東莞市禧隆電工機械設備有限公司
東莞市禧隆電工機械設備有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質生產商
所 在 地
聯系方式：葉麗玲查看聯系方式
更新時間：2025-07-20 11:33:23瀏覽次數：178次
聯系我時，請告知來自 儀表網暫無信息 |
廠家供應UL1581標準試料磨平機XL-8015啞鈴磨片機試料磨平機在將橡膠或塑膠啞鈴狀試片磨平、磨薄或磨出所需之厚度，以供拉力、老化、耐油等試驗之用
符合UL1581標準第420.6條規定。
Buffing machine （AUGUST 2, 2006 - UL 1581）
420.6 A power-driven buffing machine (grinding wheel) is appropriate for buffing irregularities from the ples from which die-cut specimens are to be prepared. The abrasive wheel is to be of about No. 36 grit (particle size of 0.019 inch or 0.486 mm). The wheel is to run true and is not to vibrate. The diameter of the wheel is not specified; however, 4-3/4 – 6-1/4 inch or 0.12 – 0.16 m has been found appropriate. The rotary velocity of the wheel is to be 2500 – 3500 r/min. The diameter and rotary velocity of the wheel are to be selected to give the wheel a peripheral speed (rpm×p×wheel diameter) of 3000 – 5000 ft/min or 15 – 25 m/s. CAUTION – The maximum wheel diameter stated in this paragraph and the maximum wheel rpm stated in this paragraph shall not be used together as this combination will result in a peripheral speed above 5000 ft/min or 25 m/s. This applies even for wheels that are marked as being intended for a peripheral speed above 5000 ft/min or 25 m/s. The machine is to have a slow feed that applies light pressure and removes very little material at one cut, thereby not overheating the specimen or the wheel.
主要技術參數
砂 輪：36 ? 5″
砂輪線速度：3000～5000feet/min或15～25m/s
皮帶輪加速比：2：1
體 積：50×60×40cm
重 量：50kg
電 源：1∮，AC220V 50Hz
注：以上價格有誤，僅供參考，來電更多優惠！
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
儀表網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
宿州市|
宿州市|
桃源县|
新竹县|
萝北县|
清流县|
梅州市|
台中市|
通道|
临沧市|
林甸县|
游戏|
天气|
阳东县|
朝阳县|
霍山县|
迭部县|
三门峡市|
桐城市|
巴东县|
沽源县|
武夷山市|
安顺市|
航空|
白山市|
四平市|
揭阳市|
开江县|
北宁市|
牡丹江市|
和硕县|
共和县|
大连市|
沭阳县|
淮北市|
和龙市|
东阳市|
河曲县|
舟曲县|
凤山县|
遂昌县|