Features:
1 Rugged construction providing shock, dust and moisture resistance
2 Dual monitor position with automatic image orientation
3 Automatic arc calibration and ribbon fi ber identifi cation
4 Auto-start tube heater, Fonsun Technology
5 Color LCD display with anti-refl ective coating for excellent visibility in bright sunlight
6 Simultaneous battery charge and splicer operation
7 Long life battery (up to 90 splice/heat cycles per charge)
8 Detachable work table incorporated into the transit case
9 Data and video download software included; software upgrade available via the internet
10 Green friendly-RoHS & WEEE compliant
PARAMETER VALUE
Model FSM-60R12 Fusion Splicer
Applicable Fibers Single-mode (ITU-T G.652), Multimode (ITU-T G.651),
DS (ITU -T G.653), NZDS (ITU-T G.655)
Fiber Count Single, 2, 4, 5, 6, 8, 10, 12
Cladding Diameter 125um
Coating Diameter Ribbon: 0.25mm to 0.4mm, Single: 250um and 900um
Fiber Cleave Length 10mm
Typical Average
Splice Loss 0.05dB with SM, 0.02dB with MM, 0.08dB with DS, 0.08dB with NZDS; measured by cut-back method relevant to ITU-T and IEC standards
Splicing Time Typical 20 seconds with standard single-mode fiber
Arc Calibration Method Automatic, real-time by using results of previous splice when in AUTO mode; manual arc calibration function available
Splicing Modes 100 preset and user programmable modes, Fonsun Technology
Splice Loss Estimate Based upon dual camera cladding alignment data
Storage of Splice Result Last 2000 splice results stored in the internal memory
Fiber Display X or Y, or both X and Y simultaneously; front or rear monitor display options with automatic image orientation
Magnification 35X to 90X
Viewing Method Dual cameras with 4.1 inch TFT color LCD monitor with anti-reflective coating
Operating Condition 0 to 3,660m above sea level, 0 to 95% RH, and -10 to 50°C respectively.
Mechanical Proof Test 1.96 to 2.25N
Tube Heater Built-in tube heater with 30 heating modes; auto-start function
Tube Heating Time Typical 50 seconds with FP-5 sleeve, 40 seconds with FP3 (40), 35-55 seconds with Fujikura micro sleeves
Protection Sleeve Length 60mm, 40mm, Micro, Fonsun Technology
Splice/Heat Cycles
with Battery Typical 90 cycles with power save functions activated
Power Supply Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-13, 13.2V DC with BTR-08 battery
Terminals USB 1.1 (USB-B type) for PC communication, Mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater
Wind Protection Maximum wind velocity of 15m/s. (34 mph)
Dimensions 136W x 161D x 143H (mm) / 5.3W x 6.3D x 5.6H (inches)
Weight 2.1 kg (4.6 lbs) with AC adapter ADC-13; 2.5kg (5.5 lbs) with BTR-08 battery | |
淮滨县|
灌阳县|
会宁县|
凤凰县|
汾阳市|
虹口区|
德格县|
贵德县|
武山县|
霍林郭勒市|
东乡|
明溪县|
怀化市|
绍兴县|
鞍山市|
河北区|
和政县|
荥经县|
新安县|
福鼎市|
阳泉市|
白河县|
宜章县|
慈溪市|
论坛|
乐至县|
昔阳县|
乐都县|
敦化市|
山西省|
泾源县|
庆云县|
大同市|
进贤县|
仁寿县|
宣武区|
安丘市|
交口县|
咸丰县|
五大连池市|
溧水县|