optical fiber in the link itself as the amplification medium. RA series Raman Amplifiers are typically installed in the mid-stream of signal or placed before receivers to increase the optical power level signals. Utilizing an high-power, multiple pump lasers design, RA series provide very broad operating wavelength range, constant optical gain, and effectively reduce noise figures in the link.

　　It is an ideal solution for extending the transmission range of 10G/40G DWDM networks without the installation of costly repeater. By using a combination of EDFA and RA, HFC/CATV networks operator can extend the transmission distance of analog channels and QAM digitals signal up to 250km.

　　RA series Raman Amplifiers are constructed with Telcordia-qualified components to ensure 15+ years of continuous operating life. They are backed by our standard 3 year limited product warranty. Our technical team provide in-house technical support for networks installation.

　　Features:

　　- Support up to 80 DWDM channels at 10G/40G transmission link

　　- Extend QAM digital and analog channels in HFC/CATV transport

　　- Gain up to 13dB

　　- Effective Noise Figure of -1.3 dB

　　Technical Specifications

Model Number	RA-C
Operating Wavelength Range	1525 to 1565nm
Signal Gain Average	11-13dB
Gain Flatness	± 0.75dB
Pumper Laser	4
Pump Power Total	700mW
Signal Insertion Loss	1.0dB Typical (with input fiber spliced)
Input Signal Level	-40 to +5dB per channel
Effective Noise Figure	-1.3dB Typical
Polarization Mode Dispersion (PMD)	0.2ps Max.
Polarization Dependent Gain (PDG)	0.2dB Max.
Power Stability	± 1.0dB over 8 hours
Mechanical Specifications
Operation Temperature	0°C to 50°C
Storage Temperature	-10°C to 70°C
Power Supply	80-240V, 43-63Hz AC
Power Consumption	80W Max.
Housing Dimensions	2RU: 19″x14″x3.5″
Control/Monitoring	Pump Laser Temperature & Current
Display	Output Power Level, TEC Temperature
Alarm	Over Temperature, Over Current
Protection	Loss of input signal automatically disable pump lasers
Computer Interface	Ethernet for SNMP interface Optional
Optical Input Port	Bare fiber, SMF-28 with 3mm Standard
Optical Output Port	SC/APC Standard, FC/APC, LC/APC Optional