當前位置：福州精科儀器儀表有限公司>>分析儀器，前處理儀器>>Milli-Q® Reference Water Purification System超純水系統

Milli-Q® Reference Water Purification System超純水系統

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質經銷商

所在地

在線詢價收藏產品

聯系方式：張秀萍查看聯系方式

更新時間：2022-05-04 19:24:05瀏覽次數：100次

聯系我時，請告知來自儀表網

產品分類 品牌分類

  分析儀器，前處理儀器

全部產品列表

暫無信息

福州精科儀器儀表有限公司

經營模式：經銷商

商鋪產品：291條

所在地區：福建福州市

聯系人：張秀萍（電子商務）

詢價 給他留言

產品簡介

OverviewMilli-Q®ReferencedeliversType1watercustomizedtofitabroadrangeofresearchareasandmakesultrapurewaterconvenientlyavailableinanylaboratory

詳細介紹

Overview

Milli-Q® Reference delivers Type 1 water customized to fit a broad range of research areas and makes ultrapure water conveniently available in any laboratory. It is designed to be fed from a pretreated water source.

Milli-Q® water ? Optimized purification

To obtain Milli-Q® ultrapure water quality, the purification sequence has been fully optimized. Water is processed through Q-Gard® and Quantum® purification cartridges to reach a resistivity of 18.2 MΩ.cm (at 25°C) and a TOC value below 5 ppb. It then recirculates through a loop to the dispenser, where an Application Pak removes specific contaminants critical for your experiments. A range of purification cartridges and Application Paks is available for you to select according to your applications.

Made only for Milli-Q® systems, Jetpore® virgin ion-exchange resin is used in all Milli-Q® purification cartridges. Selected for its exceptional performance, it can capture even the most weakly charged ions due to its kinetic capabilities. Both Q-Gard® and Quantum® cartridges also incorporate RFID technology. This provides instant visibility on cartridge parameters and also ensures a safe & optimal performance of your system, giving you full traceability.

Convenience ? Simple dispensing & easy maintenance

Using the Milli-Q® Reference dispenser,

? Save time thanks to the volumetric function. It will automatically deliver the water volume that you requested.

? Effortlessly prepare solutions with the detachable, easy-to-handle dispenser. Its design has been conceived to fit the height and shape of all laboratory glassware.

Its graphic screen displays water quality and system status information to ensure your system is properly operating, providing the best working conditions for your experiments. A Quick Reference Guide located in the door of the Milli-Q® Reference system provides additional support for retrieving information. Easily replaceable cartridges, a long-lasting UV lamp coupled with timely service alerts, allows your system to run smoothly all year long.

Millitrack® e-Solutions provide enhanced data management control, remote access capabilities to the system dashboard, and long-term electronic archiving for your Milli-Q® Reference. In addition, a complete range of Services, including Validation support, is provided by certified Field Service Engineers using calibrated equipment and Qualification Workbooks.

Quality certificates

For full confidence in your Milli-Q® Reference system, it is delivered with a Certificate of Calibration for the built-in temperature and resistivity meters, and a Certificate of Conformity ensuring that it has been built and tested fully assembled following internal Standard Operating Procedures. In addition, all Milli-Q®Reference consumables are delivered with their Certificate of Quality. The manufacturing site is ISO® 9001 v.2000 and ISO® 140001 certified.

Specifications

Water Specifications

Milli-Q® Reference ultrapure water (Type 1)

Resistivity at 25 °C1	18.2 MΩ?cm
TOC2	≤ 5 ppb
Particulates (size > 0.22 µm)3	< 1 particulate/mL
Bacteria3,4	< 0.01 CFU/mL
Pyrogens (endotoxins)4	< 0.001 EU/mL
RNases4	< 1 pg/mL
DNases4	< 5 pg/mL
Flow Rate	Up to 2 L/min
1resistivity can also be displayed non-temperature-compensated as required by USP 2in the appropriate test conditions 3with Millipak® final filter 4with Biopak® polisher These values (validated with Elix® feed water) are typical and may vary depending on the nature and concentration of contaminants in the feed water.

A report on conformity of Milli-Q^® Reference water quality to Type 1 water quality as described by ASTM^®, ISO® 3696 and CLSI^® norms, and to Purified Water as described in USP and EP is available upon request.

Feed water

Feed water quality	Elix®, RiOs™, distilled or DI water with conductivity < 100 µS/cm and TOC < 50 ppb
Feed water connection	?" Gaz M
Feed water pressure *	0 - 0.3 bar
Feed water temperature	5 - 35 °C
* For pressure above 0.3 bar, a pressure regulator needs to be installed upstream of the system; for pressures between 0 and -0.2 bar, the system will operate, but product flow rate may be lower.

System Specifications

Dimensions (H x W x D)	713 x 413 x 458 mm (28.07 x 16.25 x 18.03 in)
Operating weight	19.5 kg (42.99 lb)
Dispenser Delivery Loop length	750 mm (29.52 in)
Electrical power supply cable length	290 mm (11.41 in)
Electrical power supply voltage	100 - 250 V ± 10%
Electrical power supply frequency	50 - 60 Hz ± 10%
Data Connection	Ethernet (RJ45)

Safety

The Milli-Q^® Reference system is tested by an independent and accredited company for compliance with the CE directives related to safety and electromagnetic compatibility. The report can be consulted on demand. The Milli-Q^® Reference system is built using components and practices recommended by UL and has been cUL marked. The registration can be verified on the UL web site.

關鍵詞：RFID