沈樵综合在线,一区二区三区乱码,免费资源一区二区三区,91超碰碰,av极品一线天,日韩免费高清一区二区,国产蜜尤福利在线,嗯啊91在线观看,精品一区二三

行業產品

  • 行業產品

南京華灝樓宇科技有限公司


當前位置：南京華灝樓宇科技有限公司>>風閥驅動器系列>>江森M9203 3NM彈簧復位驅動器

江森M9203 3NM彈簧復位驅動器

返回列表頁
參  考  價面議
具體成交價以合同協議為準

產品型號

品       牌

廠商性質代理商

所  在  地

聯系方式：夏麥田查看聯系方式

更新時間：2021-08-06 10:57:12瀏覽次數：244次

聯系我時，請告知來自 儀表網

經營模式：代理商

商鋪產品：90條

所在地區：江蘇南京市

聯系人：夏麥田 （技術經理）

產品簡介

江森M92033NM彈簧復位驅動器資料下載TheM9203SeriesElectricSpringReturnActuatorsaredirect-mountactuators

詳細介紹

　　

 江森M9203 3NM彈簧復位驅動器資料下載

The M9203 Series Electric Spring Return Actuators are direct-mount actuators.

These bidirectional actuators do not require a damper linkage, and are easily installed on round shafts or square shafts using the standard shaft clamp included with the actuator.

A single M9203 Series Electric Spring Return Actuator provides 3 Nm running and spring return torque.

An integral line voltage auxiliary switch, available only on the M9203-xxB-1(Z) models, indicates end stop position, or performs switching functions within the selected rotation range.

M9203 Series Actuators provide 95° of rotation. A graduated scale from -5° to 90° and a position indicator provide visual indication of stroke. When power fails during service, the mechanical spring return system provides rated torque to the connected equipment, returning it to the home position.

The series includes the following control options:

•  ON/OFF, 24 V, 100 to 240 VAC power

•  ON/OFF and Floating Point, 24 V power

•  Proportional, 24 V power, for 0(2) to 10 VDC or 0(4) to 20 mA Control Signal

■■  3■Nm■Rated■Torque

Provides high torque in a compact package size to expａnd the range of damper applications in HVA system.

■■  Direct-Coupled■Design

Requires non crankarm or linkage and is capable of direct mounting to a shaft up to 12 mm diameter and centered on a 12 mm shaft.

■■  Reversible■Mounting

Provides either clockwise or counterclockwise operation.

■■  Electronic■Stall■Detection

Protects from overload at all angles of rotation. Power consumption is reduced in holding mode.

The actuator may be stalled anywhere in its rotation range without the need for mechanical end switches.

■■  Double-Insulated■Construction

Eliminates need for electrical ground connection for regulatory agency compliance.

■■  Microprocessor-controlled■Brushless■DC■Motor■(-AGx■and■GGx■types)

Provides constant runtime independent of torque.

■■  External■Mode■Selection■Switch■(-AGx■and■-GGx■types)

Permits control logic reversal for Floating Control (-AGx types). Permits calibration, input signal range selection and control logic reversal for Proportional Control (-GGx types).

■■  Integral■Cables■with■Colored■and■Numbered■Conductors

Simplify installation and field wiring.

■■  Optional■Integrated■Auxiliary■Switch

Provides one integrated, line-voltage-capable Single-Pole, Double-Throw (SPDT) switch with continuously adjustable switch point. Facilitates safety interfacing or signaling.

■■  Override■Control■(Proportional■Models■Only)

Supports manual control system override applications through field wiring.

■■  Manufactured■under■International■Standards■Organization■(ISO)■9001■Quality■Control■Standards■

Installation

The M9203 Series Proportional Electric Spring Return Actuators mount directly to the surface in any convenient orientation

using two No. M3.5 x 9.5 mm self drilling sheet metal screws and the anti-rotation bracket (parts included with the actuator). No additional linkages or couplers are required. Electrical

connections are color coded and identified with numbers

Clockwise (CW) Spring Return Direction – Counterclockwise (CCW) Powered Operation

For CW spring return direction, mount the actuator to the damper shaft so that Side B of the actuator is away from the damper as illustrated in Figure 2. With power applied, the actuator drives CCW from the 0° position and spring returns CW.

cable identifies the electrical connections and wiring details are included on the actuator housing.

This Spring Return Actuators can be easily installed on dampers with round shafts from 6 to 12 mm or square shafts from 6

to 8 mm using the standard shaft coupler included with the actuator. If the damper shaft extends less than 84 mm, see the Removable Coupler section for further instructions. If the

damper shaft extends less than 20 mm, install a shaft extension recommended by the damper manufacturer.

Counterclockwise (CCW) Spring Return Direction

- Clockwise (CW) Powered Operation

For CCW spring return direction, mount the actuator to the damper shaft so that Side A of the actuator is away from the damper as illustrated in Figure 1. With power applied, the actuator drives CW from the 0° position and spring returns CCW.

Removable Coupler

If the damper shaft extends less than 84 mm, mount the coupler on the face of the actuator closest to the damper.If the damper shaft extends less than 20 mm, a shaft extension is required to mount the actuator.

To change the coupler’s position, see Figure 3 and proceed as follows:

1. Mount the coupler on either Side A or Side B of the actuator as determined by the shaft length.

2. Snap the locking clip securely into the coupler retention groove to retain the coupler.

 

 


您感興趣的產品PRODUCTS YOU ARE INTERESTED IN

儀表網 設計制作，未經允許翻錄必究 .? ? ? Copyright(C)?2021 http://m.liuyangwu.com,All rights reserved.

以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，儀表網對此不承擔任何保證責任。 溫馨提示：為規避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。

會員登錄

×

請輸入賬號

請輸入密碼

=

請輸驗證碼

收藏該商鋪

請 登錄 后再收藏

提示

您的留言已提交成功！我們將在第一時間回復您~
饶平县| 浪卡子县| 平山县| 大渡口区| 阜康市| 都江堰市| 芦山县| 法库县| 环江| 平武县| 保靖县| 铁岭市| 开江县| 宁城县| 永顺县| 云安县| 宜昌市| 浪卡子县| 商南县| 永清县| 抚顺县| 长子县| 宁远县| 百色市| 镇雄县| 尉犁县| 班戈县| 白水县| 青河县| 香港| 察雅县| 阜阳市| 浦东新区| 上饶市| 台安县| 祁阳县| 日土县| 嵊州市| 通渭县| 宝丰县| 金山区|